qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v2] virtio: Introduce virtio-testdev


From: Andrew Jones
Subject: [Qemu-devel] [PATCH v2] virtio: Introduce virtio-testdev
Date: Wed, 4 Dec 2013 17:30:27 +0100

This is a virtio version of hw/misc/debugexit and should evolve into a
virtio version of pc-testdev. pc-testdev uses the PC's ISA bus, whereas
this testdev can be plugged into a virtio-mmio transport, which is
needed for kvm-unit-tests/arm. virtio-testdev uses the virtio device
config space as a communication channel, and implements an RTAS-like
protocol through it allowing guests to execute commands. Only three
commands are currently implemented;
1) VERSION: for version compatibility checks
2) CLEAR:   set all the config space back to zero
3) EXIT:    exit() from qemu with a status code

---
v2:
- No real functional changes, just added some comments and changed
  register bank accesses to use byte offsets, allowing the driver
  implementation to better mirror this device's implementation.

Signed-off-by: Andrew Jones <address@hidden>
---
 hw/virtio/Makefile.objs    |   1 +
 hw/virtio/virtio-testdev.c | 154 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 155 insertions(+)
 create mode 100644 hw/virtio/virtio-testdev.c

diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
index 1ba53d9cc316c..b63fea4a175f0 100644
--- a/hw/virtio/Makefile.objs
+++ b/hw/virtio/Makefile.objs
@@ -3,6 +3,7 @@ common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
 common-obj-y += virtio-bus.o
 common-obj-y += virtio-mmio.o
 common-obj-$(CONFIG_VIRTIO_BLK_DATA_PLANE) += dataplane/
+common-obj-y += virtio-testdev.o
 
 obj-y += virtio.o virtio-balloon.o 
 obj-$(CONFIG_LINUX) += vhost.o
diff --git a/hw/virtio/virtio-testdev.c b/hw/virtio/virtio-testdev.c
new file mode 100644
index 0000000000000..6f6a16e42006c
--- /dev/null
+++ b/hw/virtio/virtio-testdev.c
@@ -0,0 +1,154 @@
+/*
+ * Virtio Test Device
+ *
+ * Copyright (C) 2013 Red Hat, Inc.
+ * Copyright (C) 2013 Andrew Jones <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#include "hw/virtio/virtio-bus.h"
+
+#define VIRTIO_ID_TESTDEV 0xffff
+
+#define TYPE_VIRTIO_TESTDEV "virtio-testdev"
+#define VIRTIO_TESTDEV(obj) \
+        OBJECT_CHECK(VirtIOTestdev, (obj), TYPE_VIRTIO_TESTDEV)
+
+#define TESTDEV_MAJOR_VER 1
+#define TESTDEV_MINOR_VER 1
+
+/*
+ * Size of the register bank in bytes. The max is determined
+ * by the device's config space. For virtio-mmio devices we
+ * only have 256 bytes, so that's our max, but we don't need
+ * that much anyway. 64 bytes gives us token, nargs, nrets,
+ * and an additional 13 4-byte registers for input/output.
+ * That'll do.
+ */
+#define CONFIG_SIZE 64
+
+enum {
+    VERSION = 1,
+    CLEAR,
+    EXIT,
+};
+
+#define TOKEN_OFFSET            0x0
+#define NARGS_OFFSET            0x4
+#define NRETS_OFFSET            0x8
+#define ARG_OFFSET(n)           (0xc + (n) * 4)
+#define __RET_OFFSET(nargs, n)  (ARG_OFFSET(nargs) + (n) * 4)
+#define RET_OFFSET(d, n)        __RET_OFFSET(config_readl(d, NARGS_OFFSET), n)
+
+typedef struct VirtIOTestdev {
+    VirtIODevice parent_obj;
+    uint8_t config[CONFIG_SIZE];
+} VirtIOTestdev;
+
+static uint32_t config_readl(VirtIOTestdev *dev, unsigned offset)
+{
+    uint32_t *config = (uint32_t *)&dev->config[0];
+
+    if (offset > (CONFIG_SIZE - 4)) {
+        return 0;
+    }
+
+    return le32_to_cpu(config[offset / 4]);
+}
+
+static void config_writel(VirtIOTestdev *dev, unsigned offset, uint32_t val)
+{
+    uint32_t *config = (uint32_t *)&dev->config[0];
+
+    if (offset <= (CONFIG_SIZE - 4)) {
+        config[offset / 4] = cpu_to_le32(val);
+    }
+}
+
+static void virtio_testdev_get_config(VirtIODevice *vdev, uint8_t *config_data)
+{
+    VirtIOTestdev *dev = VIRTIO_TESTDEV(vdev);
+    memcpy(config_data, &dev->config[0], CONFIG_SIZE);
+}
+
+static void virtio_testdev_set_config(VirtIODevice *vdev,
+                                      const uint8_t *config_data)
+{
+    VirtIOTestdev *dev = VIRTIO_TESTDEV(vdev);
+    uint32_t token;
+
+    memcpy(&dev->config[0], config_data, CONFIG_SIZE);
+
+    token = config_readl(dev, TOKEN_OFFSET);
+
+    /*
+     * The token register must always remain zero in order to
+     * avoid re-executing operations while new operation
+     * arguments are being filled in.
+     */
+    config_writel(dev, TOKEN_OFFSET, 0);
+
+    switch (token) {
+    case 0:
+        /*
+         * No token yet, so we were just filling in arguments, and
+         * now there's nothing left to do.
+         */
+        return;
+    case VERSION:
+        config_writel(dev, RET_OFFSET(dev, 0),
+            (TESTDEV_MAJOR_VER << 16) | TESTDEV_MINOR_VER);
+        break;
+    case EXIT:
+        exit((config_readl(dev, ARG_OFFSET(0)) << 1) | 1);
+    case CLEAR:
+    default:
+        /* The CLEAR op and unknown ops reset all registers */
+        memset(&dev->config[0], 0, CONFIG_SIZE);
+    }
+}
+
+static uint32_t virtio_testdev_get_features(VirtIODevice *vdev, uint32_t f)
+{
+    return f;
+}
+
+static int virtio_testdev_init(VirtIODevice *vdev)
+{
+    virtio_init(vdev, "virtio-testdev", VIRTIO_ID_TESTDEV, CONFIG_SIZE);
+    return 0;
+}
+
+static int virtio_testdev_exit(DeviceState *qdev)
+{
+    virtio_cleanup(VIRTIO_DEVICE(qdev));
+    return 0;
+}
+
+static void virtio_testdev_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+    dc->exit = virtio_testdev_exit;
+    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+    vdc->init = virtio_testdev_init;
+    vdc->get_config = virtio_testdev_get_config;
+    vdc->set_config = virtio_testdev_set_config;
+    vdc->get_features = virtio_testdev_get_features;
+}
+
+static const TypeInfo virtio_testdev_info = {
+    .name = TYPE_VIRTIO_TESTDEV,
+    .parent = TYPE_VIRTIO_DEVICE,
+    .instance_size = sizeof(VirtIOTestdev),
+    .class_init = virtio_testdev_class_init,
+};
+
+static void virtio_register_types(void)
+{
+    type_register_static(&virtio_testdev_info);
+}
+
+type_init(virtio_register_types)
-- 
1.8.1.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]