qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v2 23/35] target-arm: Implement AArch64 cache in


From: Peter Crosthwaite
Subject: Re: [Qemu-devel] [PATCH v2 23/35] target-arm: Implement AArch64 cache invalidate/clean ops
Date: Sun, 9 Feb 2014 12:22:14 +1000

On Sat, Feb 1, 2014 at 1:45 AM, Peter Maydell <address@hidden> wrote:
> Implement all the AArch64 cache invalidate and clean ops
> (which are all NOPs since QEMU doesn't emulate the cache).
> The only remaining unimplemented cache op is DC ZVA.
>
> Signed-off-by: Peter Maydell <address@hidden>

Reviewed-by: Peter Crosthwaite <address@hidden>

> ---
>  target-arm/helper.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
>
> diff --git a/target-arm/helper.c b/target-arm/helper.c
> index 82efbfa..b9ed707 100644
> --- a/target-arm/helper.c
> +++ b/target-arm/helper.c
> @@ -1533,6 +1533,18 @@ static void aa64_daif_write(CPUARMState *env, const 
> ARMCPRegInfo *ri,
>      env->pstate |= (value & PSTATE_DAIF);
>  }
>
> +static CPAccessResult aa64_cacheop_access(CPUARMState *env,
> +                                          const ARMCPRegInfo *ri)
> +{
> +    /* Cache invalidate/clean: NOP, but EL0 must UNDEF unless
> +     * SCTLR_EL1.UCI is set.
> +     */
> +    if (arm_current_pl(env) == 0 && !(env->cp15.c1_sys & SCTLR_UCI)) {
> +        return CP_ACCESS_TRAP;
> +    }
> +    return CP_ACCESS_OK;
> +}
> +
>  static const ARMCPRegInfo v8_cp_reginfo[] = {
>      /* Minimal set of EL0-visible registers. This will need to be expanded
>       * significantly for system emulation of AArch64 CPUs.
> @@ -1561,6 +1573,41 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
>      { .name = "CURRENTEL", .state = ARM_CP_STATE_AA64,
>        .opc0 = 3, .opc1 = 0, .opc2 = 2, .crn = 4, .crm = 2,
>        .access = PL1_R, .type = ARM_CP_CURRENTEL },
> +    /* Cache ops: all NOPs since we don't emulate caches */
> +    { .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0,
> +      .access = PL1_W, .type = ARM_CP_NOP },
> +    { .name = "IC_IALLU", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0,
> +      .access = PL1_W, .type = ARM_CP_NOP },
> +    { .name = "IC_IVAU", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1,
> +      .access = PL0_W, .type = ARM_CP_NOP,
> +      .accessfn = aa64_cacheop_access },
> +    { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1,
> +      .access = PL1_W, .type = ARM_CP_NOP },
> +    { .name = "DC_ISW", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2,
> +      .access = PL1_W, .type = ARM_CP_NOP },
> +    { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1,
> +      .access = PL0_W, .type = ARM_CP_NOP,
> +      .accessfn = aa64_cacheop_access },
> +    { .name = "DC_CSW", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2,
> +      .access = PL1_W, .type = ARM_CP_NOP },
> +    { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1,
> +      .access = PL0_W, .type = ARM_CP_NOP,
> +      .accessfn = aa64_cacheop_access },
> +    { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1,
> +      .access = PL0_W, .type = ARM_CP_NOP,
> +      .accessfn = aa64_cacheop_access },
> +    { .name = "DC_CISW", .state = ARM_CP_STATE_AA64,
> +      .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2,
> +      .access = PL1_W, .type = ARM_CP_NOP },
>      REGINFO_SENTINEL
>  };
>
> --
> 1.8.5
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]