[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v10 1/3] sPAPR: Implement EEH RTAS calls
From: |
Gavin Shan |
Subject: |
Re: [Qemu-devel] [PATCH v10 1/3] sPAPR: Implement EEH RTAS calls |
Date: |
Wed, 25 Jun 2014 09:38:29 +1000 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Tue, Jun 24, 2014 at 04:43:23PM +0200, Alexander Graf wrote:
>
>On 10.06.14 04:03, Gavin Shan wrote:
>>The emulation for EEH RTAS requests from guest isn't covered
>>by QEMU yet and the patch implements them.
>>
>>The patch defines constants used by EEH RTAS calls and adds
>>callback sPAPRPHBClass::eeh_handler, which is going to be used
>>this way:
>>
>>1. RTAS calls are received in spapr_pci.c, sanity check is done
>> there.
>>2. RTAS handlers handle what they can. If there is something it
>> cannot handle and sPAPRPHBClass::eeh_handler callback is defined,
>> it is called.
>>3. sPAPRPHBClass::eeh_handler is only implemented for VFIO now. It
>> does ioctl() to the IOMMU container fd to complete the call. Error
>> codes from that ioctl() are transferred back to the guest.
>>
>>Signed-off-by: Gavin Shan <address@hidden>
>>---
>> hw/ppc/spapr_pci.c | 248
>> ++++++++++++++++++++++++++++++++++++++++++++
>> include/hw/pci-host/spapr.h | 7 ++
>> include/hw/ppc/spapr.h | 33 ++++++
>> 3 files changed, 288 insertions(+)
>>
>>diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
>>index 131434b..bfea488 100644
>>--- a/hw/ppc/spapr_pci.c
>>+++ b/hw/ppc/spapr_pci.c
>>@@ -422,6 +422,241 @@ static void
>>rtas_ibm_query_interrupt_source_number(PowerPCCPU *cpu,
>> rtas_st(rets, 2, 1);/* 0 == level; 1 == edge */
>> }
>>+static int rtas_handle_eeh_request(sPAPRPHBState *sphb,
>>+ uint32_t req, uint32_t opt,
>>+ target_ulong rets)
>>+{
>>+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>+ int ret;
>>+
>>+ ret = info->eeh_handler(sphb, req, opt);
>>+ if (ret >= 0) {
>>+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>+ } else {
>>+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>+ }
>>+
>>+ return ret;
>
>I think you're better off failing the eeh_handler() call in here when
>the function is not implemented. That way all callers don't have to
>explicitly check for it.
>
Yep, it makes the logic of the function complete. I'll fix in v11.
>I also find it a lot less confusing if the return value doesn't get
>set inside this helper.
>
Yeah, I agree and will fix in v11.
>>+}
>>+
>>+static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
>>+ sPAPREnvironment *spapr,
>>+ uint32_t token, uint32_t nargs,
>>+ target_ulong args, uint32_t nret,
>>+ target_ulong rets)
>>+{
>>+ uint32_t addr, option;
>>+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>+
>>+ if (!sphb || !info->eeh_handler) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ if ((nargs != 4) || (nret != 1)) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ addr = rtas_ld(args, 0);
>>+ option = rtas_ld(args, 3);
>>+ switch (option) {
>>+ case RTAS_EEH_ENABLE:
>>+ if (!find_dev(spapr, buid, addr)) {
>>+ goto param_error_exit;
>>+ }
>>+ break;
>>+ case RTAS_EEH_DISABLE:
>>+ case RTAS_EEH_THAW_IO:
>>+ case RTAS_EEH_THAW_DMA:
>>+ break;
>>+ default:
>>+ goto param_error_exit;
>>+ }
>>+
>>+ rtas_handle_eeh_request(sphb, RTAS_EEH_REQ_SET_OPTION, option, rets);
>>+ return;
>>+
>>+param_error_exit:
>>+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>+}
>>+
>>+static void rtas_ibm_get_config_addr_info2(PowerPCCPU *cpu,
>>+ sPAPREnvironment *spapr,
>>+ uint32_t token, uint32_t nargs,
>>+ target_ulong args, uint32_t nret,
>>+ target_ulong rets)
>>+{
>>+ uint32_t addr, option;
>>+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>+ PCIDevice *pdev;
>>+
>>+ if (!sphb || !info->eeh_handler) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ if ((nargs != 4) || (nret != 2)) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ addr = rtas_ld(args, 0);
>>+ option = rtas_ld(args, 3);
>>+ if (option != RTAS_GET_PE_ADDR && option != RTAS_GET_PE_MODE) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ pdev = find_dev(spapr, buid, addr);
>>+ if (!pdev) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ /*
>>+ * For now, we always have bus level PE whose address
>>+ * has format "00BBSS00". The guest OS might regard
>>+ * PE address 0 as invalid. We avoid that simply by
>>+ * extending it with one.
>>+ */
>>+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>+ if (option == RTAS_GET_PE_ADDR) {
>>+ rtas_st(rets, 1, (pci_bus_num(pdev->bus) << 16) + 1);
>>+ } else {
>>+ rtas_st(rets, 1, RTAS_PE_MODE_SHARED);
>>+ }
>>+
>>+ return;
>>+
>>+param_error_exit:
>>+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>+}
>>+
>>+static void rtas_ibm_read_slot_reset_state2(PowerPCCPU *cpu,
>>+ sPAPREnvironment *spapr,
>>+ uint32_t token, uint32_t nargs,
>>+ target_ulong args, uint32_t nret,
>>+ target_ulong rets)
>>+{
>>+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>+ int32_t ret;
>>+
>>+ if (!sphb || !info->eeh_handler) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ if ((nargs != 3) || (nret != 4 && nret != 5)) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ ret = rtas_handle_eeh_request(sphb, RTAS_EEH_REQ_GET_STATE, 0, rets);
>>+ if (ret >= 0) {
>>+ rtas_st(rets, 1, ret);
>>+ rtas_st(rets, 2, RTAS_EEH_SUPPORT);
>>+ rtas_st(rets, 3, RTAS_EEH_PE_UNAVAIL_INFO);
>>+ if (nret >= 5) {
>>+ rtas_st(rets, 4, RTAS_EEH_PE_RECOVER_INFO);
>>+ }
>>+ }
>
>It's really awkward to not see an rtas_st(0) here.
>
Yeah. As you mentioned above, "rtas_st(0)" would make the function
complete (from view of logic). Thanks and I'll fix in v11.
>>+
>>+ return;
>>+
>>+param_error_exit:
>>+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>+}
>>+
>>+static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
>>+ sPAPREnvironment *spapr,
>>+ uint32_t token, uint32_t nargs,
>>+ target_ulong args, uint32_t nret,
>>+ target_ulong rets)
>>+{
>>+ uint32_t option;
>>+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>+
>>+ if (!sphb || !info->eeh_handler) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ if ((nargs != 4) || (nret != 1)) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ option = rtas_ld(args, 3);
>>+ if (option != RTAS_SLOT_RESET_DEACTIVATE &&
>>+ option != RTAS_SLOT_RESET_HOT &&
>>+ option != RTAS_SLOT_RESET_FUNDAMENTAL) {
>>+ goto param_error_exit;
>>+ }
>
>Please make this a switch().
>
Sure, but may I ask "switch()" could improve the code readability
or save a bit .text space, or it's easy to be extended in future? :-)
>>+
>>+ rtas_handle_eeh_request(sphb, RTAS_EEH_REQ_RESET, option, rets);
>>+ return;
>>+
>>+param_error_exit:
>>+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>+}
>>+
>>+static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
>>+ sPAPREnvironment *spapr,
>>+ uint32_t token, uint32_t nargs,
>>+ target_ulong args, uint32_t nret,
>>+ target_ulong rets)
>>+{
>>+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>+
>>+ if (!sphb || !info->eeh_handler) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ if ((nargs != 3) || (nret != 1)) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ rtas_handle_eeh_request(sphb, RTAS_EEH_REQ_CONFIGURE, 0, rets);
>>+ return;
>>+
>>+param_error_exit:
>>+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>+}
>>+
>>+/* To support it later */
>>+static void rtas_ibm_slot_error_detail(PowerPCCPU *cpu,
>>+ sPAPREnvironment *spapr,
>>+ uint32_t token, uint32_t nargs,
>>+ target_ulong args, uint32_t nret,
>>+ target_ulong rets)
>>+{
>>+ int option;
>>+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
>>+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
>>+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
>>+
>>+ if (!sphb || !info->eeh_handler) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ if ((nargs != 8) || (nret != 1)) {
>>+ goto param_error_exit;
>>+ }
>>+
>>+ option = rtas_ld(args, 7);
>>+ if (option != RTAS_SLOT_TEMP_ERR_LOG &&
>>+ option != RTAS_SLOT_PERM_ERR_LOG) {
>>+ goto param_error_exit;
>>+ }
>
>switch() again.
>
Ok, but same question as above.
Thanks,
Gavin
>
>Alex
>
>>+
>>+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
>>+ return;
>>+
>>+param_error_exit:
>>+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
>>+}
>>+
>> static int pci_spapr_swizzle(int slot, int pin)
>> {
>> return (slot + pin) % PCI_NUM_PINS;
>>@@ -939,6 +1174,19 @@ void spapr_pci_rtas_init(void)
>> rtas_ibm_query_interrupt_source_number);
>> spapr_rtas_register("ibm,change-msi", rtas_ibm_change_msi);
>> }
>>+
>>+ spapr_rtas_register("ibm,set-eeh-option",
>>+ rtas_ibm_set_eeh_option);
>>+ spapr_rtas_register("ibm,get-config-addr-info2",
>>+ rtas_ibm_get_config_addr_info2);
>>+ spapr_rtas_register("ibm,read-slot-reset-state2",
>>+ rtas_ibm_read_slot_reset_state2);
>>+ spapr_rtas_register("ibm,set-slot-reset",
>>+ rtas_ibm_set_slot_reset);
>>+ spapr_rtas_register("ibm,configure-pe",
>>+ rtas_ibm_configure_pe);
>>+ spapr_rtas_register("ibm,slot-error-detail",
>>+ rtas_ibm_slot_error_detail);
>> }
>> static void spapr_pci_register_types(void)
>>diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
>>index caeecfa..f487f23 100644
>>--- a/include/hw/pci-host/spapr.h
>>+++ b/include/hw/pci-host/spapr.h
>>@@ -51,6 +51,7 @@ struct sPAPRPHBClass {
>> PCIHostBridgeClass parent_class;
>> void (*finish_realize)(sPAPRPHBState *sphb, Error **errp);
>>+ int (*eeh_handler)(sPAPRPHBState *sphb, int req, int opt);
>> };
>> struct sPAPRPHBState {
>>@@ -104,6 +105,12 @@ struct sPAPRPHBVFIOState {
>> #define SPAPR_PCI_MEM_WIN_BUS_OFFSET 0x80000000ULL
>>+/* EEH related requests */
>>+#define RTAS_EEH_REQ_SET_OPTION 0
>>+#define RTAS_EEH_REQ_GET_STATE 1
>>+#define RTAS_EEH_REQ_RESET 2
>>+#define RTAS_EEH_REQ_CONFIGURE 3
>>+
>> static inline qemu_irq spapr_phb_lsi_qirq(struct sPAPRPHBState *phb, int
>> pin)
>> {
>> return xics_get_qirq(spapr->icp, phb->lsi_table[pin].irq);
>>diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
>>index 6faae5d..ea84de2 100644
>>--- a/include/hw/ppc/spapr.h
>>+++ b/include/hw/ppc/spapr.h
>>@@ -354,6 +354,39 @@ static inline int spapr_allocate_lsi(int hint)
>> return spapr_allocate_irq(hint, true);
>> }
>>+/* ibm,set-eeh-option */
>>+#define RTAS_EEH_DISABLE 0
>>+#define RTAS_EEH_ENABLE 1
>>+#define RTAS_EEH_THAW_IO 2
>>+#define RTAS_EEH_THAW_DMA 3
>>+
>>+/* ibm,get-config-addr-info2 */
>>+#define RTAS_GET_PE_ADDR 0
>>+#define RTAS_GET_PE_MODE 1
>>+#define RTAS_PE_MODE_NONE 0
>>+#define RTAS_PE_MODE_NOT_SHARED 1
>>+#define RTAS_PE_MODE_SHARED 2
>>+
>>+/* ibm,read-slot-reset-state2 */
>>+#define RTAS_EEH_PE_STATE_NORMAL 0
>>+#define RTAS_EEH_PE_STATE_RESET 1
>>+#define RTAS_EEH_PE_STATE_STOPPED_IO_DMA 2
>>+#define RTAS_EEH_PE_STATE_STOPPED_DMA 4
>>+#define RTAS_EEH_PE_STATE_UNAVAIL 5
>>+#define RTAS_EEH_NOT_SUPPORT 0
>>+#define RTAS_EEH_SUPPORT 1
>>+#define RTAS_EEH_PE_UNAVAIL_INFO 1000
>>+#define RTAS_EEH_PE_RECOVER_INFO 0
>>+
>>+/* ibm,set-slot-reset */
>>+#define RTAS_SLOT_RESET_DEACTIVATE 0
>>+#define RTAS_SLOT_RESET_HOT 1
>>+#define RTAS_SLOT_RESET_FUNDAMENTAL 3
>>+
>>+/* ibm,slot-error-detail */
>>+#define RTAS_SLOT_TEMP_ERR_LOG 1
>>+#define RTAS_SLOT_PERM_ERR_LOG 2
>>+
>> /* RTAS return codes */
>> #define RTAS_OUT_SUCCESS 0
>> #define RTAS_OUT_NO_ERRORS_FOUND 1
>