[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on
From: |
Marcel Apfelbaum |
Subject: |
Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset. |
Date: |
Wed, 18 Dec 2013 18:49:24 +0200 |
On Wed, 2013-12-18 at 18:33 +0200, Michael S. Tsirkin wrote:
> On Wed, Dec 18, 2013 at 06:27:12PM +0200, Marcel Apfelbaum wrote:
> > On Wed, 2013-12-18 at 17:22 +0200, Michael S. Tsirkin wrote:
> > > On Wed, Dec 18, 2013 at 03:22:59PM +0100, Paolo Bonzini wrote:
> > > > Il 11/12/2013 10:21, Gal Hammer ha scritto:
> > > > > Fix a bug that was introduced in commit c046e8c4. QEMU fails to
> > > > > resume from suspend mode (S3).
> > > > >
> > > > > Signed-off-by: Gal Hammer <address@hidden>
> > > > > ---
> > > > > hw/acpi/piix4.c | 1 -
> > > > > 1 file changed, 1 deletion(-)
> > > > >
> > > > > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
> > > > > index 93849c8..5c736a4 100644
> > > > > --- a/hw/acpi/piix4.c
> > > > > +++ b/hw/acpi/piix4.c
> > > > > @@ -376,7 +376,6 @@ static void piix4_reset(void *opaque)
> > > > > pci_conf[0x5b] = 0;
> > > > >
> > > > > pci_conf[0x40] = 0x01; /* PM io base read only bit */
> > > > > - pci_conf[0x80] = 0;
> > > > >
> > > > > if (s->kvm_enabled) {
> > > > > /* Mark SMM as already inited (until KVM supports SMM). */
> > > >
> > > > Note this is not the APIC base address, that one is 80h on the ISA
> > > > bridge (function 0). You're changing the behavior for 80h on the power
> > > > management function, which is function 3. The register is "PMBA—POWER
> > > > MANAGEMENT BASE ADDRESS" and it is indeed initialized by SeaBIOS in
> > > > piix4_pm_setup (src/fw/pciinit.c).
> > > >
> > > > Michael, perhaps a part of pci_setup (same file) should run on S3
> > > > resume?
> > > >
> > > > Paolo
> > >
> > > Seems reasonable: either seabios or guest OS must do it, and
> > > guest does not seem to.
> > I was looking into this today, but it seems that we have a problem.
> > We cannot run pci_setup() in init section:
> > .data.varinit.seabios/src/hw/pci.h.66 is VARVERIFY32INIT but used from
> > ['.text.runtime.seabios/src/resume.c.150', '.text.pci_setup']
> >
> > Any thoughts how to get around this?
> > Thanks,
> > Marcel
>
> We defintely don't want to do full pci enumeration.
> Just pci_bios_init_platform or even less.
The problem still remains, we have to use pci_bios_init_device that
in turn uses the PCIDevices list.
Thanks,
Marcel
>
> > >
> >
> >
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., (continued)
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Michael S. Tsirkin, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Marcel Apfelbaum, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Michael S. Tsirkin, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Paolo Bonzini, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Michael S. Tsirkin, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Marcel Apfelbaum, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Michael S. Tsirkin, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Laszlo Ersek, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Laszlo Ersek, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Paolo Bonzini, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset.,
Marcel Apfelbaum <=
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Michael S. Tsirkin, 2013/12/18
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Marcel Apfelbaum, 2013/12/19
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Marcel Apfelbaum, 2013/12/19
- Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Michael S. Tsirkin, 2013/12/19
Re: [Qemu-devel] [PATCH] piix: do not reset APIC base address (0x80) on piix4_reset., Gal Hammer, 2013/12/18