qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC] [PATCHv8 00/30] aio / timers: Add AioContext time


From: liu ping fan
Subject: Re: [Qemu-devel] [RFC] [PATCHv8 00/30] aio / timers: Add AioContext timers and use ppoll
Date: Fri, 9 Aug 2013 16:24:38 +0800

On Fri, Aug 9, 2013 at 4:12 PM, Jan Kiszka <address@hidden> wrote:
> On 2013-08-08 23:41, Alex Bligh wrote:
>> This patch series adds support for timers attached to an AioContext clock
>> which get called within aio_poll.
>>
>> In doing so it removes alarm timers and moves to use ppoll where possible.
>>
>> This patch set 'sort of' passes make check (see below for caveat)
>> including a new test harness for the aio timers, but has not been
>> tested much beyond that. In particular, the win32 changes have not
>> even been compile tested. Equally, alterations to use_icount
>> are untested.
>>
>> Caveat: I have had to alter tests/test-aio.c so the following error
>> no longer occurs.
>>
>> ERROR:tests/test-aio.c:346:test_wait_event_notifier_noflush: assertion 
>> failed: (aio_poll(ctx, false))
>>
>> As gar as I can tell, this check was incorrect, in that it checking
>> aio_poll makes progress when in fact it should not make progress. I
>> fixed an issue where aio_poll was (as far as I can tell) wrongly
>> returning true on a timeout, and that generated this error.
>>
>> Note also the comment on patch 18 in relation to a possible bug
>> in cpus.c.
>>
>> The penultimate patch is patch which is created in an automated manner
>> using scripts/switch-timer-api, added in this patch set. It violates some
>> coding standards (e.g. line length >= 80 characters), but this is preferable
>> in terms of giving a provably correct conversion.
>>
>> This patch set has been compile tested & make check tested on a
>> 'christmas-tree' configuration, meaning a configuration with every
>> --enable- value tested that can be easily configured on Ubuntu Precise,
>> after application of each patch.
>>
>> Changes since v7:
>> * Rebase to master 6fdf98f281f85ae6e2883bed2f691bcfe33b1f9f
>> * Add qemu_clock_get_ms and qemu_clock_get_ms
>> * Rename qemu_get_clock to qemu_clock_ptr
>> * Reorder qemu-timer.h to utilise the legacy API
>> * Hide qemu_clock_new & qemu_clock_free
>> * Rename default_timerlist to main_loop_timerlist
>> * Remove main_loop_timerlist once main_loop_tlg is in
>> * Add script to convert to new API
>> * Make rtc_clock use new API
>> * Convert tests/test-aio to use new API
>> * Run script on entire source code
>> * Remove legacy API functions
>>
>> Changes since v6:
>> * Fix build failure in vnc-auth-sasl.c
>> * Split first patch into 3
>> * Add assert on timerlist_free
>> * Fix ==/= error on qemu_clock_use_for_deadline
>> * Remove unnecessary cast in aio_timerlist_notify
>> * Fix bad deadline comparison in aio_ctx_check
>> * Add assert to timerlist_new_from_clock to check init_clocks
>> * Use timer_list not tl
>> * Change default_timerlistgroup to main_loop_timerlistgroup
>> * Add comment on commit for qemu_clock_use_for_deadline
>> * Fixed various include file issues
>> * Convert *_has_timers and *_has_expired to return bool
>> * Make loop variable consistent when looping through clock types
>> * Add documentation to existing qemu_timer calls
>> * Remove qemu_clock_deadline and move to qemu_clock_deadline_ns
>>
>> Changes since v5:
>> * Rebase onto master (b9ac5d9)
>> * Fix spacing in typedef QEMUTimerList
>> * Rename 'QEMUClocks' extern to 'qemu_clocks'
>>
>> Changes since v4:
>> * Rename qemu_timerlist_ functions to timer_list (per Paolo Bonzini)
>> * Rename qemu_timer_.*timerlist.* to timer_ (per Paolo Bonzini)
>> * Use enum for QEMUClockType
>> * Put clocks into an array; remove global variables
>> * Introduce QEMUTimerListGroup - a timeliest of each type
>> * Add a QEMUTimerListGroup to AioContext
>> * Use a callback on timer modification, rather than binding in
>>   AioContext into the timeliest
>> * Make cpus.c iterate over all timerlists when it does a notify
>> * Make cpus.c icount timeout use soonest timeout
>>   across all timerlists
>>
>> Changes since v3:
>> * Split up QEMUClock and QEMUClock list
>> * Improve commenting
>> * Fix comment in vl.c
>> * Change test/test-aio.c to reflect correct behaviour in aio_poll.
>>
>> Changes since v2:
>> * Reordered to remove alarm timers last
>> * Added prctl(PR_SET_TIMERSLACK, 1, ...)
>> * Renamed qemu_g_poll_ns to qemu_poll_ns
>> * Moved declaration of above & drop glib types
>> * Do not use a global list of qemu clocks
>> * Add AioContext * to QEMUClock
>> * Split up conversion to use ppoll and timers
>> * Indentation fix
>> * Fix aio_win32.c aio_poll to return progress
>> * aio_notify / qemu_notify when timers are modified
>> * change comment in deprecation of clock options
>>
>> Alex Bligh (30):
>>   aio / timers: Rename qemu_new_clock and expose clock types
>>   aio / timers: add qemu-timer.c utility functions
>>   aio / timers: Consistent treatment of disabled clocks for deadlines
>>   aio / timers: add ppoll support with qemu_poll_ns
>>   aio / timers: Add prctl(PR_SET_TIMERSLACK, 1, ...) to reduce timer
>>     slack
>>   aio / timers: Make qemu_run_timers and qemu_run_all_timers return
>>     progress
>>   aio / timers: Split QEMUClock into QEMUClock and QEMUTimerList
>>   aio / timers: Untangle include files
>>   aio / timers: Add QEMUTimerListGroup and helper functions
>>   aio / timers: Add QEMUTimerListGroup to AioContext
>>   aio / timers: Add a notify callback to QEMUTimerList
>>   aio / timers: aio_ctx_prepare sets timeout from AioContext timers
>>   aio / timers: Add aio_timer_new wrapper
>>   aio / timers: Convert aio_poll to use AioContext timers' deadline
>>   aio / timers: Convert mainloop to use timeout
>>   aio / timers: On timer modification, qemu_notify or aio_notify
>>   aio / timers: Introduce new API qemu_timer_new and friends
>>   aio / timers: Use all timerlists in icount warp calculations
>>   aio / timers: Add documentation and new format calls
>>   aio / timers: Remove alarm timers
>>   aio / timers: Remove legacy qemu_clock_deadline &
>>     qemu_timerlist_deadline
>>   aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
>>   aio / timers: Rearrange timer.h & make legacy functions call
>>     non-legacy
>>   aio / timers: Remove main_loop_timerlist
>>   aio / timers: Convert rtc_clock to be a QEMUClockType
>>   aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
>>   aio / timers: Add test harness for AioContext timers
>>   aio / timers: Add scripts/switch-timer-api
>>   aio / timers: Switch entire codebase to the new timer API
>>   aio / timers: Remove legacy interface
>>
>>  aio-posix.c                 |   20 +-
>>  aio-win32.c                 |   22 +-
>>  arch_init.c                 |   12 +-
>>  async.c                     |   20 +-
>>  audio/audio.c               |    6 +-
>>  audio/noaudio.c             |    4 +-
>>  audio/spiceaudio.c          |    4 +-
>>  audio/wavaudio.c            |    2 +-
>>  backends/baum.c             |   12 +-
>>  block.c                     |   14 +-
>>  block/backup.c              |    4 +-
>>  block/commit.c              |    2 +-
>>  block/iscsi.c               |   14 +-
>>  block/mirror.c              |   10 +-
>>  block/qed.c                 |   10 +-
>>  block/stream.c              |    2 +-
>>  blockdev.c                  |    2 +-
>>  blockjob.c                  |    4 +-
>>  configure                   |   37 ++
>>  cpus.c                      |  138 +++++---
>>  dma-helpers.c               |    1 +
>>  hmp.c                       |    8 +-
>>  hw/acpi/core.c              |    8 +-
>>  hw/acpi/piix4.c             |    2 +-
>>  hw/alpha/typhoon.c          |    2 +-
>>  hw/arm/omap1.c              |   52 +--
>>  hw/arm/pxa2xx.c             |   61 ++--
>>  hw/arm/spitz.c              |    6 +-
>>  hw/arm/stellaris.c          |   10 +-
>>  hw/arm/strongarm.c          |   34 +-
>>  hw/audio/adlib.c            |    2 +-
>>  hw/audio/intel-hda.c        |    4 +-
>>  hw/audio/sb16.c             |    6 +-
>>  hw/block/fdc.c              |    6 +-
>>  hw/block/nvme.c             |   20 +-
>>  hw/block/pflash_cfi01.c     |    2 +-
>>  hw/block/pflash_cfi02.c     |   10 +-
>>  hw/bt/hci-csr.c             |    4 +-
>>  hw/bt/hci.c                 |   38 +-
>>  hw/bt/l2cap.c               |    8 +-
>>  hw/char/cadence_uart.c      |   12 +-
>>  hw/char/serial.c            |   22 +-
>>  hw/char/virtio-serial-bus.c |   10 +-
>>  hw/core/ptimer.c            |   18 +-
>>  hw/display/qxl-logger.c     |    2 +-
>>  hw/display/qxl.c            |    2 +-
>>  hw/display/vga.c            |    6 +-
>>  hw/dma/pl330.c              |    6 +-
>>  hw/dma/rc4030.c             |    4 +-
>>  hw/dma/soc_dma.c            |    8 +-
>>  hw/dma/xilinx_axidma.c      |    1 +
>>  hw/i386/kvm/apic.c          |    2 +-
>>  hw/i386/kvm/i8254.c         |    6 +-
>>  hw/i386/xen_domainbuild.c   |    6 +-
>>  hw/ide/core.c               |    6 +-
>>  hw/input/hid.c              |   10 +-
>>  hw/input/lm832x.c           |    8 +-
>>  hw/input/tsc2005.c          |   14 +-
>>  hw/input/tsc210x.c          |   30 +-
>>  hw/intc/apic.c              |   16 +-
>>  hw/intc/apic_common.c       |    2 +-
>>  hw/intc/armv7m_nvic.c       |   16 +-
>>  hw/intc/i8259.c             |    4 +-
>>  hw/mips/cputimer.c          |   12 +-
>>  hw/misc/arm_sysctl.c        |    2 +-
>>  hw/misc/macio/cuda.c        |   34 +-
>>  hw/misc/macio/macio.c       |    4 +-
>>  hw/misc/vfio.c              |   14 +-
>>  hw/net/dp8393x.c            |   20 +-
>>  hw/net/e1000.c              |   12 +-
>>  hw/net/lan9118.c            |    4 +-
>>  hw/net/pcnet-pci.c          |    4 +-
>>  hw/net/pcnet.c              |   10 +-
>>  hw/net/rtl8139.c            |   28 +-
>>  hw/net/virtio-net.c         |   20 +-
>>  hw/openrisc/cputimer.c      |   10 +-
>>  hw/ppc/ppc.c                |   64 ++--
>>  hw/ppc/ppc405_uc.c          |    8 +-
>>  hw/ppc/ppc_booke.c          |   10 +-
>>  hw/ppc/spapr.c              |    8 +-
>>  hw/sd/sdhci.c               |   28 +-
>>  hw/sparc64/sun4u.c          |   24 +-
>>  hw/timer/arm_mptimer.c      |   12 +-
>>  hw/timer/arm_timer.c        |    1 +
>>  hw/timer/cadence_ttc.c      |    6 +-
>>  hw/timer/etraxfs_timer.c    |    2 +-
>>  hw/timer/exynos4210_mct.c   |    3 +-
>>  hw/timer/exynos4210_pwm.c   |    1 +
>>  hw/timer/grlib_gptimer.c    |    2 +
>>  hw/timer/hpet.c             |   20 +-
>>  hw/timer/i8254.c            |   26 +-
>>  hw/timer/i8254_common.c     |    4 +-
>>  hw/timer/imx_epit.c         |    1 +
>>  hw/timer/imx_gpt.c          |    1 +
>>  hw/timer/lm32_timer.c       |    1 +
>>  hw/timer/m48t59.c           |   18 +-
>>  hw/timer/mc146818rtc.c      |   44 +--
>>  hw/timer/omap_gptimer.c     |   24 +-
>>  hw/timer/omap_synctimer.c   |    2 +-
>>  hw/timer/pl031.c            |   19 +-
>>  hw/timer/puv3_ost.c         |    1 +
>>  hw/timer/pxa2xx_timer.c     |   34 +-
>>  hw/timer/sh_timer.c         |    1 +
>>  hw/timer/slavio_timer.c     |    1 +
>>  hw/timer/tusb6010.c         |   12 +-
>>  hw/timer/twl92230.c         |   14 +-
>>  hw/timer/xilinx_timer.c     |    1 +
>>  hw/tpm/tpm_tis.c            |    1 +
>>  hw/usb/hcd-ehci.c           |   10 +-
>>  hw/usb/hcd-musb.c           |    6 +-
>>  hw/usb/hcd-ohci.c           |   12 +-
>>  hw/usb/hcd-uhci.c           |   15 +-
>>  hw/usb/hcd-xhci.c           |   26 +-
>>  hw/usb/host-libusb.c        |    6 +-
>>  hw/usb/host-linux.c         |    6 +-
>>  hw/usb/redirect.c           |   12 +-
>>  hw/virtio/virtio-balloon.c  |    8 +-
>>  hw/virtio/virtio-rng.c      |   14 +-
>>  hw/watchdog/wdt_i6300esb.c  |    6 +-
>>  hw/watchdog/wdt_ib700.c     |   10 +-
>>  hw/xtensa/pic_cpu.c         |   10 +-
>>  include/block/aio.h         |   23 ++
>>  include/block/block_int.h   |    1 +
>>  include/block/blockjob.h    |    2 +-
>>  include/block/coroutine.h   |    4 +-
>>  include/hw/acpi/acpi.h      |    2 +-
>>  include/qemu/ratelimit.h    |    2 +-
>>  include/qemu/timer.h        |  793 ++++++++++++++++++++++++++++++++++++++---
>>  include/sysemu/sysemu.h     |    2 +-
>>  main-loop.c                 |   51 ++-
>>  migration-exec.c            |    1 +
>>  migration-fd.c              |    1 +
>>  migration-tcp.c             |    1 +
>>  migration-unix.c            |    1 +
>>  migration.c                 |   17 +-
>>  monitor.c                   |    8 +-
>>  nbd.c                       |    1 +
>>  net/dump.c                  |    2 +-
>>  net/net.c                   |    1 +
>>  net/socket.c                |    1 +
>>  pc-bios/slof.bin            |  Bin 909720 -> 909720 bytes
>>  qemu-char.c                 |    2 +-
>>  qemu-coroutine-io.c         |    1 +
>>  qemu-coroutine-sleep.c      |   10 +-
>>  qemu-io-cmds.c              |    1 +
>>  qemu-nbd.c                  |    1 +
>>  qemu-timer.c                |  826 
>> +++++++++++++++----------------------------
>>  qtest.c                     |   10 +-
>>  savevm.c                    |   22 +-
>>  scripts/switch-timer-api    |  178 ++++++++++
>>  slirp/if.c                  |    2 +-
>>  slirp/misc.c                |    1 +
>>  slirp/slirp.c               |    4 +-
>>  stubs/clock-warp.c          |    2 +-
>>  target-alpha/sys_helper.c   |   12 +-
>>  target-ppc/kvm.c            |    8 +-
>>  target-ppc/kvm_ppc.c        |    6 +-
>>  target-s390x/cpu.c          |    4 +-
>>  target-s390x/misc_helper.c  |    6 +-
>>  target-xtensa/op_helper.c   |    2 +-
>>  tests/libqtest.h            |   24 +-
>>  tests/test-aio.c            |  143 +++++++-
>>  tests/test-thread-pool.c    |    3 +
>>  thread-pool.c               |    1 +
>>  ui/console.c                |   30 +-
>>  ui/input.c                  |    6 +-
>>  ui/spice-core.c             |   10 +-
>>  ui/vnc-auth-sasl.h          |    1 +
>>  ui/vnc-auth-vencrypt.c      |    2 +-
>>  ui/vnc-ws.c                 |    1 +
>>  vl.c                        |   14 +-
>>  xen-all.c                   |   12 +-
>>  172 files changed, 2370 insertions(+), 1432 deletions(-)
>>  create mode 100755 scripts/switch-timer-api
>>
>
> Do you have this in git somewhere? I'd like to port my (almost) BQL-free
> threaded RTC device model on top to check how well the new API works.
> But it looks promising.
>
Hi Jan, do you work on pushing hpet onto dedicated thread? If you do,
I will cease my current work.

Thanks,
Pingfan



reply via email to

[Prev in Thread] Current Thread [Next in Thread]