[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1314667] Building a USB-Drive with EasyToBoot (E2B) an
From: |
Ohlerth Hans |
Subject: |
[Qemu-devel] [Bug 1314667] Building a USB-Drive with EasyToBoot (E2B) and PMPrebUSB |
Date: |
Mon, 05 May 2014 13:56:56 -0000 |
Hello Steve, I had a lot of trouble over the weekend building a
sufficiently working bootable "USB-Rescue-Drive". I summed it up in an
attached Word-Dokument and I am sure, you have the knowledge to solve
my problems. For your detailed help I will expect with lots of kind regards
H.Ohlerth
Am 01.05.2014 10:40, schrieb Steve Si:
> RMPrepUSB will run ON 32-bit and 64-bit Operating Systems.
> That is not the same thing as QEMU will run a 64-bit Operating System.
> There is a 64-bit version of QEMU but it is very buggy and won't even boot a
> 64-bit Vista/7 WinPE, so it is not included.
> As I said, normally when booting a 64-bit OS under QEMU, you will see a
> Windows message saying that the system is not a 64-bit system. For some
> reason you are not seeing this on your system.
>
** Attachment added: "email to Steve Si -USB-Boot-E2B-RMPrepUSB.doc"
https://bugs.launchpad.net/bugs/1314667/+attachment/4105689/+files/email%20to%20Steve%20Si%20-USB-Boot-E2B-RMPrepUSB.doc
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1314667
Title:
PMPrebUSB - appcrash of qemu in Win-7-64bit
Status in QEMU:
New
Bug description:
I am not sure if this issue is a bug of qemu or by Win-7.
I want to test in advance with QEMU the ability if my USB-Rescue-Drive is
booting correctly. I have Win-7-64 and run qemu v.o.15.1.0 out of the
installed RMPrepUSB v.2.1.719
program. The settings for the preparation of my USB drive were FAT32 boot as
HD, bootloader WinPE/Win-7/Vista, set for running iso-files directly in %_ISO
\MAINMENU\Hiren’sBootCD.iso. When I run Qemu I get the messages in the cmd
starting window it says:
Administrator: RMPrepUSB QEMU Launcher
**************************************
EXECUTING "C:\Program Files (x86)\RMPrepUSB\qemu\STARTFROMUSB.cmd"
DRIVE NUMBER=3
MEMORY SIZE=1000
HARD DISK IMAGE=harddisk.img
NOWRITE=
Found OS=VISTA_OR_LATER
Sending command Start_VM.exe 3 500 qemu.exe -L . -name "RMPrepUSB Emulation
Session RAM=1000MB VirtualHDD=harddisk.i
lt+LCtrl)" -boot c -m 1000 -drive file=\\.
\PhysicalDrive3,if=ide,index=0,media=disk -hdb harddisk.img to shell...
Win-7: in the second window appears:
***********************************
-->qemu funktioniert nicht mehr
Problemsignatur:
Problemereignisname: APPCRASH
Anwendungsname: qemu.exe
Anwendungsversion: 0.15.1.0
Anwendungszeitstempel: 4f478c16
Fehlermodulname: qemu.exe
Fehlermodulversion: 0.15.1.0
Fehlermodulzeitstempel: 4f478c16
Ausnahmecode: 40000015
Ausnahmeoffset: 00053b06
Betriebsystemversion: 6.1.7601.2.1.0.256.48
Gebietsschema-ID: 1031
Zusatzinformation 1: bf8d
Zusatzinformation 2: bf8d49108a2e5a0707fc48438e01652a
Zusatzinformation 3: b0f1
Zusatzinformation 4: b0f155b0f1de9c5eb22bd6d100737cbe
If somebody can understand that behaviour I appreciate everybodies help.
Thank you with regards
H.O.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1314667/+subscriptions