[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH RFC] e1000: defer packets until BM enabled
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH RFC] e1000: defer packets until BM enabled |
Date: |
Mon, 1 Dec 2014 20:05:16 +0200 |
On Mon, Dec 01, 2014 at 06:01:18PM +0000, Gabriel Somlo wrote:
> Hi Michael,
>
> I had to make some small changes to get this patch to build successfully,
> see inline below:
Ouch, looks like I sent out a stale version:
git commit
build+edit
git format-patch (without git commit)
Happens to me now and again :(
Sorry.
> On Monday, December 01, 2014 11:50am, Michael S. Tsirkin address@hidden wrote:
> >
> > Some guests seem to set BM for e1000 after
> > enabling RX.
> > If packets arrive in the window, device is wedged.
> > Probably works by luck on real hardware, work around
> > this by making can_receive depend on BM.
> >
> > Signed-off-by: Michael S. Tsirkin <address@hidden>
> > ---
> > hw/net/e1000.c | 20 +++++++++++++++++++-
> > 1 file changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/hw/net/e1000.c b/hw/net/e1000.c
> > index e33a4da..34625ac 100644
> > --- a/hw/net/e1000.c
> > +++ b/hw/net/e1000.c
> > @@ -923,7 +923,9 @@ e1000_can_receive(NetClientState *nc)
> > E1000State *s = qemu_get_nic_opaque(nc);
> >
> > return (s->mac_reg[STATUS] & E1000_STATUS_LU) &&
> > - (s->mac_reg[RCTL] & E1000_RCTL_EN) && e1000_has_rxbufs(s, 1);
> > + (s->mac_reg[RCTL] & E1000_RCTL_EN) &&
> > + (s->parent_obj.config[PCI_COMMAND] & PCI_COMMAND_MASTER) &&
> > + e1000_has_rxbufs(s, 1);
> > }
> >
> > static uint64_t rx_desc_base(E1000State *s)
> > @@ -1529,6 +1531,20 @@ static NetClientInfo net_e1000_info = {
> > .link_status_changed = e1000_set_link_status,
> > };
> >
> > +static void e1000_write_config(PCIDevice *pci_dev, uint32_t address,
> > + uint32_t val, int len)
> > +{
> > + E1000State *d = E1000(dev);
>
> s/dev/pci_dev/
>
> > +
> > + pci_default_write_config(pci_dev, address, val, len);
> > +
> > + if (range_covers_byte(address, len, PCI_COMMAND) &&
>
> requires #include "qemu/range.h" at the top of e1000.c
>
> > + (pci_dev->config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
> > + qemu_flush_queued_packets(qemu_get_queue(s->nic));
>
> s/s->nic/d->nic/
>
> > + }
> > +}
> > +
> > +
> > static int pci_e1000_init(PCIDevice *pci_dev)
> > {
> > DeviceState *dev = DEVICE(pci_dev);
> > @@ -1539,6 +1555,8 @@ static int pci_e1000_init(PCIDevice *pci_dev)
> > int i;
> > uint8_t *macaddr;
> >
> > + pci_dev->config_write = e1000_write_config;
> > +
> > pci_conf = pci_dev->config;
> >
> > /* TODO: RST# value should be 0, PCI spec 6.2.4 */
> > --
>
> With this, I can confirm everything still works fine on both Mavericks and
> F21-beta-live. So:
>
> Tested-by: Gabriel Somlo <address@hidden>
>
> Regards,
> --Gabriel
Thanks!