[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 1/2] usb-hid: Add high speed mouse configurat
From: |
Ján Veselý |
Subject: |
Re: [Qemu-devel] [PATCH v2 1/2] usb-hid: Add high speed mouse configuration |
Date: |
Mon, 17 Mar 2014 13:53:14 -0400 |
ping
any problem with v2?
regards,
Jan
On Sun, Feb 23, 2014 at 2:37 AM, Jan Vesely <address@hidden> wrote:
> v2: add usb_mouse_properties
> use macros for bmAttributes
>
> Signed-off-by: Jan Vesely <address@hidden>
> ---
> hw/usb/dev-hid.c | 73
> +++++++++++++++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 65 insertions(+), 8 deletions(-)
>
> diff --git a/hw/usb/dev-hid.c b/hw/usb/dev-hid.c
> index f36e617..70c2c5f 100644
> --- a/hw/usb/dev-hid.c
> +++ b/hw/usb/dev-hid.c
> @@ -55,9 +55,10 @@ enum {
> STR_PRODUCT_TABLET,
> STR_PRODUCT_KEYBOARD,
> STR_SERIALNUMBER,
> - STR_CONFIG_MOUSE,
> STR_CONFIG_TABLET,
> STR_CONFIG_KEYBOARD,
> + STR_CONFIG_MOUSE_FULL,
> + STR_CONFIG_MOUSE_HIGH,
> };
>
> static const USBDescStrings desc_strings = {
> @@ -66,12 +67,13 @@ static const USBDescStrings desc_strings = {
> [STR_PRODUCT_TABLET] = "QEMU USB Tablet",
> [STR_PRODUCT_KEYBOARD] = "QEMU USB Keyboard",
> [STR_SERIALNUMBER] = "42", /* == remote wakeup works */
> - [STR_CONFIG_MOUSE] = "HID Mouse",
> [STR_CONFIG_TABLET] = "HID Tablet",
> [STR_CONFIG_KEYBOARD] = "HID Keyboard",
> + [STR_CONFIG_MOUSE_FULL]= "HID Mouse Full speed configuration (usb 1.1)",
> + [STR_CONFIG_MOUSE_HIGH]= "HID Mouse High speed configuration (usb 2.0)",
> };
>
> -static const USBDescIface desc_iface_mouse = {
> +static const USBDescIface desc_iface_mouse_full = {
> .bInterfaceNumber = 0,
> .bNumEndpoints = 1,
> .bInterfaceClass = USB_CLASS_HID,
> @@ -102,6 +104,37 @@ static const USBDescIface desc_iface_mouse = {
> },
> };
>
> +static const USBDescIface desc_iface_mouse_high = {
> + .bInterfaceNumber = 0,
> + .bNumEndpoints = 1,
> + .bInterfaceClass = USB_CLASS_HID,
> + .bInterfaceSubClass = 0x01, /* boot */
> + .bInterfaceProtocol = 0x02,
> + .ndesc = 1,
> + .descs = (USBDescOther[]) {
> + {
> + /* HID descriptor */
> + .data = (uint8_t[]) {
> + 0x09, /* u8 bLength */
> + USB_DT_HID, /* u8 bDescriptorType */
> + 0x01, 0x00, /* u16 HID_class */
> + 0x00, /* u8 country_code */
> + 0x01, /* u8 num_descriptors */
> + USB_DT_REPORT, /* u8 type: Report */
> + 52, 0, /* u16 len */
> + },
> + },
> + },
> + .eps = (USBDescEndpoint[]) {
> + {
> + .bEndpointAddress = USB_DIR_IN | 0x01,
> + .bmAttributes = USB_ENDPOINT_XFER_INT,
> + .wMaxPacketSize = 4,
> + .bInterval = 0x06,
> + },
> + },
> +};
> +
> static const USBDescIface desc_iface_tablet = {
> .bInterfaceNumber = 0,
> .bNumEndpoints = 1,
> @@ -193,19 +226,36 @@ static const USBDescIface desc_iface_keyboard = {
> },
> };
>
> -static const USBDescDevice desc_device_mouse = {
> - .bcdUSB = 0x0100,
> +static const USBDescDevice desc_device_mouse_full = {
> + .bcdUSB = 0x0200,
> + .bMaxPacketSize0 = 8,
> + .bNumConfigurations = 1,
> + .confs = (USBDescConfig[]) {
> + {
> + .bNumInterfaces = 1,
> + .bConfigurationValue = 1,
> + .iConfiguration = STR_CONFIG_MOUSE_FULL,
> + .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_WAKEUP,
> + .bMaxPower = 50,
> + .nif = 1,
> + .ifs = &desc_iface_mouse_full,
> + },
> + },
> +};
> +
> +static const USBDescDevice desc_device_mouse_high = {
> + .bcdUSB = 0x0200,
> .bMaxPacketSize0 = 8,
> .bNumConfigurations = 1,
> .confs = (USBDescConfig[]) {
> {
> .bNumInterfaces = 1,
> .bConfigurationValue = 1,
> - .iConfiguration = STR_CONFIG_MOUSE,
> + .iConfiguration = STR_CONFIG_MOUSE_HIGH,
> .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_WAKEUP,
> .bMaxPower = 50,
> .nif = 1,
> - .ifs = &desc_iface_mouse,
> + .ifs = &desc_iface_mouse_high,
> },
> },
> };
> @@ -274,7 +324,8 @@ static const USBDesc desc_mouse = {
> .iProduct = STR_PRODUCT_MOUSE,
> .iSerialNumber = STR_SERIALNUMBER,
> },
> - .full = &desc_device_mouse,
> + .full = &desc_device_mouse_full,
> + .high = &desc_device_mouse_high,
> .str = desc_strings,
> .msos = &desc_msos_suspend,
> };
> @@ -676,6 +727,11 @@ static const TypeInfo usb_tablet_info = {
> .class_init = usb_tablet_class_initfn,
> };
>
> +static Property usb_mouse_properties[] = {
> + DEFINE_PROP_UINT32("usb_version", USBHIDState, usb_version, 2),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> static void usb_mouse_class_initfn(ObjectClass *klass, void *data)
> {
> DeviceClass *dc = DEVICE_CLASS(klass);
> @@ -686,6 +742,7 @@ static void usb_mouse_class_initfn(ObjectClass *klass,
> void *data)
> uc->product_desc = "QEMU USB Mouse";
> uc->usb_desc = &desc_mouse;
> dc->vmsd = &vmstate_usb_ptr;
> + dc->props = usb_mouse_properties;
> set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
> }
>
> --
> 1.9.0
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v2 1/2] usb-hid: Add high speed mouse configuration,
Ján Veselý <=