[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] Convert ram_list to RCU DQ V3
|
From: |
Mike Day |
|
Subject: |
[Qemu-devel] [PATCH] Convert ram_list to RCU DQ V3 |
|
Date: |
Wed, 4 Sep 2013 09:29:42 -0400 |
Changes from V2:
* added rcu reclaim function to free ram blocks
* reduced the number of comments
* made rcu locking policy consistent for different caller scenarios
* rcu updates to ram_block now are protected only by the iothread mutex
Changes from V1:
* Omitted locks or rcu critical sections within Some functions that
read or write the ram_list but are called in a protected context
(the caller holds the iothread lock, the ram_list mutex, or an rcu
critical section).
Allow "unlocked" reads of the ram_list by using an RCU-enabled
DQ. Most readers of the list no longer require holding the list mutex.
The ram_list now uses a QLIST instead of a QTAILQ. The difference is
minimal.
This patch has been built and make-checked for the x86_64, ppc64,
s390x, and arm targets. It has not been tested further than that at
this point.
To apply this patch, you must base upon Paolo Bonzini's rcu tree and
also apply the RCU DQ patch (below).
https://github.com/bonzini/qemu/tree/rcu
http://article.gmane.org/gmane.comp.emulators.qemu/230159/
Signed-off-by: Mike Day <address@hidden>
---
arch_init.c | 103 ++++++++++++++++++------------
exec.c | 160 +++++++++++++++++++++++++++++------------------
include/exec/cpu-all.h | 6 +-
include/qemu/rcu_queue.h | 8 +++
4 files changed, 173 insertions(+), 104 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 68a7ab7..4cb1543 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -49,6 +49,7 @@
#include "trace.h"
#include "exec/cpu-all.h"
#include "hw/acpi/acpi.h"
+#include "qemu/rcu_queue.h"
#ifdef DEBUG_ARCH_INIT
#define DPRINTF(fmt, ...) \
@@ -398,7 +399,8 @@ static void migration_bitmap_sync(void)
trace_migration_bitmap_sync_start();
address_space_sync_dirty_bitmap(&address_space_memory);
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
for (addr = 0; addr < block->length; addr += TARGET_PAGE_SIZE) {
if (memory_region_test_and_clear_dirty(block->mr,
addr, TARGET_PAGE_SIZE,
@@ -407,6 +409,8 @@ static void migration_bitmap_sync(void)
}
}
}
+ rcu_read_unlock();
+
trace_migration_bitmap_sync_end(migration_dirty_pages
- num_dirty_pages_init);
num_dirty_pages_period += migration_dirty_pages - num_dirty_pages_init;
@@ -446,6 +450,8 @@ static void migration_bitmap_sync(void)
*
* Returns: The number of bytes written.
* 0 means no dirty pages
+ *
+ * assumes that the caller has rcu-locked the ram_list
*/
static int ram_save_block(QEMUFile *f, bool last_stage)
@@ -457,8 +463,9 @@ static int ram_save_block(QEMUFile *f, bool last_stage)
MemoryRegion *mr;
ram_addr_t current_addr;
+
if (!block)
- block = QTAILQ_FIRST(&ram_list.blocks);
+ block = QLIST_FIRST_RCU(&ram_list.blocks);
while (true) {
mr = block->mr;
@@ -469,9 +476,9 @@ static int ram_save_block(QEMUFile *f, bool last_stage)
}
if (offset >= block->length) {
offset = 0;
- block = QTAILQ_NEXT(block, next);
+ block = QLIST_NEXT_RCU(block, next);
if (!block) {
- block = QTAILQ_FIRST(&ram_list.blocks);
+ block = QLIST_FIRST_RCU(&ram_list.blocks);
complete_round = true;
ram_bulk_stage = false;
}
@@ -526,9 +533,9 @@ static int ram_save_block(QEMUFile *f, bool last_stage)
}
}
}
+
last_seen_block = block;
last_offset = offset;
-
return bytes_sent;
}
@@ -565,10 +572,10 @@ uint64_t ram_bytes_total(void)
{
RAMBlock *block;
uint64_t total = 0;
-
- QTAILQ_FOREACH(block, &ram_list.blocks, next)
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next)
total += block->length;
-
+ rcu_read_unlock();
return total;
}
@@ -602,10 +609,20 @@ static void reset_ram_globals(void)
last_offset = 0;
last_version = ram_list.version;
ram_bulk_stage = true;
+ smp_wmb();
}
#define MAX_WAIT 50 /* ms, half buffered_file limit */
+
+/* ram_save_* functions each implement a long-running RCU critical
+ * section. When rcu-reclaims in the code start to become numerous
+ * it will be necessary to reduce the granularity of these critical
+ * sections.
+ *
+ * (ram_save_setup, ram_save_iterate, and ram_save_complete.)
+ */
+
static int ram_save_setup(QEMUFile *f, void *opaque)
{
RAMBlock *block;
@@ -631,7 +648,7 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
}
qemu_mutex_lock_iothread();
- qemu_mutex_lock_ramlist();
+ rcu_read_lock();
bytes_transferred = 0;
reset_ram_globals();
@@ -641,13 +658,13 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
qemu_put_byte(f, strlen(block->idstr));
qemu_put_buffer(f, (uint8_t *)block->idstr, strlen(block->idstr));
qemu_put_be64(f, block->length);
}
- qemu_mutex_unlock_ramlist();
+ rcu_read_unlock();
ram_control_before_iterate(f, RAM_CONTROL_SETUP);
ram_control_after_iterate(f, RAM_CONTROL_SETUP);
@@ -657,6 +674,7 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
return 0;
}
+
static int ram_save_iterate(QEMUFile *f, void *opaque)
{
int ret;
@@ -664,16 +682,14 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
int64_t t0;
int total_sent = 0;
- qemu_mutex_lock_ramlist();
-
- if (ram_list.version != last_version) {
+ if (atomic_rcu_read(&ram_list.version) != last_version) {
reset_ram_globals();
}
ram_control_before_iterate(f, RAM_CONTROL_ROUND);
-
t0 = qemu_get_clock_ns(rt_clock);
i = 0;
+ rcu_read_lock();
while ((ret = qemu_file_rate_limit(f)) == 0) {
int bytes_sent;
@@ -700,9 +716,7 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
}
i++;
}
-
- qemu_mutex_unlock_ramlist();
-
+ rcu_read_unlock();
/*
* Must occur before EOS (or any QEMUFile operation)
* because of RDMA protocol.
@@ -717,19 +731,21 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
total_sent += 8;
bytes_transferred += total_sent;
-
return total_sent;
}
static int ram_save_complete(QEMUFile *f, void *opaque)
{
- qemu_mutex_lock_ramlist();
+
+ qemu_mutex_lock_iothread();
migration_bitmap_sync();
+ qemu_mutex_unlock_iothread();
ram_control_before_iterate(f, RAM_CONTROL_FINISH);
/* try transferring iterative blocks of memory */
+ rcu_read_lock();
/* flush all remaining blocks regardless of rate limiting */
while (true) {
int bytes_sent;
@@ -741,11 +757,10 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
}
bytes_transferred += bytes_sent;
}
-
+ rcu_read_unlock();
ram_control_after_iterate(f, RAM_CONTROL_FINISH);
migration_end();
- qemu_mutex_unlock_ramlist();
qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
return 0;
@@ -807,6 +822,9 @@ static int load_xbzrle(QEMUFile *f, ram_addr_t addr, void
*host)
return rc;
}
+/* Must be called from within a rcu critical section.
+ * Returns a pointer from within the RCU-protected ram_list.
+ */
static inline void *host_from_stream_offset(QEMUFile *f,
ram_addr_t offset,
int flags)
@@ -828,9 +846,10 @@ static inline void *host_from_stream_offset(QEMUFile *f,
qemu_get_buffer(f, (uint8_t *)id, len);
id[len] = 0;
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
- if (!strncmp(id, block->idstr, sizeof(id)))
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (!strncmp(id, block->idstr, sizeof(id))) {
return memory_region_get_ram_ptr(block->mr) + offset;
+ }
}
fprintf(stderr, "Can't find block %s!\n", id);
@@ -867,7 +886,12 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
if (version_id < 4 || version_id > 4) {
return -EINVAL;
}
-
+ /* this implements a long-running RCU critical section.
+ * When rcu reclaims in the code start to become numerous
+ * it will be necessary to reduce the granularity of this critical
+ * section.
+ */
+ rcu_read_lock();
do {
addr = qemu_get_be64(f);
@@ -889,21 +913,19 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
qemu_get_buffer(f, (uint8_t *)id, len);
id[len] = 0;
length = qemu_get_be64(f);
-
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (!strncmp(id, block->idstr, sizeof(id))) {
if (block->length != length) {
fprintf(stderr,
"Length mismatch: %s: " RAM_ADDR_FMT
" in != " RAM_ADDR_FMT "\n", id,
length,
block->length);
- ret = -EINVAL;
+ ret = -EINVAL;
goto done;
}
break;
}
}
-
if (!block) {
fprintf(stderr, "Unknown ramblock \"%s\", cannot "
"accept migration\n", id);
@@ -916,30 +938,30 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
}
}
+ /* Call host_from_stream_offset while holding an rcu read lock.
+ * It returns a pointer from within the rcu-protected ram_list.
+ */
if (flags & RAM_SAVE_FLAG_COMPRESS) {
- void *host;
uint8_t ch;
-
- host = host_from_stream_offset(f, addr, flags);
+ void *host = host_from_stream_offset(f, addr, flags);
if (!host) {
- return -EINVAL;
+ ret = -EINVAL;
+ goto done;
}
-
ch = qemu_get_byte(f);
ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
} else if (flags & RAM_SAVE_FLAG_PAGE) {
- void *host;
-
- host = host_from_stream_offset(f, addr, flags);
+ void *host = host_from_stream_offset(f, addr, flags);
if (!host) {
- return -EINVAL;
+ ret = -EINVAL;
+ goto done;
}
-
qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
} else if (flags & RAM_SAVE_FLAG_XBZRLE) {
void *host = host_from_stream_offset(f, addr, flags);
if (!host) {
- return -EINVAL;
+ ret = -EINVAL;
+ goto done;
}
if (load_xbzrle(f, addr, host) < 0) {
@@ -957,6 +979,7 @@ static int ram_load(QEMUFile *f, void *opaque, int
version_id)
} while (!(flags & RAM_SAVE_FLAG_EOS));
done:
+ rcu_read_unlock();
DPRINTF("Completed load of VM with exit code %d seq iteration "
"%" PRIu64 "\n", ret, seq_iter);
return ret;
diff --git a/exec.c b/exec.c
index 5eebcc1..52b282a 100644
--- a/exec.c
+++ b/exec.c
@@ -46,7 +46,7 @@
#endif
#include "exec/cpu-all.h"
#include "qemu/tls.h"
-
+#include "qemu/rcu_queue.h"
#include "exec/cputlb.h"
#include "translate-all.h"
@@ -57,7 +57,10 @@
#if !defined(CONFIG_USER_ONLY)
static int in_migration;
-RAMList ram_list = { .blocks = QTAILQ_HEAD_INITIALIZER(ram_list.blocks) };
+/* ram_list is enabled for RCU access - writes should be protected
+ * by the iothread lock or an equivalent mutex.
+ */
+RAMList ram_list = { .blocks = QLIST_HEAD_INITIALIZER(ram_list.blocks) };
static MemoryRegion *system_memory;
static MemoryRegion *system_io;
@@ -1021,17 +1024,24 @@ static ram_addr_t find_ram_offset(ram_addr_t size)
RAMBlock *block, *next_block;
ram_addr_t offset = RAM_ADDR_MAX, mingap = RAM_ADDR_MAX;
+ /* ram_list must be protected by a mutex (for writes), or
+ * an rcu critical section (for reads). Currently this code
+ * is called with the iothread lock held. If that changes,
+ * make sure to protect ram_list with an rcu critical section.
+ */
+
assert(size != 0); /* it would hand out same offset multiple times */
- if (QTAILQ_EMPTY(&ram_list.blocks))
+ if (QLIST_EMPTY_RCU(&ram_list.blocks)) {
return 0;
+ }
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
ram_addr_t end, next = RAM_ADDR_MAX;
end = block->offset + block->length;
- QTAILQ_FOREACH(next_block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(next_block, &ram_list.blocks, next) {
if (next_block->offset >= end) {
next = MIN(next, next_block->offset);
}
@@ -1056,9 +1066,11 @@ ram_addr_t last_ram_offset(void)
RAMBlock *block;
ram_addr_t last = 0;
- QTAILQ_FOREACH(block, &ram_list.blocks, next)
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
last = MAX(last, block->offset + block->length);
-
+ }
+ rcu_read_unlock();
return last;
}
@@ -1083,7 +1095,12 @@ void qemu_ram_set_idstr(ram_addr_t addr, const char
*name, DeviceState *dev)
RAMBlock *new_block, *block;
new_block = NULL;
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+
+ /* Assumes that the iothread lock is taken ... if that changes,
+ * add an rcu_read_lock()/unlock pair when traversing the
+ * ram list
+ */
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (block->offset == addr) {
new_block = block;
break;
@@ -1102,15 +1119,13 @@ void qemu_ram_set_idstr(ram_addr_t addr, const char
*name, DeviceState *dev)
pstrcat(new_block->idstr, sizeof(new_block->idstr), name);
/* This assumes the iothread lock is taken here too. */
- qemu_mutex_lock_ramlist();
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (block != new_block && !strcmp(block->idstr, new_block->idstr)) {
fprintf(stderr, "RAMBlock \"%s\" already registered, abort!\n",
new_block->idstr);
abort();
}
}
- qemu_mutex_unlock_ramlist();
}
static int memory_try_enable_merging(void *addr, size_t len)
@@ -1123,16 +1138,18 @@ static int memory_try_enable_merging(void *addr, size_t
len)
return qemu_madvise(addr, len, QEMU_MADV_MERGEABLE);
}
+/* Called with the iothread lock being held, so we can
+ * foregoe protecting the ram_list. When that changes,
+ * acquire the iothread mutex before writing the list below.
+ */
ram_addr_t qemu_ram_alloc_from_ptr(ram_addr_t size, void *host,
MemoryRegion *mr)
{
- RAMBlock *block, *new_block;
+ RAMBlock *block, *new_block, *last_block = 0;
size = TARGET_PAGE_ALIGN(size);
new_block = g_malloc0(sizeof(*new_block));
- /* This assumes the iothread lock is taken here too. */
- qemu_mutex_lock_ramlist();
new_block->mr = mr;
new_block->offset = find_ram_offset(size);
if (host) {
@@ -1165,21 +1182,24 @@ ram_addr_t qemu_ram_alloc_from_ptr(ram_addr_t size,
void *host,
new_block->length = size;
/* Keep the list sorted from biggest to smallest block. */
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ last_block = block;
if (block->length < new_block->length) {
break;
}
}
if (block) {
- QTAILQ_INSERT_BEFORE(block, new_block, next);
+ QLIST_INSERT_BEFORE_RCU(block, new_block, next);
} else {
- QTAILQ_INSERT_TAIL(&ram_list.blocks, new_block, next);
+ if (last_block) {
+ QLIST_INSERT_AFTER_RCU(last_block, new_block, next);
+ } else { /* list is empty */
+ QLIST_INSERT_HEAD_RCU(&ram_list.blocks, new_block, next);
+ }
}
ram_list.mru_block = NULL;
ram_list.version++;
- qemu_mutex_unlock_ramlist();
-
ram_list.phys_dirty = g_realloc(ram_list.phys_dirty,
last_ram_offset() >> TARGET_PAGE_BITS);
memset(ram_list.phys_dirty + (new_block->offset >> TARGET_PAGE_BITS),
@@ -1200,33 +1220,40 @@ ram_addr_t qemu_ram_alloc(ram_addr_t size, MemoryRegion
*mr)
return qemu_ram_alloc_from_ptr(size, NULL, mr);
}
+static void reclaim_ramblock(struct rcu_head *prcu)
+{
+ RAMBlock *block = container_of(prcu, struct RAMBlock, rcu);
+ g_free(block);
+}
+
+
void qemu_ram_free_from_ptr(ram_addr_t addr)
{
RAMBlock *block;
- /* This assumes the iothread lock is taken here too. */
- qemu_mutex_lock_ramlist();
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ /* This assumes the iothread lock is taken here too. */
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (addr == block->offset) {
- QTAILQ_REMOVE(&ram_list.blocks, block, next);
+ QLIST_REMOVE_RCU(block, next);
ram_list.mru_block = NULL;
ram_list.version++;
- g_free(block);
+ call_rcu1(&block->rcu, reclaim_ramblock);
break;
}
}
- qemu_mutex_unlock_ramlist();
}
void qemu_ram_free(ram_addr_t addr)
{
RAMBlock *block;
- /* This assumes the iothread lock is taken here too. */
- qemu_mutex_lock_ramlist();
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ /* This assumes the iothread lock is taken here too.
+ * if that changes, accesses to ram_list need to be protected
+ * by a mutex (writes) or an rcu read lock (reads)
+ */
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (addr == block->offset) {
- QTAILQ_REMOVE(&ram_list.blocks, block, next);
+ QLIST_REMOVE_RCU(block, next);
ram_list.mru_block = NULL;
ram_list.version++;
if (block->flags & RAM_PREALLOC_MASK) {
@@ -1249,12 +1276,10 @@ void qemu_ram_free(ram_addr_t addr)
qemu_anon_ram_free(block->host, block->length);
}
}
- g_free(block);
+ call_rcu1(&block->rcu, reclaim_ramblock);
break;
}
}
- qemu_mutex_unlock_ramlist();
-
}
#ifndef _WIN32
@@ -1265,7 +1290,7 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length)
int flags;
void *area, *vaddr;
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
offset = addr - block->offset;
if (offset < block->length) {
vaddr = block->host + offset;
@@ -1313,7 +1338,6 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length)
memory_try_enable_merging(vaddr, length);
qemu_ram_setup_dump(vaddr, length);
}
- return;
}
}
}
@@ -1323,23 +1347,21 @@ static RAMBlock *qemu_get_ram_block(ram_addr_t addr)
{
RAMBlock *block;
- /* The list is protected by the iothread lock here. */
+ /* This assumes the iothread lock is taken here too. */
+
block = ram_list.mru_block;
if (block && addr - block->offset < block->length) {
- goto found;
+ return block;
}
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (addr - block->offset < block->length) {
- goto found;
+ ram_list.mru_block = block;
+ return block;;
}
}
fprintf(stderr, "Bad ram offset %" PRIx64 "\n", (uint64_t)addr);
abort();
-
-found:
- ram_list.mru_block = block;
- return block;
}
/* Return a host pointer to ram allocated with qemu_ram_alloc.
@@ -1378,8 +1400,8 @@ static void *qemu_safe_ram_ptr(ram_addr_t addr)
{
RAMBlock *block;
- /* The list is protected by the iothread lock here. */
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ /* This assumes the iothread lock is taken here too. */
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (addr - block->offset < block->length) {
if (xen_enabled()) {
/* We need to check if the requested address is in the RAM
@@ -1399,14 +1421,19 @@ static void *qemu_safe_ram_ptr(ram_addr_t addr)
fprintf(stderr, "Bad ram offset %" PRIx64 "\n", (uint64_t)addr);
abort();
-
return NULL;
}
/* Return a host pointer to guest's ram. Similar to qemu_get_ram_ptr
- * but takes a size argument */
+ * but takes a size argument
+ *
+ * The returned pointer is not protected by RCU so the caller
+ * must have other means of protecting the pointer, such as a
+ * reference.
+ * */
static void *qemu_ram_ptr_length(ram_addr_t addr, hwaddr *size)
{
+ void *ptr = NULL;
if (*size == 0) {
return NULL;
}
@@ -1414,12 +1441,14 @@ static void *qemu_ram_ptr_length(ram_addr_t addr,
hwaddr *size)
return xen_map_cache(addr, *size, 1);
} else {
RAMBlock *block;
-
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (addr - block->offset < block->length) {
if (addr - block->offset + *size > block->length)
*size = block->length - addr + block->offset;
- return block->host + (addr - block->offset);
+ ptr = block->host + (addr - block->offset);
+ rcu_read_unlock();
+ return ptr;
}
}
@@ -1429,37 +1458,43 @@ static void *qemu_ram_ptr_length(ram_addr_t addr,
hwaddr *size)
}
/* Some of the softmmu routines need to translate from a host pointer
- (typically a TLB entry) back to a ram offset. */
+ * (typically a TLB entry) back to a ram offset.
+ *
+ * Note that the returned MemoryRegion is not RCU-protected.
+ */
MemoryRegion *qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
{
RAMBlock *block;
uint8_t *host = ptr;
+ MemoryRegion *mr = NULL;
if (xen_enabled()) {
*ram_addr = xen_ram_addr_from_mapcache(ptr);
return qemu_get_ram_block(*ram_addr)->mr;
}
-
- block = ram_list.mru_block;
+ rcu_read_lock();
+ block = atomic_rcu_read(&ram_list.mru_block);
if (block && block->host && host - block->host < block->length) {
- goto found;
+ *ram_addr = block->offset + (host - block->host);
+ mr = block->mr;
+ goto unlock_out;
}
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
/* This case append when the block is not mapped. */
if (block->host == NULL) {
continue;
}
if (host - block->host < block->length) {
- goto found;
+ *ram_addr = block->offset + (host - block->host);
+ mr = block->mr;
+ goto unlock_out;
}
}
- return NULL;
-
-found:
- *ram_addr = block->offset + (host - block->host);
- return block->mr;
+unlock_out:
+ rcu_read_unlock();
+ return mr;
}
static void notdirty_mem_write(void *opaque, hwaddr ram_addr,
@@ -2709,9 +2744,10 @@ bool cpu_physical_memory_is_io(hwaddr phys_addr)
void qemu_ram_foreach_block(RAMBlockIterFunc func, void *opaque)
{
RAMBlock *block;
-
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
func(block->host, block->offset, block->length, opaque);
}
+ rcu_read_unlock();
}
#endif
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index e088089..53aa70d 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -24,6 +24,7 @@
#include "qemu/thread.h"
#include "qom/cpu.h"
#include "qemu/tls.h"
+#include "qemu/rcu.h"
/* some important defines:
*
@@ -448,6 +449,7 @@ extern ram_addr_t ram_size;
#define RAM_PREALLOC_MASK (1 << 0)
typedef struct RAMBlock {
+ struct rcu_head rcu;
struct MemoryRegion *mr;
uint8_t *host;
ram_addr_t offset;
@@ -457,7 +459,7 @@ typedef struct RAMBlock {
/* Reads can take either the iothread or the ramlist lock.
* Writes must take both locks.
*/
- QTAILQ_ENTRY(RAMBlock) next;
+ QLIST_ENTRY(RAMBlock) next;
#if defined(__linux__) && !defined(TARGET_S390X)
int fd;
#endif
@@ -469,7 +471,7 @@ typedef struct RAMList {
uint8_t *phys_dirty;
RAMBlock *mru_block;
/* Protected by the ramlist lock. */
- QTAILQ_HEAD(, RAMBlock) blocks;
+ QLIST_HEAD(, RAMBlock) blocks;
uint32_t version;
} RAMList;
extern RAMList ram_list;
diff --git a/include/qemu/rcu_queue.h b/include/qemu/rcu_queue.h
index e2b8ba5..d159850 100644
--- a/include/qemu/rcu_queue.h
+++ b/include/qemu/rcu_queue.h
@@ -37,6 +37,14 @@
extern "C" {
#endif
+
+/*
+ * List access methods.
+ */
+#define QLIST_EMPTY_RCU(head) (atomic_rcu_read(&(head)->lh_first) == NULL)
+#define QLIST_FIRST_RCU(head) (atomic_rcu_read(&(head)->lh_first))
+#define QLIST_NEXT_RCU(elm, field) (atomic_rcu_read(&(elm)->field.le_next))
+
/*
* List functions.
*/
--
1.8.3.1
- [Qemu-devel] [PATCH] Convert ram_list to RCU DQ V3,
Mike Day <=