[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RFC v4 8/9] vfio-pci: pass the aer error to guest
From: |
Chen Fan |
Subject: |
[Qemu-devel] [RFC v4 8/9] vfio-pci: pass the aer error to guest |
Date: |
Mon, 2 Mar 2015 15:16:11 +0800 |
when the vfio device encounters an uncorrectable error in host,
the vfio_pci driver will signal the eventfd registered by this
vfio device, the results in the qemu eventfd handler getting
invoked.
this patch is to pass the error to guest and have the guest driver
recover from the error.
Signed-off-by: Chen Fan <address@hidden>
---
hw/vfio/pci.c | 36 ++++++++++++++++++++++++++++++------
1 file changed, 30 insertions(+), 6 deletions(-)
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 5471437..5669c55 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -3241,18 +3241,42 @@ static void vfio_put_device(VFIOPCIDevice *vdev)
static void vfio_err_notifier_handler(void *opaque)
{
VFIOPCIDevice *vdev = opaque;
+ PCIDevice *dev = &vdev->pdev;
+ PCIEAERMsg msg = {
+ .severity = 0,
+ .source_id = (pci_bus_num(dev->bus) << 8) | dev->devfn,
+ };
if (!event_notifier_test_and_clear(&vdev->err_notifier)) {
return;
}
+ /* we should read the error details from the real hardware
+ * configuration spaces, here we only need to do is signaling
+ * to guest an uncorrectable error has occurred.
+ */
+ if (pci_is_express(dev) &&
+ pci_bus_is_express(dev->bus) &&
+ dev->exp.aer_cap) {
+ uint8_t *aer_cap = dev->config + dev->exp.aer_cap;
+ uint32_t uncor_status;
+ bool isfatal;
+
+ uncor_status = vfio_pci_read_config(dev,
+ dev->exp.aer_cap + PCI_ERR_UNCOR_STATUS, 4);
+
+ isfatal = uncor_status & pci_get_long(aer_cap + PCI_ERR_UNCOR_SEVER);
+
+ msg.severity = isfatal ? PCI_ERR_ROOT_CMD_FATAL_EN :
+ PCI_ERR_ROOT_CMD_NONFATAL_EN;
+
+ pcie_aer_msg(dev, &msg);
+ return;
+ }
+
/*
- * TBD. Retrieve the error details and decide what action
- * needs to be taken. One of the actions could be to pass
- * the error to the guest and have the guest driver recover
- * from the error. This requires that PCIe capabilities be
- * exposed to the guest. For now, we just terminate the
- * guest to contain the error.
+ * If the aer capability is not exposed to the guest. we just
+ * terminate the guest to contain the error.
*/
error_report("%s(%04x:%02x:%02x.%x) Unrecoverable error detected. "
--
1.9.3
- [Qemu-devel] [RFC v4 4/9] aer: impove pcie_aer_init to support vfio device, (continued)
- [Qemu-devel] [RFC v4 7/9] pcie_aer: expose pcie_aer_msg() interface, Chen Fan, 2015/03/02
- [Qemu-devel] [RFC v4 5/9] vfio: add aer support for vfio device, Chen Fan, 2015/03/02
- [Qemu-devel] [RFC v4 8/9] vfio-pci: pass the aer error to guest,
Chen Fan <=
- [Qemu-devel] [RFC v4 9/9] pcie: fix several trivial typos, Chen Fan, 2015/03/02
- Re: [Qemu-devel] [RFC v4 0/9] pass aer error to guest for vfio device, Chen Fan, 2015/03/08
- Re: [Qemu-devel] [RFC v4 0/9] pass aer error to guest for vfio device, Alex Williamson, 2015/03/09