qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 14/30] ahci: fix win7 hang on boot


From: Kevin Wolf
Subject: [Qemu-devel] [PULL 14/30] ahci: fix win7 hang on boot
Date: Thu, 31 Oct 2013 16:48:28 +0100

From: Alexander Graf <address@hidden>

When AHCI executes an asynchronous IDE command, it checked DRDY without
checking either DRQ or BSY.  This sometimes caused interrupt to be sent
before command is actually completed.

This resulted in a race condition: if guest then managed to access the
device before command has completed, it would hang waiting for an
interrupt.
This was observed with windows 7 guests.

To fix, check for DRQ or BSY in additiona to DRDY, if set,
the command is asynchronous so delay the interrupt until
asynchronous done callback is invoked.

Reported-by: Michael S. Tsirkin <address@hidden>
Reviewed-by: Michael S. Tsirkin <address@hidden>
Tested-by: Michael S. Tsirkin <address@hidden>
Signed-off-by: Michael S. Tsirkin <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
 hw/ide/ahci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index a8be62c..fbea9e8 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -961,7 +961,8 @@ static int handle_cmd(AHCIState *s, int port, int slot)
         /* We're ready to process the command in FIS byte 2. */
         ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
 
-        if (s->dev[port].port.ifs[0].status & READY_STAT) {
+        if ((s->dev[port].port.ifs[0].status & 
(READY_STAT|DRQ_STAT|BUSY_STAT)) ==
+            READY_STAT) {
             ahci_write_fis_d2h(&s->dev[port], cmd_fis);
         }
     }
-- 
1.8.1.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]