qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 3/4] uhci: Use an intermediate buffer for usb packet


From: Gerd Hoffmann
Subject: [Qemu-devel] [PATCH 3/4] uhci: Use an intermediate buffer for usb packet data
Date: Tue, 7 May 2013 11:50:06 +0200

From: Hans de Goede <address@hidden>

Due to various unfortunate reasons we cannot reliable detect a guest
cancelling a packet as soon as it happens, instead we detect cancels
with some delay.

When packets are handled async, and we directly pass the guest memory for
the packet to the usb-device as iovec, this means that the usb-device can
write to guest-memory which the guest has already re-used for other purposes
-> not good!

This patch fixes this by adding an intermediate buffer and writing back not
only the result, but also the data, of async completed packets when scanning
the schedule.

Signed-off-by: Hans de Goede <address@hidden>
Signed-off-by: Gerd Hoffmann <address@hidden>
---
 hw/usb/hcd-uhci.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index f8c4286..c85b203 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -119,7 +119,8 @@ struct UHCIPCIDeviceClass {
 
 struct UHCIAsync {
     USBPacket packet;
-    QEMUSGList sgl;
+    uint8_t   static_buf[64]; /* 64 bytes is enough, except for isoc packets */
+    uint8_t   *buf;
     UHCIQueue *queue;
     QTAILQ_ENTRY(UHCIAsync) next;
     uint32_t  td_addr;
@@ -264,7 +265,6 @@ static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, 
uint32_t td_addr)
     async->queue = queue;
     async->td_addr = td_addr;
     usb_packet_init(&async->packet);
-    pci_dma_sglist_init(&async->sgl, &queue->uhci->dev, 1);
     trace_usb_uhci_packet_add(async->queue->token, async->td_addr);
 
     return async;
@@ -274,7 +274,9 @@ static void uhci_async_free(UHCIAsync *async)
 {
     trace_usb_uhci_packet_del(async->queue->token, async->td_addr);
     usb_packet_cleanup(&async->packet);
-    qemu_sglist_destroy(&async->sgl);
+    if (async->buf != async->static_buf) {
+        g_free(async->buf);
+    }
     g_free(async);
 }
 
@@ -299,7 +301,6 @@ static void uhci_async_cancel(UHCIAsync *async)
                                  async->done);
     if (!async->done)
         usb_cancel_packet(&async->packet);
-    usb_packet_unmap(&async->packet, &async->sgl);
     uhci_async_free(async);
 }
 
@@ -774,6 +775,7 @@ static int uhci_complete_td(UHCIState *s, UHCI_TD *td, 
UHCIAsync *async, uint32_
         *int_mask |= 0x01;
 
     if (pid == USB_TOKEN_IN) {
+        pci_dma_write(&s->dev, td->buffer, async->buf, len);
         if ((td->ctrl & TD_CTRL_SPD) && len < max_len) {
             *int_mask |= 0x02;
             /* short packet: do not update QH */
@@ -881,12 +883,17 @@ static int uhci_handle_td(UHCIState *s, UHCIQueue *q, 
uint32_t qh_addr,
     spd = (pid == USB_TOKEN_IN && (td->ctrl & TD_CTRL_SPD) != 0);
     usb_packet_setup(&async->packet, pid, q->ep, 0, td_addr, spd,
                      (td->ctrl & TD_CTRL_IOC) != 0);
-    qemu_sglist_add(&async->sgl, td->buffer, max_len);
-    usb_packet_map(&async->packet, &async->sgl);
+    if (max_len <= sizeof(async->static_buf)) {
+        async->buf = async->static_buf;
+    } else {
+        async->buf = g_malloc(max_len);
+    }
+    usb_packet_addbuf(&async->packet, async->buf, max_len);
 
     switch(pid) {
     case USB_TOKEN_OUT:
     case USB_TOKEN_SETUP:
+        pci_dma_read(&s->dev, td->buffer, async->buf, max_len);
         usb_handle_packet(q->ep->dev, &async->packet);
         if (async->packet.status == USB_RET_SUCCESS) {
             async->packet.actual_length = max_len;
@@ -899,7 +906,6 @@ static int uhci_handle_td(UHCIState *s, UHCIQueue *q, 
uint32_t qh_addr,
 
     default:
         /* invalid pid : frame interrupted */
-        usb_packet_unmap(&async->packet, &async->sgl);
         uhci_async_free(async);
         s->status |= UHCI_STS_HCPERR;
         uhci_update_irq(s);
@@ -916,7 +922,6 @@ static int uhci_handle_td(UHCIState *s, UHCIQueue *q, 
uint32_t qh_addr,
 
 done:
     ret = uhci_complete_td(s, td, async, int_mask);
-    usb_packet_unmap(&async->packet, &async->sgl);
     uhci_async_free(async);
     return ret;
 }
-- 
1.7.9.7




reply via email to

[Prev in Thread] Current Thread [Next in Thread]