[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 3/7] target-arm: mark up cpregs for no-migrate or ra
|
From: |
Peter Maydell |
|
Subject: |
[Qemu-devel] [PATCH 3/7] target-arm: mark up cpregs for no-migrate or raw access |
|
Date: |
Fri, 17 May 2013 14:23:53 +0100 |
Mark up coprocessor register definitions to add raw access
functions or mark the register as non-migratable where necessary.
Signed-off-by: Peter Maydell <address@hidden>
---
target-arm/helper.c | 94 ++++++++++++++++++++++++++++++++++-----------------
1 file changed, 63 insertions(+), 31 deletions(-)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 2585d59..e5e4ed2 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -155,13 +155,17 @@ static const ARMCPRegInfo cp_reginfo[] = {
* the unified TLB ops but also the dside/iside/inner-shareable variants.
*/
{ .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY,
- .opc1 = CP_ANY, .opc2 = 0, .access = PL1_W, .writefn = tlbiall_write, },
+ .opc1 = CP_ANY, .opc2 = 0, .access = PL1_W, .writefn = tlbiall_write,
+ .type = ARM_CP_NO_MIGRATE },
{ .name = "TLBIMVA", .cp = 15, .crn = 8, .crm = CP_ANY,
- .opc1 = CP_ANY, .opc2 = 1, .access = PL1_W, .writefn = tlbimva_write, },
+ .opc1 = CP_ANY, .opc2 = 1, .access = PL1_W, .writefn = tlbimva_write,
+ .type = ARM_CP_NO_MIGRATE },
{ .name = "TLBIASID", .cp = 15, .crn = 8, .crm = CP_ANY,
- .opc1 = CP_ANY, .opc2 = 2, .access = PL1_W, .writefn = tlbiasid_write, },
+ .opc1 = CP_ANY, .opc2 = 2, .access = PL1_W, .writefn = tlbiasid_write,
+ .type = ARM_CP_NO_MIGRATE },
{ .name = "TLBIMVAA", .cp = 15, .crn = 8, .crm = CP_ANY,
- .opc1 = CP_ANY, .opc2 = 3, .access = PL1_W, .writefn = tlbimvaa_write, },
+ .opc1 = CP_ANY, .opc2 = 3, .access = PL1_W, .writefn = tlbimvaa_write,
+ .type = ARM_CP_NO_MIGRATE },
/* Cache maintenance ops; some of this space may be overridden later. */
{ .name = "CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
.opc1 = 0, .opc2 = CP_ANY, .access = PL1_W,
@@ -196,7 +200,8 @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = {
.resetvalue = 0 },
/* v6 doesn't have the cache ID registers but Linux reads them anyway */
{ .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY,
- .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
+ .resetvalue = 0 },
REGINFO_SENTINEL
};
@@ -235,6 +240,21 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
REGINFO_SENTINEL
};
+
+static int raw_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ *value = CPREG_FIELD32(env, ri);
+ return 0;
+}
+
+static int raw_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ CPREG_FIELD32(env, ri) = value;
+ return 0;
+}
+
static int pmreg_read(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t *value)
{
@@ -366,13 +386,16 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
{ .name = "PMCNTENSET", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 =
1,
.access = PL0_RW, .resetvalue = 0,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten),
- .readfn = pmreg_read, .writefn = pmcntenset_write },
+ .readfn = pmreg_read, .writefn = pmcntenset_write,
+ .raw_readfn = raw_read, .raw_writefn = raw_write },
{ .name = "PMCNTENCLR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 =
2,
.access = PL0_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten),
- .readfn = pmreg_read, .writefn = pmcntenclr_write },
+ .readfn = pmreg_read, .writefn = pmcntenclr_write,
+ .type = ARM_CP_NO_MIGRATE },
{ .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3,
.access = PL0_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
- .readfn = pmreg_read, .writefn = pmovsr_write },
+ .readfn = pmreg_read, .writefn = pmovsr_write,
+ .raw_readfn = raw_read, .raw_writefn = raw_write },
/* Unimplemented so WI. Strictly speaking write accesses in PL0 should
* respect PMUSERENR.
*/
@@ -389,7 +412,8 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
{ .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 =
1,
.access = PL0_RW,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmxevtyper),
- .readfn = pmreg_read, .writefn = pmxevtyper_write },
+ .readfn = pmreg_read, .writefn = pmxevtyper_write,
+ .raw_readfn = raw_read, .raw_writefn = raw_write },
/* Unimplemented, RAZ/WI. XXX PMUSERENR */
{ .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2,
.access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
@@ -397,22 +421,21 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
.access = PL0_R | PL1_RW,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
.resetvalue = 0,
- .writefn = pmuserenr_write },
+ .writefn = pmuserenr_write, .raw_writefn = raw_write },
{ .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 =
1,
.access = PL1_RW,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
.resetvalue = 0,
- .writefn = pmintenset_write },
+ .writefn = pmintenset_write, .raw_writefn = raw_write },
{ .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 =
2,
- .access = PL1_RW,
+ .access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
- .resetvalue = 0,
- .writefn = pmintenclr_write },
+ .resetvalue = 0, .writefn = pmintenclr_write, },
{ .name = "SCR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 0,
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_scr),
.resetvalue = 0, },
{ .name = "CCSIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0,
- .access = PL1_R, .readfn = ccsidr_read },
+ .access = PL1_R, .readfn = ccsidr_read, .type = ARM_CP_NO_MIGRATE },
{ .name = "CSSELR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0,
.access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c0_cssel),
.writefn = csselr_write, .resetvalue = 0 },
@@ -461,7 +484,7 @@ static const ARMCPRegInfo t2ee_cp_reginfo[] = {
.writefn = teecr_write },
{ .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
.access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr),
- .resetvalue = 0,
+ .resetvalue = 0, .raw_readfn = raw_read, .raw_writefn = raw_write,
.readfn = teehbr_read, .writefn = teehbr_write },
REGINFO_SENTINEL
};
@@ -486,7 +509,8 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
/* Dummy implementation: RAZ/WI the whole crn=14 space */
{ .name = "GENERIC_TIMER", .cp = 15, .crn = 14,
.crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
- .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
+ .resetvalue = 0 },
REGINFO_SENTINEL
};
@@ -579,7 +603,7 @@ static const ARMCPRegInfo vapa_cp_reginfo[] = {
.writefn = par_write },
#ifndef CONFIG_USER_ONLY
{ .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY,
- .access = PL1_W, .writefn = ats_write },
+ .access = PL1_W, .writefn = ats_write, .type = ARM_CP_NO_MIGRATE },
#endif
REGINFO_SENTINEL
};
@@ -664,11 +688,11 @@ static int arm946_prbs_write(CPUARMState *env, const
ARMCPRegInfo *ri,
static const ARMCPRegInfo pmsav5_cp_reginfo[] = {
{ .name = "DATA_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
- .access = PL1_RW,
+ .access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
.fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0,
.readfn = pmsav5_data_ap_read, .writefn = pmsav5_data_ap_write, },
{ .name = "INSN_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
- .access = PL1_RW,
+ .access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
.fieldoffset = offsetof(CPUARMState, cp15.c5_insn), .resetvalue = 0,
.readfn = pmsav5_insn_ap_read, .writefn = pmsav5_insn_ap_write, },
{ .name = "DATA_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 =
2,
@@ -801,6 +825,7 @@ static const ARMCPRegInfo omap_cp_reginfo[] = {
.writefn = omap_threadid_write },
{ .name = "TI925T_STATUS", .cp = 15, .crn = 15,
.crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
+ .type = ARM_CP_NO_MIGRATE,
.readfn = arm_cp_read_zero, .writefn = omap_wfi_write, },
/* TODO: Peripheral port remap register:
* On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller
@@ -808,7 +833,8 @@ static const ARMCPRegInfo omap_cp_reginfo[] = {
* when MMU is off.
*/
{ .name = "OMAP_CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
- .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W, .type = ARM_CP_OVERRIDE,
+ .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W,
+ .type = ARM_CP_OVERRIDE | ARM_CP_NO_MIGRATE,
.writefn = omap_cachemaint_write },
{ .name = "C9", .cp = 15, .crn = 9,
.crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW,
@@ -848,21 +874,24 @@ static const ARMCPRegInfo dummy_c15_cp_reginfo[] = {
*/
{ .name = "C15_IMPDEF", .cp = 15, .crn = 15,
.crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
- .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
+ .resetvalue = 0 },
REGINFO_SENTINEL
};
static const ARMCPRegInfo cache_dirty_status_cp_reginfo[] = {
/* Cache status: RAZ because we have no cache so it's always clean */
{ .name = "CDSR", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 6,
- .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
+ .resetvalue = 0 },
REGINFO_SENTINEL
};
static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = {
/* We never have a a block transfer operation in progress */
{ .name = "BXSR", .cp = 15, .crn = 7, .crm = 12, .opc1 = 0, .opc2 = 4,
- .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
+ .resetvalue = 0 },
/* The cache ops themselves: these all NOP for QEMU */
{ .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0,
.access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
@@ -884,9 +913,11 @@ static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = {
* to indicate that there are no dirty cache lines.
*/
{ .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3,
- .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = (1 << 30) },
+ .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
+ .resetvalue = (1 << 30) },
{ .name = "TCI_DCACHE", .cp = 15, .crn = 7, .crm = 14, .opc1 = 0, .opc2 =
3,
- .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = (1 << 30) },
+ .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
+ .resetvalue = (1 << 30) },
REGINFO_SENTINEL
};
@@ -894,8 +925,8 @@ static const ARMCPRegInfo strongarm_cp_reginfo[] = {
/* Ignore ReadBuffer accesses */
{ .name = "C9_READBUFFER", .cp = 15, .crn = 9,
.crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
- .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_OVERRIDE,
- .resetvalue = 0 },
+ .access = PL1_RW, .resetvalue = 0,
+ .type = ARM_CP_CONST | ARM_CP_OVERRIDE | ARM_CP_NO_MIGRATE },
REGINFO_SENTINEL
};
@@ -921,7 +952,7 @@ static int mpidr_read(CPUARMState *env, const ARMCPRegInfo
*ri,
static const ARMCPRegInfo mpidr_cp_reginfo[] = {
{ .name = "MPIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5,
- .access = PL1_R, .readfn = mpidr_read },
+ .access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_MIGRATE },
REGINFO_SENTINEL
};
@@ -1104,7 +1135,8 @@ void register_cp_regs_for_features(ARMCPU *cpu)
.name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 =
0,
.access = PL0_RW, .resetvalue = cpu->midr & 0xff000000,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
- .readfn = pmreg_read, .writefn = pmcr_write
+ .readfn = pmreg_read, .writefn = pmcr_write,
+ .raw_readfn = raw_read, .raw_writefn = raw_write,
};
ARMCPRegInfo clidr = {
.name = "CLIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 =
1,
@@ -1176,7 +1208,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
{ .name = "MIDR",
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL1_R, .resetvalue = cpu->midr,
- .writefn = arm_cp_write_ignore,
+ .writefn = arm_cp_write_ignore, .raw_writefn = raw_write,
.fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid) },
{ .name = "CTR",
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 1,
--
1.7.9.5
[Qemu-devel] [PATCH 1/7] target-arm: Allow special cpregs to have flags set, Peter Maydell, 2013/05/17
[Qemu-devel] [PATCH 4/7] target-arm: Convert TCG to using (index, value) list for cp migration, Peter Maydell, 2013/05/17
[Qemu-devel] [PATCH 5/7] target-arm: Initialize cpreg list from KVM when using KVM, Peter Maydell, 2013/05/17
Re: [Qemu-devel] [PATCH 0/7] target-arm: cpregs list for migration, kvm reset, Christoffer Dall, 2013/05/31