[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table
From: |
David Gibson |
Subject: |
Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset |
Date: |
Tue, 24 Mar 2015 17:54:02 +1100 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
On Tue, Mar 24, 2015 at 05:24:55PM +1100, Gavin Shan wrote:
> On Tue, Mar 24, 2015 at 04:41:21PM +1100, David Gibson wrote:
> >On Mon, Mar 23, 2015 at 04:25:10PM +1100, Gavin Shan wrote:
> >> On Mon, Mar 23, 2015 at 04:06:56PM +1100, David Gibson wrote:
> >> >On Fri, Mar 20, 2015 at 05:27:29PM +1100, Gavin Shan wrote:
> >> >> On Fri, Mar 20, 2015 at 05:04:01PM +1100, David Gibson wrote:
> >> >> >On Tue, Mar 17, 2015 at 03:31:24AM +1100, Gavin Shan wrote:
> >> >> >> The PCI device MSIx table is cleaned out in hardware after EEH PE
> >> >> >> reset. However, we still hold the stale MSIx entries in QEMU, which
> >> >> >> should be cleared accordingly. Otherwise, we will run into another
> >> >> >> (recursive) EEH error and the PCI devices contained in the PE have
> >> >> >> to be offlined exceptionally.
> >> >> >>
> >> >> >> The patch clears stale MSIx table before EEH PE reset so that MSIx
> >> >> >> table could be restored properly after EEH PE reset.
> >> >> >>
> >> >> >> Signed-off-by: Gavin Shan <address@hidden>
> >> >> >> ---
> >> >> >> v2: vfio_container_eeh_event() stub for !CONFIG_PCI and separate
> >> >> >> error message for this function. Dropped vfio_put_group()
> >> >> >> on NULL group
> >> >> >> ---
> >> >> >> hw/vfio/Makefile.objs | 6 +++++-
> >> >> >> hw/vfio/common.c | 7 +++++++
> >> >> >> hw/vfio/pci-stub.c | 17 +++++++++++++++++
> >> >> >> hw/vfio/pci.c | 38 ++++++++++++++++++++++++++++++++++++++
> >> >> >> include/hw/vfio/vfio.h | 2 ++
> >> >> >> 5 files changed, 69 insertions(+), 1 deletion(-)
> >> >> >> create mode 100644 hw/vfio/pci-stub.c
> >> >> >>
> >> >> >> diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
> >> >> >> index e31f30e..1b8a065 100644
> >> >> >> --- a/hw/vfio/Makefile.objs
> >> >> >> +++ b/hw/vfio/Makefile.objs
> >> >> >> @@ -1,4 +1,8 @@
> >> >> >> ifeq ($(CONFIG_LINUX), y)
> >> >> >> obj-$(CONFIG_SOFTMMU) += common.o
> >> >> >> -obj-$(CONFIG_PCI) += pci.o
> >> >> >> +ifeq ($(CONFIG_PCI), y)
> >> >> >> +obj-y += pci.o
> >> >> >> +else
> >> >> >> +obj-y += pci-stub.o
> >> >> >> +endif
> >> >> >> endif
> >> >> >> diff --git a/hw/vfio/common.c b/hw/vfio/common.c
> >> >> >> index 148eb53..ed07814 100644
> >> >> >> --- a/hw/vfio/common.c
> >> >> >> +++ b/hw/vfio/common.c
> >> >> >> @@ -949,7 +949,14 @@ int vfio_container_ioctl(AddressSpace *as,
> >> >> >> int32_t groupid,
> >> >> >> switch (req) {
> >> >> >> case VFIO_CHECK_EXTENSION:
> >> >> >> case VFIO_IOMMU_SPAPR_TCE_GET_INFO:
> >> >> >> + break;
> >> >> >> case VFIO_EEH_PE_OP:
> >> >> >> + if (vfio_container_eeh_event(as, groupid, param) != 0) {
> >> >> >
> >> >> >I really dislike the idea of having an arbitrarily complex side effect
> >> >> >from a function whose name suggest's it's just a trivial wrapper
> >> >> >around the ioctl().
> >> >> >
> >> >>
> >> >> Ok. I guess you would like putting the complex in the callers of
> >> >> vfio_container_ioctl().
> >> >
> >> >Well.. maybe. I'd also be happy if helper functions were implemeneted
> >> >which both called the ioctl() and did the other necessary pieces.
> >> >They should just be called something that indicates their full
> >> >function, not a name which suggests they're just an ioctl wrapper.
> >> >
> >>
> >> Indeed, vfio_container_ioctl() isn't indicating what the function is doing.
> >> How about renaming it to vfio_container_event_and_ioctl()? I'm always bad
> >> at giving a good function name :)
> >
> >Well, I don't think your wrapper should be multiplexed. The multiplex
> >works for the simple ioctl() wrapper, because there really is nothing
> >that varies apart from the exact ioctl number called.
> >
> >But now that you have different operations here, I think you want
> >wrappers for each one - each one will call the ioctl(), then do the
> >specific extra steps necessary for that operation. So
> >vfio_container_event() will go away as well, split into various other
> >functions.
> >
>
> It wouldn't a good idea if I understand your proposal correctly. Currnetly,
> the global function vfio_container_ioctl() can be called from sPAPR platform
> for any ioctl commands handled in kernel source file vfio_iommu_spapr_tce.c,
> which means the function isn't called for EEH only. Other sPAPR TCE container
> ioctl commands are also routed by this function. There will be lots if having
> one global function for each ioctl commands, which just improve the cost to
> maintain the code.
I don't really follow your objection. I'm only suggesting separate
wrappers for things which require extra actions currently implemented
in vfio_container_event(). Things which only ned the plain ioctl()
can still use the simple vfio_container_ioctl() wrapper.
> Alternatively, we might expose another function vfio_container_eeh_ioctl(),
> which calls vfio_container_ioctl() after doing what we did in
> vfio_container_event()
> if necessary.
>
> Thanks,
> Gavin
>
>
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
pgpDBB2D4o3a7.pgp
Description: PGP signature
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 2/3] VFIO: Disable INTx interrupt on EEH reset, (continued)
- Re: [Qemu-devel] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Alex Williamson, 2015/03/17
- Re: [Qemu-devel] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/20
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/20
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/23
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/23
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/24
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/24
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset,
David Gibson <=
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Alex Williamson, 2015/03/24
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/25
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/25
- Re: [Qemu-devel] [Qemu-ppc] [PATCH v2 1/3] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/25