qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH 1/3] Add specific config options for PCI-E bridg


From: Peter Crosthwaite
Subject: Re: [Qemu-devel] [PATCH 1/3] Add specific config options for PCI-E bridges
Date: Tue, 24 Feb 2015 08:44:40 -0800

On Tue, Feb 24, 2015 at 12:55 AM, David Gibson
<address@hidden> wrote:
> On Mon, Feb 23, 2015 at 10:17:58PM -0800, Peter Crosthwaite wrote:
>> On Mon, Feb 23, 2015 at 3:05 PM, David Gibson
>> <address@hidden> wrote:
>> > The i82801b11, ioh3420 and xio3130 PCI Express devices are currently
>> > included in the build unconditionally.
>> >
>> > While they could theoretically appear on any target platform with PCI-E,
>> > they're pretty unlikely to appear on platforms that aren't Intel derived.
>> >
>> > Therefore, to avoid presenting unlikely-to-be-relevant devices to the user,
>> > add config options to enable these componenets, and enable they by default
>>
>> "components", "them"
>
> Oops, those are embarrassing.
>
>> > only on x86 and arm platforms.
>> >
>> > (Note that this patch does include these for aarch64, via its inclusion of
>> > arm-softmmu.mak).
>> >
>>
>> "it's"
>
> No, "its" is correct.  It's a possessive, not a contraction.
>

OK, my bad.

Regards,
Peter

>> > Signed-off-by: David Gibson <address@hidden>
>>
>> Otherwise,
>>
>> Reviewed-by: Peter Crosthwaite <address@hidden>
>>
>> > ---
>> >  default-configs/arm-softmmu.mak    | 4 ++++
>> >  default-configs/i386-softmmu.mak   | 3 +++
>> >  default-configs/x86_64-softmmu.mak | 3 +++
>> >  hw/pci-bridge/Makefile.objs        | 5 +++--
>> >  4 files changed, 13 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/default-configs/arm-softmmu.mak 
>> > b/default-configs/arm-softmmu.mak
>> > index b00c2e1..6ee9b43 100644
>> > --- a/default-configs/arm-softmmu.mak
>> > +++ b/default-configs/arm-softmmu.mak
>> > @@ -91,3 +91,7 @@ CONFIG_INTEGRATOR_DEBUG=y
>> >  CONFIG_ALLWINNER_A10_PIT=y
>> >  CONFIG_ALLWINNER_A10_PIC=y
>> >  CONFIG_ALLWINNER_A10=y
>> > +
>> > +CONFIG_XIO3130=y
>> > +CONFIG_IOH3420=y
>> > +CONFIG_I82801B11=y
>> > diff --git a/default-configs/i386-softmmu.mak 
>> > b/default-configs/i386-softmmu.mak
>> > index bd99af9..0b8ce4b 100644
>> > --- a/default-configs/i386-softmmu.mak
>> > +++ b/default-configs/i386-softmmu.mak
>> > @@ -43,3 +43,6 @@ CONFIG_IOAPIC=y
>> >  CONFIG_ICC_BUS=y
>> >  CONFIG_PVPANIC=y
>> >  CONFIG_MEM_HOTPLUG=y
>> > +CONFIG_XIO3130=y
>> > +CONFIG_IOH3420=y
>> > +CONFIG_I82801B11=y
>> > diff --git a/default-configs/x86_64-softmmu.mak 
>> > b/default-configs/x86_64-softmmu.mak
>> > index e7c2734..6add04a 100644
>> > --- a/default-configs/x86_64-softmmu.mak
>> > +++ b/default-configs/x86_64-softmmu.mak
>> > @@ -43,3 +43,6 @@ CONFIG_IOAPIC=y
>> >  CONFIG_ICC_BUS=y
>> >  CONFIG_PVPANIC=y
>> >  CONFIG_MEM_HOTPLUG=y
>> > +CONFIG_XIO3130=y
>> > +CONFIG_IOH3420=y
>> > +CONFIG_I82801B11=y
>> > diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
>> > index 968b369..96c596e 100644
>> > --- a/hw/pci-bridge/Makefile.objs
>> > +++ b/hw/pci-bridge/Makefile.objs
>> > @@ -1,5 +1,6 @@
>> >  common-obj-y += pci_bridge_dev.o
>> > -common-obj-y += ioh3420.o xio3130_upstream.o xio3130_downstream.o
>> > -common-obj-y += i82801b11.o
>> > +common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
>> > +common-obj-$(CONFIG_IOH3420) += ioh3420.o
>> > +common-obj-$(CONFIG_I82801B11) += i82801b11.o
>> >  # NewWorld PowerMac
>> >  common-obj-$(CONFIG_DEC_PCI) += dec.o
>> >
>> >
>>
>
> --
> David Gibson                    | I'll have my music baroque, and my code
> david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
>                                 | _way_ _around_!
> http://www.ozlabs.org/~dgibson



reply via email to

[Prev in Thread] Current Thread [Next in Thread]