qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] 2.0 regression: loadvm assertion with ehci + tablet


From: Andreas Färber
Subject: Re: [Qemu-devel] 2.0 regression: loadvm assertion with ehci + tablet
Date: Mon, 31 Mar 2014 00:25:53 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.3.0

Hi,

Am 30.03.2014 22:27, schrieb Cole Robinson:
> With git master, loadvm hits an assert failure if using ehci and usb tablet.
> Steps to reproduce:
> 
> $ qemu-img create -f qcow2 foo.qcow2 10G
> $ ./x86_64-softmmu/qemu-system-x86_64 \
>   -enable-kvm -m 4096 \
>   -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x5.0x7 \
>   -device
> ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x5
>  \
>   -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x5.0x1 \
>   -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x5.0x2 \
>   -device usb-tablet,id=input0 \
>   -hda foo.qcow2 \
>   -cdrom Fedora-20-x86_64-Live-Desktop.iso \
>   -boot d -monitor stdio
> 
> <wait until guest boot to 'welcome to fedora' window>
> (qemu) savevm foo
> (qemu) loadvm foo
> qemu-system-x86_64: hw/pci/pci.c:250: pcibus_reset: Assertion
> `bus->irq_count[i] == 0' failed.
> 
> The relevant backtrace bits for the assertion:
> 
> #4  0x00007f8f7241971e in pcibus_reset (qbus=0x7f8f74082fd0)
>     at hw/pci/pci.c:250
> #5  0x00007f8f723bd36d in qbus_reset_one (bus=0x7f8f74082fd0,
>     opaque=<optimized out>) at hw/core/qdev.c:249
> #6  0x00007f8f723bec88 in qdev_walk_children (dev=0x7f8f73efb320,
>     pre_devfn=0x0, pre_busfn=0x0, post_devfn=0x7f8f723bf4f0 <qdev_reset_one>,
>     post_busfn=0x7f8f723bd320 <qbus_reset_one>, opaque=0x0)
>     at hw/core/qdev.c:403
> #7  0x00007f8f723bedb8 in qbus_walk_children (bus=0x7f8f740706e0,
>     pre_devfn=0x0, pre_busfn=0x0, post_devfn=0x7f8f723bf4f0 <qdev_reset_one>,
>     post_busfn=0x7f8f723bd320 <qbus_reset_one>, opaque=0x0)
>     at hw/core/qdev.c:369
> #8  0x00007f8f724f5c5d in qemu_devices_reset () at vl.c:1867
> #9  qemu_system_reset (address@hidden) at vl.c:1880
> #10 0x00007f8f7256dba2 in load_vmstate (address@hidden "foo")
>     at /home/crobinso/src/qemu/savevm.c:1098
> 
> The 'cause' is this:
> 
> #0  ehci_detach (port=0x555556436968) at hw/usb/hcd-ehci.c:810
> #1  0x0000555555727b5e in usb_detach (address@hidden)
>     at hw/usb/core.c:49
> #2  0x0000555555736bf3 in ehci_reset (opaque=0x5555564364d8)
>     at hw/usb/hcd-ehci.c:941
> #3  0x00005555557e1fcd in qemu_devices_reset () at vl.c:1867
> #4  qemu_system_reset (address@hidden) at vl.c:1880
> #5  0x0000555555859f12 in load_vmstate (address@hidden "foo")
>     at /home/crobinso/src/qemu/savevm.c:1098
> 
> ehci_reset calls usb_detach which sets pcibus->irq_count[3] = 1. pcibus_reset
> runs and hits the assertion. But I don't understand this stuff enough to
> determine what's actually wrong here :)
> 
> I bisected the issue to:
> 
> commit 31b030d4abc5bea89c2b33b39d3b302836f6b6ee
> Author: Andreas Färber <address@hidden>
> Date:   Wed Sep 4 01:29:02 2013 +0200
> 
>     cputlb: Change tlb_flush_page() argument to CPUState
> 
>     Signed-off-by: Andreas Färber <address@hidden>
> 
> ...and then I double checked it since that sounds unrelated. Same result.

You are running into an unrelated migration bug:
http://git.qemu.org/?p=qemu.git;a=commit;h=c01a71c1a56fa27f43449ff59e5d03b2483658a2

Sorry about that. You'll need to patch -p1 the above commit on top of
each git-bisect commit to find the actual breakage if the above commit
is already bad (can't test right now).

Cheers,
Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg



reply via email to

[Prev in Thread] Current Thread [Next in Thread]