[Qemu-devel] [Bug 1284874] Re: Guest hangs during option rom loading with certain cards

[Bandan Das]

Based on the trace in the attachment, the sequence of config space
accesses leading up to the hang -

vfio: vfio_pci_write_config(0000:03:00.0, @0x78, 0x1, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x80, 0x9430, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x78, 0xa30c, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x80, 0x7fffffff, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x78, 0xa5dc, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x80, 0x0, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x78, 0xa2ec, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x80, 0x3, len=0x4)
vfio: vfio_pci_read_config(0000:03:00.0, @0x98, len=0x4) 200
vfio: vfio_pci_write_config(0000:03:00.0, @0x78, 0xa408, len=0x4)
vfio: vfio_pci_read_config(0000:03:00.0, @0x80, len=0x4) 8

vfio: vfio_pci_write_config(0000:03:00.0, @0x78, 0x86420, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x80, 0x4, len=0x4)
vfio: vfio_pci_write_config(0000:03:00.0, @0x78, 0x86420, len=0x4)
vfio: vfio_pci_read_config(0000:03:00.0, @0x80, len=0x4) 8

The last 4 writes co-relate to the point where the guest hangs because
they get repeated forever

** Attachment added: "Qemu Trace leading up to the hang"
   
https://bugs.launchpad.net/qemu/+bug/1284874/+attachment/3996932/+files/qemu_trace.txt

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1284874

Title:
  Guest hangs during option rom loading with certain cards

Status in QEMU:
  New

Bug description:
  With a Broadcom Corporation NetXtreme II BCM57810 10 Gigabit Ethernet
  card, device assignment does not work. The guest hangs during option
  rom execution. Moreover, if an attempt is made to quit qemu when the
  guest is in the hung state, the card gets into an inoperable state.
  Only a powercycle then, restores the card back into working order,
  just unloading/loading the driver does not help.

  Qemu version  - 1.6.2 or current master
  Distribution - FC19
  Kernel Version - 3.12.9-201.fc19.x86_64

  Details of the card - 
   # ethtool -i p2p2
  driver: bnx2x
  version: 1.78.17-0
  firmware-version: bc 7.8.22
  bus-info: 0000:08:00.1
  supports-statistics: yes
  supports-test: yes
  supports-eeprom-access: yes
  supports-register-dump: yes
  supports-priv-flags: yes

  The output of lspci when the card is broken -
  03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM57810 10 
Gigabit Ethernet (rev ff) (prog-if ff)
        !!! Unknown header type 7f
        Kernel driver in use: bnx2x
  00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

  I will post if I get a chance to try out a newer  than 7.8.22 for the
  option rom and see if this issue is fixed. However it appears we need
  to have a unified approach to automatically avoid loading the rom
  based on certain criteria.  Manually, looking out for fixes to
  firmware and hard coding decisions based on those is neither desirable
  nor easy to maintain.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1284874/+subscriptions