[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 4/4] raw-posix: Clean up around raw_co_get_block_
From: |
Markus Armbruster |
Subject: |
[Qemu-devel] [PATCH v2 4/4] raw-posix: Clean up around raw_co_get_block_status() |
Date: |
Thu, 13 Nov 2014 11:17:03 +0100 |
try_seek_hole() doesn't really seek to a hole, it tries to find out
whether its argument is in a hole or not, and where the hole or
non-hole ends. Rename to find_allocation() and add a proper function
comment.
Using arguments passed by reference like local variables is a bad
habit. Only assign to them right before return.
Avoid nesting of conditionals.
When find_allocation() fails, don't make up a range that'll get mapped
to nb_sectors, simply set *pnum = nb_sectors directly.
Don't repeat BDRV_BLOCK_OFFSET_VALID | start.
Drop a pointless assertion, add some meaningful ones.
Signed-off-by: Markus Armbruster <address@hidden>
---
block/raw-posix.c | 62 +++++++++++++++++++++++++++++++++----------------------
1 file changed, 37 insertions(+), 25 deletions(-)
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 2a12a50..ea5b3b8 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -1478,28 +1478,43 @@ out:
return result;
}
-static int try_seek_hole(BlockDriverState *bs, off_t start, off_t *data,
- off_t *hole)
+/*
+ * Find allocation range in @bs around offset @start.
+ * If @start is in a hole, store @start in @hole and the end of the
+ * hole in @data, and return 0.
+ * If @start is in a data, store @start to @data, and the end of the
+ * data to @hole, and return 0.
+ * If we can't find out, return -errno.
+ */
+static int find_allocation(BlockDriverState *bs, off_t start,
+ off_t *data, off_t *hole)
{
#if defined SEEK_HOLE && defined SEEK_DATA
BDRVRawState *s = bs->opaque;
+ off_t offs;
- *hole = lseek(s->fd, start, SEEK_HOLE);
- if (*hole == -1) {
+ offs = lseek(s->fd, start, SEEK_HOLE);
+ if (offs < 0) {
return -errno;
}
+ assert(offs >= start);
- if (*hole > start) {
+ if (offs > start) {
+ /* in data, next hole at offs */
*data = start;
- } else {
- /* On a hole. We need another syscall to find its end. */
- *data = lseek(s->fd, start, SEEK_DATA);
- if (*data < 0) {
- /* no idea where the hole ends, give up (unlikely to happen) */
- return -errno;
- }
+ *hole = offs;
+ return 0;
}
+ /* in hole, end not yet known */
+ offs = lseek(s->fd, start, SEEK_DATA);
+ if (offs < 0) {
+ /* no idea where the hole ends, give up (unlikely to happen) */
+ return -errno;
+ }
+ assert(offs > start);
+ *hole = start;
+ *data = offs;
return 0;
#else
return -ENOTSUP;
@@ -1543,25 +1558,22 @@ static int64_t coroutine_fn
raw_co_get_block_status(BlockDriverState *bs,
nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
}
- ret = try_seek_hole(bs, start, &data, &hole);
- if (ret < 0) {
- /* Assume everything is allocated. */
- data = 0;
- hole = start + nb_sectors * BDRV_SECTOR_SIZE;
- ret = 0;
- }
-
- assert(ret >= 0);
-
- if (data <= start) {
+ ret = BDRV_BLOCK_OFFSET_VALID | start;
+ if (find_allocation(bs, start, &data, &hole) < 0) {
+ /* No info available, so pretend there are no holes */
+ *pnum = nb_sectors;
+ ret |= BDRV_BLOCK_DATA;
+ } else if (data == start) {
/* On a data extent, compute sectors to the end of the extent. */
*pnum = MIN(nb_sectors, (hole - start) / BDRV_SECTOR_SIZE);
- return ret | BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | start;
+ ret |= BDRV_BLOCK_DATA;
} else {
/* On a hole, compute sectors to the beginning of the next extent. */
+ assert(hole == start);
*pnum = MIN(nb_sectors, (data - start) / BDRV_SECTOR_SIZE);
- return ret | BDRV_BLOCK_ZERO | BDRV_BLOCK_OFFSET_VALID | start;
+ ret |= BDRV_BLOCK_ZERO;
}
+ return ret;
}
static coroutine_fn BlockAIOCB *raw_aio_discard(BlockDriverState *bs,
--
1.9.3
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, (continued)
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Kevin Wolf, 2014/11/13
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Eric Blake, 2014/11/13
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Eric Blake, 2014/11/13
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Max Reitz, 2014/11/13
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Eric Blake, 2014/11/13
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Eric Blake, 2014/11/13
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Eric Blake, 2014/11/13
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Eric Blake, 2014/11/13
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Markus Armbruster, 2014/11/14
- Re: [Qemu-devel] [PATCH v2 3/4] raw-posix: Fix try_seek_hole()'s handling of SEEK_DATA failure, Eric Blake, 2014/11/14
[Qemu-devel] [PATCH v2 4/4] raw-posix: Clean up around raw_co_get_block_status(),
Markus Armbruster <=
[Qemu-devel] [PATCH v2 1/4] raw-posix: Fix comment for raw_co_get_block_status(), Markus Armbruster, 2014/11/13
Re: [Qemu-devel] [PATCH v2 0/4] raw-posix: Get rid of FIEMAP, and more, Eric Blake, 2014/11/13