[Qemu-devel] [PATCH 09/66] vt82c686: replace register_ioport*

[Paolo Bonzini]

From: Jan Kiszka <address@hidden>

Convert over to memory regions to obsolete register_ioport*.

Signed-off-by: Jan Kiszka <address@hidden>
Signed-off-by: Paolo Bonzini <address@hidden>
---
 hw/isa/vt82c686.c | 40 ++++++++++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 14 deletions(-)

diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index 391d90d..e5cd4cd 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -43,10 +43,12 @@ typedef struct SuperIOConfig
 
 typedef struct VT82C686BState {
     PCIDevice dev;
+    MemoryRegion superio;
     SuperIOConfig superio_conf;
 } VT82C686BState;
 
-static void superio_ioport_writeb(void *opaque, uint32_t addr, uint32_t data)
+static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
+                                  unsigned size)
 {
     int can_write;
     SuperIOConfig *superio_conf = opaque;
@@ -93,7 +95,7 @@ static void superio_ioport_writeb(void *opaque, uint32_t 
addr, uint32_t data)
     }
 }
 
-static uint32_t superio_ioport_readb(void *opaque, uint32_t addr)
+static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
 {
     SuperIOConfig *superio_conf = opaque;
 
@@ -101,6 +103,16 @@ static uint32_t superio_ioport_readb(void *opaque, 
uint32_t addr)
     return (superio_conf->config[superio_conf->index]);
 }
 
+static const MemoryRegionOps superio_ops = {
+    .read = superio_ioport_readb,
+    .write = superio_ioport_writeb,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 1,
+    },
+};
+
 static void vt82c686b_reset(void * opaque)
 {
     PCIDevice *d = opaque;
@@ -140,17 +152,7 @@ static void vt82c686b_write_config(PCIDevice * d, uint32_t 
address,
 
     pci_default_write_config(d, address, val, len);
     if (address == 0x85) {  /* enable or disable super IO configure */
-        if (val & 0x2) {
-            /* floppy also uses 0x3f0 and 0x3f1.
-             * But we do not emulate flopy,so just set it here. */
-            isa_unassign_ioport(0x3f0, 2);
-            register_ioport_read(0x3f0, 2, 1, superio_ioport_readb,
-                                 &vt686->superio_conf);
-            register_ioport_write(0x3f0, 2, 1, superio_ioport_writeb,
-                                  &vt686->superio_conf);
-        } else {
-            isa_unassign_ioport(0x3f0, 2);
-        }
+        memory_region_set_enabled(&vt686->superio, val & 0x2);
     }
 }
 
@@ -423,11 +425,13 @@ static const VMStateDescription vmstate_via = {
 /* init the PCI-to-ISA bridge */
 static int vt82c686b_initfn(PCIDevice *d)
 {
+    VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
     uint8_t *pci_conf;
+    ISABus *isa_bus;
     uint8_t *wmask;
     int i;
 
-    isa_bus_new(&d->qdev, pci_address_space_io(d));
+    isa_bus = isa_bus_new(&d->qdev, pci_address_space_io(d));
 
     pci_conf = d->config;
     pci_config_set_prog_interface(pci_conf, 0x0);
@@ -439,6 +443,14 @@ static int vt82c686b_initfn(PCIDevice *d)
        }
     }
 
+    memory_region_init_io(&vt82c->superio, &superio_ops, &vt82c->superio_conf,
+                          "superio", 2);
+    memory_region_set_enabled(&vt82c->superio, false);
+    /* The floppy also uses 0x3f0 and 0x3f1.
+     * But we do not emulate a floppy, so just set it here. */
+    memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
+                                &vt82c->superio);
+
     qemu_register_reset(vt82c686b_reset, d);
 
     return 0;
-- 
1.8.1.4