[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RFC PATCH v3 47/49] replay: replay_break command
From: |
Pavel Dovgalyuk |
Subject: |
[Qemu-devel] [RFC PATCH v3 47/49] replay: replay_break command |
Date: |
Thu, 31 Jul 2014 16:57:54 +0400 |
User-agent: |
StGit/0.16 |
This patch adds support for replay_break monitor command. This command
sets the step (measured in executed instructions) where replay should be
stopped.
Signed-off-by: Pavel Dovgalyuk <address@hidden>
---
hmp-commands.hx | 14 ++++++++++++++
monitor.c | 20 ++++++++++++++++++++
qapi-schema.json | 19 ++++++++++++++++++-
qmp-commands.hx | 34 +++++++++++++++++++++++++++++++---
replay/replay-qmp.c | 14 ++++++++++++++
replay/replay.c | 29 ++++++++++++++++++++++++++++-
replay/replay.h | 4 ++++
7 files changed, 129 insertions(+), 5 deletions(-)
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 19174f1..3eaa80e 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1801,6 +1801,20 @@ STEXI
Shows information about replay process.
ETEXI
+ {
+ .name = "replay_break",
+ .args_type = "step:l",
+ .params = "step",
+ .help = "stop replaying at the specified replay step",
+ .mhandler.cmd = do_replay_break,
+ },
+
+STEXI
address@hidden replay_break @var{step}
+Stops replaying at the specified @var{step}.
+
+ETEXI
+
STEXI
@end table
ETEXI
diff --git a/monitor.c b/monitor.c
index 61fb11c..1ba9096 100644
--- a/monitor.c
+++ b/monitor.c
@@ -1184,8 +1184,12 @@ static void do_replay_info(Monitor *mon, const QDict
*qdict)
monitor_printf(mon, "Replay mode: %s ",
ReplayMode_lookup[replay_mode]);
if (replay_mode == REPLAY_MODE_PLAY) {
+ uint64_t bp = replay_get_break_step();
monitor_printf(mon, "(%s)",
ReplaySubmode_lookup[replay_get_play_submode()]);
+ if (bp != -1ULL) {
+ monitor_printf(mon, "\n\tbreakpoint step: %" PRId64 "\n", bp);
+ }
}
monitor_printf(mon, "\n\tcurrent step: %" PRId64 "\n",
replay_get_current_step());
@@ -1193,6 +1197,22 @@ static void do_replay_info(Monitor *mon, const QDict
*qdict)
}
}
+static void do_replay_break(Monitor *mon, const QDict *qdict)
+{
+ if (replay_mode == REPLAY_MODE_PLAY) {
+ uint64_t step = qdict_get_int(qdict, "step");
+ if (step >= replay_get_current_step()) {
+ monitor_printf(mon, "Setting break at step: %" PRId64 "\n", step);
+ replay_set_break(step);
+ } else {
+ monitor_printf(mon, "Cannot stop on the preceding step.\n");
+ }
+ } else {
+ monitor_printf(mon, "You can stop at the specific step "
+ "only in PLAY mode.\n");
+ }
+}
+
static void monitor_printc(Monitor *mon, int c)
{
monitor_printf(mon, "'");
diff --git a/qapi-schema.json b/qapi-schema.json
index 93a7ff7..e56e399 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -3535,10 +3535,13 @@
#
# @step: current step of record or play
#
+# @break-step: step where execution should stop
+#
# Since: 2.2
##
{ 'type': 'ReplayInfo',
- 'data': {'mode': 'ReplayMode', 'submode': 'ReplaySubmode', 'step': 'uint64'}
}
+ 'data': { 'mode': 'ReplayMode', 'submode': 'ReplaySubmode',
+ 'step': 'uint64', 'break-step': 'uint64' } }
##
# @replay-info
@@ -3550,3 +3553,17 @@
# Since: 2.2
##
{ 'command': 'replay-info', 'returns': 'ReplayInfo' }
+
+##
+# @replay-break
+#
+# Sets breakpoint at the specified step of replaying.
+# This command can be used in replay to stop execution when
+# the specified step is reached.
+# Current step of the execution can be queried with replay-info command.
+#
+# @step: step where breakpoint should be set
+#
+# Since: 2.2
+##
+{ 'command': 'replay-break', 'data': { 'step': 'uint64' } }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 67dd886..712cb5b 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -3768,12 +3768,40 @@ replay-info
Shows information about replay process. This information includes
current execution step (number of executed processor instructions),
-replay mode (record, play or none), and replay submode (reverse or
-normal execution in play mode).
+replay mode (record, play or none), replay submode (reverse or
+normal execution in play mode), and breakpoint step.
Example:
-> { "execute": "replay-info" }
-<- { "return": { "step": 651488674, "mode": "record", "submode": "unknown" } }
+<- { "return": { "step": 651488674,
+ "mode": "record", "submode": "unknown"
+ "break-step": 651490000 } }
+
+EQMP
+
+ {
+ .name = "replay-break",
+ .args_type = "step:l",
+ .mhandler.cmd_new = qmp_marshal_input_replay_break,
+ },
+
+SQMP
+replay-break
+------------
+
+Sets breakpoint at the specified step of replaying.
+This command can be used in replay to stop execution when
+the specified step is reached.
+Current step of the execution can be queried with replay-info command.
+
+Arguments:
+
+- "step": step where breakpoint should be set
+
+Example:
+
+-> { "execute": "replay-break", "arguments": { "step": 1024 } }
+<- { "return": {} }
EQMP
diff --git a/replay/replay-qmp.c b/replay/replay-qmp.c
index 4a0017d..f48b816 100755
--- a/replay/replay-qmp.c
+++ b/replay/replay-qmp.c
@@ -24,6 +24,20 @@ ReplayInfo *qmp_replay_info(Error **errp)
info->mode = replay_mode;
info->submode = replay_get_play_submode();
info->step = replay_get_current_step();
+ info->break_step = replay_get_break_step();
return info;
}
+
+void qmp_replay_break(uint64_t step, Error **errp)
+{
+ if (replay_mode == REPLAY_MODE_PLAY) {
+ if (step >= replay_get_current_step()) {
+ replay_set_break(step);
+ } else {
+ error_setg(errp, "Cannot stop on the preceding step");
+ }
+ } else {
+ error_setg(errp, "replay_break can be used only in PLAY mode");
+ }
+}
diff --git a/replay/replay.c b/replay/replay.c
index 4151330..fac5ecd 100755
--- a/replay/replay.c
+++ b/replay/replay.c
@@ -31,6 +31,8 @@ static char *replay_filename;
char *replay_image_suffix;
ReplayState replay_state;
+/*! Step for stopping execution at. */
+static uint64_t replay_break_step = -1;
/*
Auto-saving for VM states data
@@ -285,6 +287,19 @@ void replay_instruction(int process_events)
} else if (replay_mode == REPLAY_MODE_PLAY) {
skip_async_events_until(EVENT_INSTRUCTION);
if (first_cpu->instructions_count >= 1) {
+ if (replay_get_current_step() == replay_break_step) {
+ replay_break_step = -1;
+
+ /* for stopping VM */
+ if (play_submode == REPLAY_SUBMODE_NORMAL) {
+ first_cpu->exception_index = EXCP_DEBUG;
+ monitor_printf(default_mon, "Execution has
stopped.\n");
+ vm_stop(EXCP_DEBUG);
+ }
+ /* for breaking execution loop */
+ cpu_exit(first_cpu);
+ return;
+ }
++replay_state.current_step;
--first_cpu->instructions_count;
if (first_cpu->instructions_count == 0) {
@@ -313,7 +328,8 @@ bool replay_has_async_request(void)
}
if (replay_mode == REPLAY_MODE_PLAY) {
- if (skip_async_events(EVENT_ASYNC)) {
+ if (skip_async_events(EVENT_ASYNC)
+ || replay_get_current_step() == replay_break_step) {
return true;
}
@@ -471,6 +487,7 @@ static void replay_enable(const char *fname, int mode)
replay_state.skipping_instruction = 0;
replay_state.current_step = 0;
current_saved_state = 0;
+ replay_break_step = -1;
replay_net_init();
@@ -643,3 +660,13 @@ void replay_data_buffer(unsigned char *data, size_t size)
replay_put_array(data, size);
}
}
+
+void replay_set_break(uint64_t step)
+{
+ replay_break_step = step;
+}
+
+uint64_t replay_get_break_step(void)
+{
+ return replay_break_step;
+}
diff --git a/replay/replay.h b/replay/replay.h
index 590f9e6..e737eba 100755
--- a/replay/replay.h
+++ b/replay/replay.h
@@ -53,6 +53,10 @@ void replay_configure(struct QemuOpts *opts, int mode);
void replay_init_timer(void);
/*! Closes replay log file and frees other resources. */
void replay_finish(void);
+/*! Sets step where execution should be stopped. */
+void replay_set_break(uint64_t step);
+/*! Retrieves current breakpoint step. */
+uint64_t replay_get_break_step(void);
/* Processing the instructions */
- [Qemu-devel] [RFC PATCH v3 37/49] replay: initialization and deinitialization, (continued)
- [Qemu-devel] [RFC PATCH v3 37/49] replay: initialization and deinitialization, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 38/49] replay: command line options, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 39/49] replay: snapshotting the virtual machine, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 40/49] replay: recording of the user input, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 41/49] tap-win32: destroy the thread at exit, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 42/49] replay: network packets record/replay, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 43/49] replay: audio data record/replay, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 44/49] replay: serial port, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 45/49] replay: USB passthrough, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 46/49] replay: replay_info command, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 47/49] replay: replay_break command,
Pavel Dovgalyuk <=
- [Qemu-devel] [RFC PATCH v3 48/49] replay: replay_seek_step command, Pavel Dovgalyuk, 2014/07/31
- [Qemu-devel] [RFC PATCH v3 49/49] gdbstub: reverse debugging, Pavel Dovgalyuk, 2014/07/31