[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 14/28] ahci: remove duplicate PORT_IRQ_* constants
From: |
John Snow |
Subject: |
[Qemu-devel] [PATCH 14/28] ahci: remove duplicate PORT_IRQ_* constants |
Date: |
Mon, 7 Jul 2014 14:17:55 -0400 |
From: Paolo Bonzini <address@hidden>
These are defined twice, just use one set consistently.
Signed-off-by: Paolo Bonzini <address@hidden>
Signed-off-by: John Snow <address@hidden>
---
hw/ide/ahci.c | 6 +++---
hw/ide/ahci.h | 21 ---------------------
2 files changed, 3 insertions(+), 24 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 0ec5627..e1f27bd 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -584,7 +584,7 @@ static void ahci_write_fis_sdb(AHCIState *s, int port,
uint32_t finished)
s->dev[port].finished |= finished;
*(uint32_t*)(sdb_fis + 4) = cpu_to_le32(s->dev[port].finished);
- ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_STAT_SDBS);
+ ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_SDB_FIS);
}
static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
@@ -629,7 +629,7 @@ static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t
*cmd_fis)
}
if (d2h_fis[2] & ERR_STAT) {
- ahci_trigger_irq(ad->hba, ad, PORT_IRQ_STAT_TFES);
+ ahci_trigger_irq(ad->hba, ad, PORT_IRQ_TF_ERR);
}
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS);
@@ -1039,7 +1039,7 @@ out:
if (!(s->status & DRQ_STAT)) {
/* done with DMA */
- ahci_trigger_irq(ad->hba, ad, PORT_IRQ_STAT_DSS);
+ ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS);
}
}
diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h
index f418b30..1543df7 100644
--- a/hw/ide/ahci.h
+++ b/hw/ide/ahci.h
@@ -132,27 +132,6 @@
#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
-#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */
-#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */
-#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */
-#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */
-#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */
-#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */
-#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */
-#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence
- Status */
-#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */
-#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier
- Status */
-#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */
-#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error
- Status */
-#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */
-#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */
-#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */
-#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */
-#define PORT_IRQ_STAT_CPDS (1U << 31) /* Code Port Detect Status */
-
/* ap->flags bits */
#define AHCI_FLAG_NO_NCQ (1 << 24)
#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */
--
1.9.3
- [Qemu-devel] [PATCH 07/28] ide: simplify async_cmd_done callbacks, (continued)
- [Qemu-devel] [PATCH 07/28] ide: simplify async_cmd_done callbacks, John Snow, 2014/07/07
- [Qemu-devel] [PATCH 05/28] ide: simplify reset callbacks, John Snow, 2014/07/07
- [Qemu-devel] [PATCH 11/28] ide: fold add_status callback into set_inactive, John Snow, 2014/07/07
- [Qemu-devel] [PATCH 12/28] ide: move BM_STATUS bits to pci.[ch], John Snow, 2014/07/07
- [Qemu-devel] [PATCH 08/28] ide: simplify start_transfer callbacks, John Snow, 2014/07/07
- [Qemu-devel] [PATCH 14/28] ahci: remove duplicate PORT_IRQ_* constants,
John Snow <=
- [Qemu-devel] [PATCH 09/28] ide: wrap start_dma callback, John Snow, 2014/07/07
- [Qemu-devel] [PATCH 13/28] ide: move retry constants out of BM_STATUS_* namespace, John Snow, 2014/07/07
- [Qemu-devel] [PATCH 16/28] ide: make all commands go through cmd_done, John Snow, 2014/07/07
- [Qemu-devel] [PATCH 10/28] ide: remove wrong setting of BM_STATUS_INT, John Snow, 2014/07/07
- [Qemu-devel] [PATCH 15/28] ide: stop PIO transfer on errors, John Snow, 2014/07/07