[Qemu-devel] [PATCH] hw/arm/virt: fix pl031 addr typo

[Andrew Jones]

pl031's base address should be 0x9001000, 0x90010000. While in there
also add some spacing and zeros to make it easier to read the map.

Signed-off-by: Andrew Jones <address@hidden>
---
 hw/arm/virt.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 405c61d39c1e9..f817820972475 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -98,17 +98,17 @@ typedef struct VirtBoardInfo {
  */
 static const MemMapEntry a15memmap[] = {
     /* Space up to 0x8000000 is reserved for a boot ROM */
-    [VIRT_FLASH] = { 0, 0x8000000 },
-    [VIRT_CPUPERIPHS] = { 0x8000000, 0x20000 },
+    [VIRT_FLASH] =      {          0, 0x08000000 },
+    [VIRT_CPUPERIPHS] = { 0x08000000, 0x00020000 },
     /* GIC distributor and CPU interfaces sit inside the CPU peripheral space 
*/
-    [VIRT_GIC_DIST] = { 0x8000000, 0x10000 },
-    [VIRT_GIC_CPU] = { 0x8010000, 0x10000 },
-    [VIRT_UART] = { 0x9000000, 0x1000 },
-    [VIRT_RTC] = { 0x90010000, 0x1000 },
-    [VIRT_MMIO] = { 0xa000000, 0x200 },
+    [VIRT_GIC_DIST] =   { 0x08000000, 0x00010000 },
+    [VIRT_GIC_CPU] =    { 0x08010000, 0x00010000 },
+    [VIRT_UART] =       { 0x09000000, 0x00001000 },
+    [VIRT_RTC] =        { 0x09001000, 0x00001000 },
+    [VIRT_MMIO] =       { 0x0a000000, 0x00000200 },
     /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */
     /* 0x10000000 .. 0x40000000 reserved for PCI */
-    [VIRT_MEM] = { 0x40000000, 30ULL * 1024 * 1024 * 1024 },
+    [VIRT_MEM] =        { 0x40000000, 30ULL * 1024 * 1024 * 1024 },
 };
 
 static const int a15irqmap[] = {
-- 
1.9.3