[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [SeaBIOS] [BUG] Windows 7 fails to start with new vgabi
From: |
Gal Hammer |
Subject: |
Re: [Qemu-devel] [SeaBIOS] [BUG] Windows 7 fails to start with new vgabios binaries |
Date: |
Tue, 10 Dec 2013 04:55:36 -0500 (EST) |
Kevin,
The patch was verified and it solves the problem on Windows 7 official release
as well.
Thanks!
Gal.
----- Original Message -----
From: "Kevin O'Connor" <address@hidden>
To: "Gerd Hoffmann" <address@hidden>
Cc: "Gal Hammer" <address@hidden>, "seabios" <address@hidden>, address@hidden,
"Julian Pidancet" <address@hidden>
Sent: Tuesday, December 10, 2013 12:12:51 AM
Subject: Re: [SeaBIOS] [BUG] Windows 7 fails to start with new vgabios binaries
On Mon, Dec 09, 2013 at 10:57:25AM -0500, Kevin O'Connor wrote:
> On Mon, Dec 09, 2013 at 02:20:59PM +0100, Gerd Hoffmann wrote:
> > On Mo, 2013-12-09 at 14:18 +0200, Gal Hammer wrote:
> > > A Windows 7 (32-bit) VM running with QXL device fails to start with the
> > > new updated vgabios binaries (commit
> > Tracked down to the new vgabios stack switching. With
> > CONFIG_VGA_ALLOCATE_EXTRA_STACK=n everything is fine again.
>
> Ughh. WinXP doesn't have the problem, but I can also reproduce on
> Win7 beta.
>
> I'll change the default for CONFIG_VGA_ALLOCATE_EXTRA_STACK to off.
I tracked this down further. The problem is the Windows x86 emulator
doesn't correctly handle memory accesses relative to the %esp
register. Julian reported this some time back and we worked around it
then. However, the recent "extra stack" assembler code inserted a few
of these instructions.
I think the proper fix is to leave CONFIG_VGA_ALLOCATE_EXTRA_STACK on
and use slightly different assembler so as not to aggravate win7.
I tested the seabios patch below and my win7 beta now boots okay.
-Kevin
--- a/vgasrc/vgaentry.S
+++ b/vgasrc/vgaentry.S
@@ -97,12 +97,9 @@ entry_10_extrastack:
movl %ecx, BREGS_ecx(%eax)
movw %es, BREGS_es(%eax)
movl %esp, BREGS_size+0(%eax)
- movzwl %sp, %esp
movw %ss, BREGS_size+4(%eax)
- movl (%esp), %edx
- movl %edx, BREGS_code(%eax)
- movw 4(%esp), %dx
- movw %dx, BREGS_flags(%eax)
+ popl BREGS_code(%eax)
+ popw BREGS_flags(%eax)
movw %ds, %dx // Setup %ss/%esp and call function
movw %dx, %ss