Re: [Qemu-devel] [PATCH 2/5] pc: define PC_PCI_CONFIG_ADDR and PC_PCI_CONFIG_DATA

[Hu Tao]

On Tue, Nov 04, 2014 at 03:44:35PM +0200, Marcel Apfelbaum wrote:
> On Tue, 2014-11-04 at 17:12 +0800, Hu Tao wrote:
> > PC_PCI_CONFIG_ADDR and PC_PCI_CONFIG_DATA are defined in PCI
> > specification, so move them to common place.
> > 
> > Signed-off-by: Hu Tao <address@hidden>
> > ---
> >  hw/pci-host/piix.c        |  8 ++++----
> >  hw/pci-host/q35.c         |  8 ++++----
> >  include/hw/pci-host/q35.h |  3 ---
> >  include/hw/pci/pci.h      |  5 +++++
> >  tests/libqos/pci-pc.c     | 24 ++++++++++++------------
> >  5 files changed, 25 insertions(+), 23 deletions(-)
> > 
> > diff --git a/hw/pci-host/piix.c b/hw/pci-host/piix.c
> > index 1530038..eb92bde 100644
> > --- a/hw/pci-host/piix.c
> > +++ b/hw/pci-host/piix.c
> > @@ -288,11 +288,11 @@ static void i440fx_pcihost_realize(DeviceState *dev, 
> > Error **errp)
> >      PCIHostState *s = PCI_HOST_BRIDGE(dev);
> >      SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> >  
> > -    sysbus_add_io(sbd, 0xcf8, &s->conf_mem);
> > -    sysbus_init_ioports(sbd, 0xcf8, 4);
> > +    sysbus_add_io(sbd, PC_PCI_CONFIG_ADDR, &s->conf_mem);
> > +    sysbus_init_ioports(sbd, PC_PCI_CONFIG_ADDR, 4);
> >  
> > -    sysbus_add_io(sbd, 0xcfc, &s->data_mem);
> > -    sysbus_init_ioports(sbd, 0xcfc, 4);
> > +    sysbus_add_io(sbd, PC_PCI_CONFIG_DATA, &s->data_mem);
> > +    sysbus_init_ioports(sbd, PC_PCI_CONFIG_DATA, 4);
> >  }
> >  
> >  static int i440fx_initfn(PCIDevice *dev)
> > diff --git a/hw/pci-host/q35.c b/hw/pci-host/q35.c
> > index b20bad8..9e66835 100644
> > --- a/hw/pci-host/q35.c
> > +++ b/hw/pci-host/q35.c
> > @@ -41,11 +41,11 @@ static void q35_host_realize(DeviceState *dev, Error 
> > **errp)
> >      Q35PCIHost *s = Q35_HOST_DEVICE(dev);
> >      SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> >  
> > -    sysbus_add_io(sbd, MCH_HOST_BRIDGE_CONFIG_ADDR, &pci->conf_mem);
> > -    sysbus_init_ioports(sbd, MCH_HOST_BRIDGE_CONFIG_ADDR, 4);
> > +    sysbus_add_io(sbd, PC_PCI_CONFIG_ADDR, &pci->conf_mem);
> > +    sysbus_init_ioports(sbd, PC_PCI_CONFIG_ADDR, 4);
> >  
> > -    sysbus_add_io(sbd, MCH_HOST_BRIDGE_CONFIG_DATA, &pci->data_mem);
> > -    sysbus_init_ioports(sbd, MCH_HOST_BRIDGE_CONFIG_DATA, 4);
> > +    sysbus_add_io(sbd, PC_PCI_CONFIG_DATA, &pci->data_mem);
> > +    sysbus_init_ioports(sbd, PC_PCI_CONFIG_DATA, 4);
> >  
> >      pci->bus = pci_bus_new(DEVICE(s), "pcie.0",
> >                             s->mch.pci_address_space, 
> > s->mch.address_space_io,
> > diff --git a/include/hw/pci-host/q35.h b/include/hw/pci-host/q35.h
> > index 025d6e6..3a026b0 100644
> > --- a/include/hw/pci-host/q35.h
> > +++ b/include/hw/pci-host/q35.h
> > @@ -82,9 +82,6 @@ typedef struct Q35PCIHost {
> >  /* PCI configuration */
> >  #define MCH_HOST_BRIDGE                        "MCH"
> >  
> > -#define MCH_HOST_BRIDGE_CONFIG_ADDR            0xcf8
> > -#define MCH_HOST_BRIDGE_CONFIG_DATA            0xcfc
> > -
> >  /* D0:F0 configuration space */
> >  #define MCH_HOST_BRIDGE_REVISION_DEFAULT       0x0
> >  
> > diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> > index 3d42d7f..e42589a 100644
> > --- a/include/hw/pci/pci.h
> > +++ b/include/hw/pci/pci.h
> > @@ -13,6 +13,11 @@
> >  
> >  #include "hw/pci/pcie.h"
> >  
> > +/* PCI configuration */
> > +
> > +#define PC_PCI_CONFIG_ADDR      0xcf8
> > +#define PC_PCI_CONFIG_DATA      0xcfc
> I would move the macros also to hw/pci/pci_host.h,
> and only personal opinion, change them to
> PCI_HOST_BRIDGE_...

Done.

Regards,
Hu