[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6 5/5] pc: acpi-build: simplify PCI bus tree ge
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH v6 5/5] pc: acpi-build: simplify PCI bus tree generation |
Date: |
Wed, 28 Jan 2015 16:53:36 +0100 |
On Wed, 28 Jan 2015 17:21:21 +0200
"Michael S. Tsirkin" <address@hidden> wrote:
> On Wed, Jan 28, 2015 at 02:34:50PM +0000, Igor Mammedov wrote:
> > it basicaly does the same as original approach,
> > * just without bus/notify tables tracking (less obscure)
> > which is easier to follow.
> > * drops unnecessary loops and bitmaps,
> > creating devices and notification method in the same loop.
> > * saves us ~100LOC
> >
> > Signed-off-by: Igor Mammedov <address@hidden>
> > Reviewed-by: Marcel Apfelbaum <address@hidden>
> > ---
> > v4:
> > * keep original logic of creating bridge devices as it was done
> > in 133a2da48 "pc: acpi: generate AML only for PCI0 ..."
> > * if bus is non hotpluggable, add child slots to bus as non
> > hotpluggable as it was done in original code.
> > v3:
> > * use hotpluggable device object instead of not hotpluggable
> > for non present devices, and add it only when bus itself is
> > hotpluggable
> > ---
> > hw/i386/acpi-build.c | 275
> > +++++++++++++++++----------------------------------
> > 1 file changed, 90 insertions(+), 185 deletions(-)
> >
> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> > index b36ac45..c5d1eba 100644
> > --- a/hw/i386/acpi-build.c
> > +++ b/hw/i386/acpi-build.c
> > @@ -106,7 +106,6 @@ typedef struct AcpiPmInfo {
> > typedef struct AcpiMiscInfo {
> > bool has_hpet;
> > bool has_tpm;
> > - DECLARE_BITMAP(slot_hotplug_enable, PCI_SLOT_MAX);
> > const unsigned char *dsdt_code;
> > unsigned dsdt_size;
> > uint16_t pvpanic_port;
> > @@ -650,69 +649,37 @@ static void acpi_set_pci_info(void)
> > }
> > }
> >
> > -static void build_pci_bus_state_init(AcpiBuildPciBusHotplugState *state,
> > - AcpiBuildPciBusHotplugState *parent,
> > - bool pcihp_bridge_en)
> > +static void build_append_pcihp_notify_entry(GArray *method, int slot)
> > {
> > - state->parent = parent;
> > - state->device_table = build_alloc_array();
> > - state->notify_table = build_alloc_array();
> > - state->pcihp_bridge_en = pcihp_bridge_en;
> > -}
> > -
> > -static void build_pci_bus_state_cleanup(AcpiBuildPciBusHotplugState *state)
> > -{
> > - build_free_array(state->device_table);
> > - build_free_array(state->notify_table);
> > -}
> > + GArray *ifctx;
> >
> > -static void *build_pci_bus_begin(PCIBus *bus, void *parent_state)
> > -{
> > - AcpiBuildPciBusHotplugState *parent = parent_state;
> > - AcpiBuildPciBusHotplugState *child = g_malloc(sizeof *child);
> > -
> > - build_pci_bus_state_init(child, parent, parent->pcihp_bridge_en);
> > + ifctx = build_alloc_array();
> > + build_append_byte(ifctx, 0x7B); /* AndOp */
> > + build_append_byte(ifctx, 0x68); /* Arg0Op */
> > + build_append_int(ifctx, 0x1U << slot);
> > + build_append_byte(ifctx, 0x00); /* NullName */
> > + build_append_byte(ifctx, 0x86); /* NotifyOp */
> > + build_append_namestring(ifctx, "S%.02X", PCI_DEVFN(slot, 0));
> > + build_append_byte(ifctx, 0x69); /* Arg1Op */
> >
> > - return child;
> > + /* Pack it up */
> > + build_package(ifctx, 0xA0 /* IfOp */);
> > + build_append_array(method, ifctx);
> > + build_free_array(ifctx);
> > }
> >
> > -static void build_pci_bus_end(PCIBus *bus, void *bus_state)
> > +static void build_append_pci_bus_devices(GArray *parent_scope, PCIBus *bus,
> > + bool pcihp_bridge_en)
> > {
> > - AcpiBuildPciBusHotplugState *child = bus_state;
> > - AcpiBuildPciBusHotplugState *parent = child->parent;
> > GArray *bus_table = build_alloc_array();
> > - DECLARE_BITMAP(slot_hotplug_enable, PCI_SLOT_MAX);
> > - DECLARE_BITMAP(slot_device_present, PCI_SLOT_MAX);
> > - DECLARE_BITMAP(slot_device_system, PCI_SLOT_MAX);
> > - DECLARE_BITMAP(slot_device_vga, PCI_SLOT_MAX);
> > - DECLARE_BITMAP(slot_device_qxl, PCI_SLOT_MAX);
> > - uint8_t op;
> > - int i;
> > + GArray *method = NULL;
> > QObject *bsel;
> > - GArray *method;
> > - bool bus_hotplug_support = false;
> > -
> > - /*
> > - * Skip bridge subtree creation if bridge hotplug is disabled
> > - * to make acpi tables compatible with legacy machine types.
> > - */
> > - if (!child->pcihp_bridge_en && bus->parent_dev) {
> > - return;
> > - }
> > + PCIBus *sec;
> > + int i;
> >
> > if (bus->parent_dev) {
> > - op = 0x82; /* DeviceOp */
> > - build_append_namestring(bus_table, "S%.02X",
> > - bus->parent_dev->devfn);
> > - build_append_byte(bus_table, 0x08); /* NameOp */
> > - build_append_namestring(bus_table, "_SUN");
> > - build_append_value(bus_table, PCI_SLOT(bus->parent_dev->devfn), 1);
> > - build_append_byte(bus_table, 0x08); /* NameOp */
> > - build_append_namestring(bus_table, "_ADR");
> > - build_append_value(bus_table, (PCI_SLOT(bus->parent_dev->devfn) <<
> > 16) |
> > - PCI_FUNC(bus->parent_dev->devfn), 4);
> > + build_append_namestring(bus_table, "S%.02X_",
> > bus->parent_dev->devfn);
> > } else {
> > - op = 0x10; /* ScopeOp */;
> > build_append_namestring(bus_table, "PCI0");
> > }
> >
> > @@ -721,17 +688,9 @@ static void build_pci_bus_end(PCIBus *bus, void
> > *bus_state)
> > build_append_byte(bus_table, 0x08); /* NameOp */
> > build_append_namestring(bus_table, "BSEL");
> > build_append_int(bus_table, qint_get_int(qobject_to_qint(bsel)));
> > - memset(slot_hotplug_enable, 0xff, sizeof slot_hotplug_enable);
> > - } else {
> > - /* No bsel - no slots are hot-pluggable */
> > - memset(slot_hotplug_enable, 0x00, sizeof slot_hotplug_enable);
> > + method = build_alloc_method("DVNT", 2);
> > }
> >
> > - memset(slot_device_present, 0x00, sizeof slot_device_present);
> > - memset(slot_device_system, 0x00, sizeof slot_device_present);
> > - memset(slot_device_vga, 0x00, sizeof slot_device_vga);
> > - memset(slot_device_qxl, 0x00, sizeof slot_device_qxl);
> > -
> > for (i = 0; i < ARRAY_SIZE(bus->devices); i += PCI_FUNC_MAX) {
> > DeviceClass *dc;
> > PCIDeviceClass *pc;
> > @@ -740,152 +699,104 @@ static void build_pci_bus_end(PCIBus *bus, void
> > *bus_state)
> > bool bridge_in_acpi;
> >
> > if (!pdev) {
> > + if (bsel) {
> > + void *pcihp = acpi_data_push(bus_table, ACPI_PCIHP_SIZEOF);
> > + memcpy(pcihp, ACPI_PCIHP_AML, ACPI_PCIHP_SIZEOF);
> > + patch_pcihp(slot, pcihp);
> > +
> > + build_append_pcihp_notify_entry(method, slot);
> > + } else {
> > + /* no much sense to create empty non hotpluggable slots,
> > + * but it's what original code did before. TODO: remove it.
>
> You can't remove it.
> Check the commit log, and you will know why.
I'll drop comment.
>
> > + */
> > + void *pcihp = acpi_data_push(bus_table,
> > ACPI_PCINOHP_SIZEOF);
> > + memcpy(pcihp, ACPI_PCINOHP_AML, ACPI_PCINOHP_SIZEOF);
> > + patch_pcinohp(slot, pcihp);
> > + }
> > continue;
> > }
> >
> > - set_bit(slot, slot_device_present);
> > pc = PCI_DEVICE_GET_CLASS(pdev);
> > dc = DEVICE_GET_CLASS(pdev);
> >
> > - /* When hotplug for bridges is enabled, bridges are
> > - * described in ACPI separately (see build_pci_bus_end).
> > - * In this case they aren't themselves hot-pluggable.
> > - */
> > - bridge_in_acpi = pc->is_bridge && child->pcihp_bridge_en;
> > -
> > - if (pc->class_id == PCI_CLASS_BRIDGE_ISA || bridge_in_acpi) {
> > - set_bit(slot, slot_device_system);
> > + if (pc->class_id == PCI_CLASS_BRIDGE_ISA) {
> > + continue;
> > }
> > + bridge_in_acpi = pc->is_bridge && pcihp_bridge_en;
> >
> > if (pc->class_id == PCI_CLASS_DISPLAY_VGA) {
> > - set_bit(slot, slot_device_vga);
> >
> > if (object_dynamic_cast(OBJECT(pdev), "qxl-vga")) {
> > - set_bit(slot, slot_device_qxl);
> > + void *pcihp = acpi_data_push(bus_table,
> > + ACPI_PCIQXL_SIZEOF);
> > + memcpy(pcihp, ACPI_PCIQXL_AML, ACPI_PCIQXL_SIZEOF);
> > + patch_pciqxl(slot, pcihp);
> > + } else {
> > + void *pcihp = acpi_data_push(bus_table,
> > + ACPI_PCIVGA_SIZEOF);
> > + memcpy(pcihp, ACPI_PCIVGA_AML, ACPI_PCIVGA_SIZEOF);
> > + patch_pcivga(slot, pcihp);
> > }
> > - }
> > -
> > - if (!dc->hotpluggable || bridge_in_acpi) {
> > - clear_bit(slot, slot_hotplug_enable);
> > - }
> > - }
> > -
> > - /* Append Device object for each slot */
> > - for (i = 0; i < PCI_SLOT_MAX; i++) {
> > - bool can_eject = test_bit(i, slot_hotplug_enable);
> > - bool present = test_bit(i, slot_device_present);
> > - bool vga = test_bit(i, slot_device_vga);
> > - bool qxl = test_bit(i, slot_device_qxl);
> > - bool system = test_bit(i, slot_device_system);
> > - if (can_eject) {
> > - void *pcihp = acpi_data_push(bus_table,
> > - ACPI_PCIHP_SIZEOF);
> > + } else if (dc->hotpluggable && !bridge_in_acpi) {
> > + void *pcihp = acpi_data_push(bus_table, ACPI_PCIHP_SIZEOF);
> > memcpy(pcihp, ACPI_PCIHP_AML, ACPI_PCIHP_SIZEOF);
> > - patch_pcihp(i, pcihp);
> > - bus_hotplug_support = true;
> > - } else if (qxl) {
> > - void *pcihp = acpi_data_push(bus_table,
> > - ACPI_PCIQXL_SIZEOF);
> > - memcpy(pcihp, ACPI_PCIQXL_AML, ACPI_PCIQXL_SIZEOF);
> > - patch_pciqxl(i, pcihp);
> > - } else if (vga) {
> > - void *pcihp = acpi_data_push(bus_table,
> > - ACPI_PCIVGA_SIZEOF);
> > - memcpy(pcihp, ACPI_PCIVGA_AML, ACPI_PCIVGA_SIZEOF);
> > - patch_pcivga(i, pcihp);
> > - } else if (system) {
> > - /* Nothing to do: system devices are in DSDT or in SSDT above.
> > */
> > - } else if (present) {
> > - void *pcihp = acpi_data_push(bus_table,
> > - ACPI_PCINOHP_SIZEOF);
> > - memcpy(pcihp, ACPI_PCINOHP_AML, ACPI_PCINOHP_SIZEOF);
> > - patch_pcinohp(i, pcihp);
> > - }
> > - }
> > -
> > - if (bsel) {
> > - method = build_alloc_method("DVNT", 2);
> > -
> > - for (i = 0; i < PCI_SLOT_MAX; i++) {
> > - GArray *notify;
> > - uint8_t op;
> > + patch_pcihp(slot, pcihp);
> >
> > - if (!test_bit(i, slot_hotplug_enable)) {
> > - continue;
> > + if (bsel) {
> > + build_append_pcihp_notify_entry(method, slot);
> > }
> > + } else {
> > + void *pcihp = acpi_data_push(bus_table, ACPI_PCINOHP_SIZEOF);
> > + memcpy(pcihp, ACPI_PCINOHP_AML, ACPI_PCINOHP_SIZEOF);
> > + patch_pcinohp(slot, pcihp);
> >
> > - notify = build_alloc_array();
> > - op = 0xA0; /* IfOp */
> > -
> > - build_append_byte(notify, 0x7B); /* AndOp */
> > - build_append_byte(notify, 0x68); /* Arg0Op */
> > - build_append_int(notify, 0x1U << i);
> > - build_append_byte(notify, 0x00); /* NullName */
> > - build_append_byte(notify, 0x86); /* NotifyOp */
> > - build_append_namestring(notify, "S%.02X", PCI_DEVFN(i, 0));
> > - build_append_byte(notify, 0x69); /* Arg1Op */
> > -
> > - /* Pack it up */
> > - build_package(notify, op);
> > -
> > - build_append_array(method, notify);
> > + /* When hotplug for bridges is enabled, bridges that are
> > + * described in ACPI separately aren't themselves
> > hot-pluggable.
> > + */
> > + if (bridge_in_acpi) {
> > + PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(pdev));
> >
> > - build_free_array(notify);
> > + build_append_pci_bus_devices(bus_table, sec_bus,
> > + pcihp_bridge_en);
> > + }
> > }
> > + }
> >
> > + if (bsel) {
> > build_append_and_cleanup_method(bus_table, method);
> > }
> >
> > /* Append PCNT method to notify about events on local and child buses.
> > * Add unconditionally for root since DSDT expects it.
> > */
> > - if (bus_hotplug_support || child->notify_table->len ||
> > !bus->parent_dev) {
> > - method = build_alloc_method("PCNT", 0);
> > -
> > - /* If bus supports hotplug select it and notify about local events
> > */
> > - if (bsel) {
> > - build_append_byte(method, 0x70); /* StoreOp */
> > - build_append_int(method, qint_get_int(qobject_to_qint(bsel)));
> > - build_append_namestring(method, "BNUM");
> > - build_append_namestring(method, "DVNT");
> > - build_append_namestring(method, "PCIU");
> > - build_append_int(method, 1); /* Device Check */
> > - build_append_namestring(method, "DVNT");
> > - build_append_namestring(method, "PCID");
> > - build_append_int(method, 3); /* Eject Request */
> > - }
> > -
> > - /* Notify about child bus events in any case */
> > - build_append_array(method, child->notify_table);
> > -
> > - build_append_and_cleanup_method(bus_table, method);
> > -
> > - /* Append description of child buses */
> > - build_append_array(bus_table, child->device_table);
> > + method = build_alloc_method("PCNT", 0);
> >
> > - /* Pack it up */
> > - if (bus->parent_dev) {
> > - build_extop_package(bus_table, op);
> > - } else {
> > - build_package(bus_table, op);
> > - }
> > -
> > - /* Append our bus description to parent table */
> > - build_append_array(parent->device_table, bus_table);
> > + /* If bus supports hotplug select it and notify about local events */
> > + if (bsel) {
> > + build_append_byte(method, 0x70); /* StoreOp */
> > + build_append_int(method, qint_get_int(qobject_to_qint(bsel)));
> > + build_append_namestring(method, "BNUM");
> > + build_append_namestring(method, "DVNT");
> > + build_append_namestring(method, "PCIU");
> > + build_append_int(method, 1); /* Device Check */
> > + build_append_namestring(method, "DVNT");
> > + build_append_namestring(method, "PCID");
> > + build_append_int(method, 3); /* Eject Request */
> > + }
> >
> > - /* Also tell parent how to notify us, invoking PCNT method.
> > - * At the moment this is not needed for root as we have a single
> > root.
> > - */
> > - if (bus->parent_dev) {
> > - build_append_namestring(parent->notify_table, "^PCNT.S%.02X",
> > - bus->parent_dev->devfn);
> > + /* Notify about child bus events in any case */
> > + if (pcihp_bridge_en) {
> > + QLIST_FOREACH(sec, &bus->child, sibling) {
> > + build_append_namestring(method, "^S%.02X.PCNT",
> > + sec->parent_dev->devfn);
> > }
> > }
> >
> > - qobject_decref(bsel);
> > + build_append_and_cleanup_method(bus_table, method);
> > +
> > + build_package(bus_table, 0x10); /* ScopeOp */
>
> So we have scope even if it's a non root device.
> I'd prefer it that we put everything in the device
> directly, when later you rewrite DSDT as well,
> you will be able to do it for root as well.
yes, I did exactly this in AML series.
So lets leave this as it is, AML series will convert it to
Device(bridge) { child_socket_devices... }
format
>
>
> > + build_append_array(parent_scope, bus_table);
> > build_free_array(bus_table);
> > - build_pci_bus_state_cleanup(child);
> > - g_free(child);
> > }
> >
> > static void patch_pci_windows(PcPciInfo *pci, uint8_t *start, unsigned
> > size)
> > @@ -1017,7 +928,6 @@ build_ssdt(GArray *table_data, GArray *linker,
> > }
> >
> > {
> > - AcpiBuildPciBusHotplugState hotplug_state;
> > Object *pci_host;
> > PCIBus *bus = NULL;
> > bool ambiguous;
> > @@ -1027,16 +937,11 @@ build_ssdt(GArray *table_data, GArray *linker,
> > bus = PCI_HOST_BRIDGE(pci_host)->bus;
> > }
> >
> > - build_pci_bus_state_init(&hotplug_state, NULL,
> > pm->pcihp_bridge_en);
> > -
> > if (bus) {
> > /* Scan all PCI buses. Generate tables to support hotplug.
> > */
> > - pci_for_each_bus_depth_first(bus, build_pci_bus_begin,
> > - build_pci_bus_end,
> > &hotplug_state);
> > + build_append_pci_bus_devices(sb_scope, bus,
> > + pm->pcihp_bridge_en);
> > }
> > -
> > - build_append_array(sb_scope, hotplug_state.device_table);
> > - build_pci_bus_state_cleanup(&hotplug_state);
> > }
> > build_package(sb_scope, op);
> > build_append_array(table_data, sb_scope);
> > --
> > 1.8.3.1
[Qemu-devel] [PATCH v6 2/5] acpi: move generic aml building helpers into dedictated file, Igor Mammedov, 2015/01/28