qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [RFC 10/10] AHCI: Fix SDB FIS Construction


From: John Snow
Subject: [Qemu-devel] [RFC 10/10] AHCI: Fix SDB FIS Construction
Date: Sat, 13 Sep 2014 00:34:15 -0400

The SDB FIS creation was mangled;
We were writing the error byte to byte 0,
and omitting the SDB FIS magic byte.

Though the SDB packet layout states that:
byte 0: Must be 0xA1 to indicate SDB FIS.
byte 1: Port multiplier select & other flags
byte 2: status byte.
byte 3: error byte.

This patch adds an SDB FIS structure with
human-readable names, and ensures that we
are filling the structure appropriately.

Signed-off-by: John Snow <address@hidden>
---
 hw/ide/ahci.c | 23 ++++++++++++-----------
 hw/ide/ahci.h |  8 ++++++++
 2 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 5bc5a92..c2662fa 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -567,26 +567,27 @@ static void debug_print_fis(uint8_t *fis, int cmd_len)
 
 static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished)
 {
-    AHCIPortRegs *pr = &s->dev[port].port_regs;
+    AHCIDevice *ad = &s->dev[port];
+    AHCIPortRegs *pr = &ad->port_regs;
     IDEState *ide_state;
-    uint8_t *sdb_fis;
+    SDBFIS *sdb_fis;
 
     if (!s->dev[port].res_fis ||
         !(pr->cmd & PORT_CMD_FIS_RX)) {
         return;
     }
 
-    sdb_fis = &s->dev[port].res_fis[RES_FIS_SDBFIS];
-    ide_state = &s->dev[port].port.ifs[0];
-
-    /* clear memory */
-    *(uint32_t*)sdb_fis = 0;
+    sdb_fis = (SDBFIS *)&ad->res_fis[RES_FIS_SDBFIS];
+    ide_state = &ad->port.ifs[0];
 
-    /* write values */
-    sdb_fis[0] = ide_state->error;
-    sdb_fis[2] = ide_state->status & 0x77;
+    sdb_fis->type = 0xA1;
+    /* Interrupt pending & Notification bit */
+    sdb_fis->flags = (ad->hba->control_regs.irqstatus ? (1 << 6) : 0);
+    sdb_fis->status = ide_state->status & 0x77;
+    sdb_fis->error = ide_state->error;
+    /* update SAct field in SDB_FIS */
     s->dev[port].finished |= finished;
-    *(uint32_t*)(sdb_fis + 4) = cpu_to_le32(s->dev[port].finished);
+    sdb_fis->payload = cpu_to_le32(ad->finished);
 
     ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_SDB_FIS);
 }
diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h
index 8745848..a1c107e 100644
--- a/hw/ide/ahci.h
+++ b/hw/ide/ahci.h
@@ -348,6 +348,14 @@ typedef struct NCQFrame {
     uint8_t aux3;
 } QEMU_PACKED NCQFrame;
 
+typedef struct SDBFIS {
+    uint8_t type;
+    uint8_t flags;
+    uint8_t status;
+    uint8_t error;
+    uint32_t payload;
+} QEMU_PACKED SDBFIS;
+
 void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
 void ahci_uninit(AHCIState *s);
 
-- 
1.9.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]