[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 2/2] display: stop using DT_NOGRAPHIC, use DT_NON
From: |
Michael Tokarev |
Subject: |
[Qemu-devel] [PATCH v2 2/2] display: stop using DT_NOGRAPHIC, use DT_NONE |
Date: |
Wed, 3 Jul 2013 10:44:34 +0400 |
It looks like initially there was -nographic option to turn
off display, now there's another option of the same sort,
-display none. But code in other places of qemu checks for
DT_NOGRAPHIC and does not work well with -display none.
Make DT_NOGRAPHIC an internal version which selects DT_NONE,
and check for that in all other places where previously we
checked for DT_NOGRAPHIC.
While at it, rename two private variants of display (DT_DEFAULT
and DT_NOGRAPHIC) to use two underscores and make them negative,
and set DT_NONE to 0.
This should fix the issue of non-working sun serial console
with the suggested replacement of -nographic which is
-display none.
Cc: Todd T. Fries <address@hidden>
Signed-off-by: Michael Tokarev <address@hidden>
---
V2:
- do not touch qemu-char, fixed differently as suggested by pbonzini
- a bit more explicit comments about private DT__* constants
- documentation additions and fixes to describe actual reality
hw/lm32/milkymist-hw.h | 2 +-
hw/nvram/fw_cfg.c | 2 +-
hw/sparc/sun4m.c | 2 +-
include/sysemu/sysemu.h | 6 +++---
qemu-options.hx | 12 ++++++++++--
vl.c | 15 +++++++--------
6 files changed, 23 insertions(+), 16 deletions(-)
diff --git a/hw/lm32/milkymist-hw.h b/hw/lm32/milkymist-hw.h
index 5317ce6..59af720 100644
--- a/hw/lm32/milkymist-hw.h
+++ b/hw/lm32/milkymist-hw.h
@@ -107,7 +107,7 @@ static inline DeviceState *milkymist_tmu2_create(hwaddr
base,
int nelements;
int ver_major, ver_minor;
- if (display_type == DT_NOGRAPHIC) {
+ if (display_type == DT_NONE) {
return NULL;
}
diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c
index 3c255ce..b3d163a 100644
--- a/hw/nvram/fw_cfg.c
+++ b/hw/nvram/fw_cfg.c
@@ -510,7 +510,7 @@ FWCfgState *fw_cfg_init(uint32_t ctl_port, uint32_t
data_port,
}
fw_cfg_add_bytes(s, FW_CFG_SIGNATURE, (char *)"QEMU", 4);
fw_cfg_add_bytes(s, FW_CFG_UUID, qemu_uuid, 16);
- fw_cfg_add_i16(s, FW_CFG_NOGRAPHIC, (uint16_t)(display_type ==
DT_NOGRAPHIC));
+ fw_cfg_add_i16(s, FW_CFG_NOGRAPHIC, (uint16_t)(display_type == DT_NONE));
fw_cfg_add_i16(s, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(s, FW_CFG_BOOT_MENU, (uint16_t)boot_menu);
fw_cfg_bootsplash(s);
diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c
index 0e86ca7..c1d42ec 100644
--- a/hw/sparc/sun4m.c
+++ b/hw/sparc/sun4m.c
@@ -919,7 +919,7 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
ram_addr_t RAM_size,
slavio_timer_init_all(hwdef->counter_base, slavio_irq[19], slavio_cpu_irq,
smp_cpus);
slavio_serial_ms_kbd_init(hwdef->ms_kb_base, slavio_irq[14],
- display_type == DT_NOGRAPHIC, ESCC_CLOCK, 1);
+ display_type == DT_NONE, ESCC_CLOCK, 1);
/* Slavio TTYA (base+4, Linux ttyS0) is the first QEMU serial device
Slavio TTYB (base+0, Linux ttyS1) is the second QEMU serial device */
escc_init(hwdef->serial_base, slavio_irq[15], slavio_irq[15],
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 2fb71af..d1b7bd7 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -87,12 +87,12 @@ void do_info_slirp(Monitor *mon);
typedef enum DisplayType
{
- DT_DEFAULT,
+ DT__DEFAULT = -1, /* used internally in vl.c */
+ DT__NOGRAPHIC = -2, /* used internally in vl.c */
+ DT_NONE = 0,
DT_CURSES,
DT_SDL,
DT_GTK,
- DT_NOGRAPHIC,
- DT_NONE,
} DisplayType;
extern int autostart;
diff --git a/qemu-options.hx b/qemu-options.hx
index d676b03..4669138 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -825,7 +825,11 @@ a text mode. Generally only the VGA device models support
text mode.
@item none
Do not display video output. The guest will still see an emulated
graphics card, but its output will not be displayed to the QEMU
-user. This option differs from the -nographic option in that it
+user. The fact that we have no display is passed to firmware and
+affects a few other places depending on the target architecture,
+like switching console output to serial console or disabling keyboard
+input.
+This option differs from the -nographic option in that it
only affects what is done with video output; -nographic also changes
the destination of the serial and parallel port data.
@item vnc
@@ -844,7 +848,11 @@ you can totally disable graphical output so that QEMU is a
simple
command line application. The emulated serial port is redirected on
the console and muxed with the monitor (unless redirected elsewhere
explicitly). Therefore, you can still use QEMU to debug a Linux kernel
-with a serial console.
+with a serial console. This option is equivalent for
address@hidden
+-display none -serial mon:stdio -parallel none
address@hidden example
+unless serial, parallel and/or monitor were also specified.
ETEXI
DEF("curses", 0, QEMU_OPTION_curses,
diff --git a/vl.c b/vl.c
index 6d9fd7d..98d3e62 100644
--- a/vl.c
+++ b/vl.c
@@ -183,7 +183,7 @@ static const char *data_dir[16];
static int data_dir_idx;
const char *bios_name = NULL;
enum vga_retrace_method vga_retrace_method = VGA_RETRACE_DUMB;
-DisplayType display_type = DT_DEFAULT;
+DisplayType display_type = DT__DEFAULT;
static int display_remote;
const char* keyboard_layout = NULL;
ram_addr_t ram_size;
@@ -2183,7 +2183,7 @@ static void select_vgahw (const char *p)
static DisplayType select_display(const char *p)
{
const char *opts;
- DisplayType display = DT_DEFAULT;
+ DisplayType display = DT__DEFAULT;
if (strstart(p, "sdl", &opts)) {
#ifdef CONFIG_SDL
@@ -3125,7 +3125,7 @@ int main(int argc, char **argv, char **envp)
display_type = select_display(optarg);
break;
case QEMU_OPTION_nographic:
- display_type = DT_NOGRAPHIC;
+ display_type = DT__NOGRAPHIC;
break;
case QEMU_OPTION_curses:
#ifdef CONFIG_CURSES
@@ -3971,7 +3971,7 @@ int main(int argc, char **argv, char **envp)
* -nographic _and_ redirects all ports explicitly - this is valid
* usage, -nographic is just a no-op in this case.
*/
- if (display_type == DT_NOGRAPHIC
+ if (display_type == DT__NOGRAPHIC
&& (default_parallel || default_serial
|| default_monitor || default_virtcon)) {
fprintf(stderr, "-nographic can not be used with -daemonize\n");
@@ -3985,7 +3985,8 @@ int main(int argc, char **argv, char **envp)
#endif
}
- if (display_type == DT_NOGRAPHIC) {
+ if (display_type == DT__NOGRAPHIC) {
+ display_type = DT_NONE;
if (default_parallel)
add_device_config(DEV_PARALLEL, "null");
if (default_serial && default_monitor) {
@@ -4019,7 +4020,7 @@ int main(int argc, char **argv, char **envp)
}
}
- if (display_type == DT_DEFAULT && !display_remote) {
+ if (display_type == DT__DEFAULT && !display_remote) {
#if defined(CONFIG_GTK)
display_type = DT_GTK;
#elif defined(CONFIG_SDL) || defined(CONFIG_COCOA)
@@ -4309,8 +4310,6 @@ int main(int argc, char **argv, char **envp)
/* init local displays */
switch (display_type) {
- case DT_NOGRAPHIC:
- break;
#if defined(CONFIG_CURSES)
case DT_CURSES:
curses_display_init(ds, full_screen);
--
1.7.10.4