[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type
From: |
Alexander Graf |
Subject: |
Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type |
Date: |
Fri, 26 Apr 2013 17:22:08 +0200 |
On 26.04.2013, at 14:12, Dominik Dingel wrote:
> Check for a kernel IPL entry and load kernel image if one was
> specified.
> If no kernel image was supplied and the first boot device
> is not a virtio-ccw-blk device, print error message and exit.
>
> In case it is a virtio-ccw-blk device store the dev_no in reg[7]
I thought we want a boot order, not a singular device to boot off of?
Alex
>
> Signed-off-by: Christian Paro <address@hidden>
> Signed-off-by: Dominik Dingel <address@hidden>
>
> diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
> index ace5ff5..9758529 100644
> --- a/hw/s390x/ipl.c
> +++ b/hw/s390x/ipl.c
> @@ -16,6 +16,8 @@
> #include "elf.h"
> #include "hw/loader.h"
> #include "hw/sysbus.h"
> +#include "hw/s390x/virtio-ccw.h"
> +#include "hw/s390x/css.h"
>
> #define KERN_IMAGE_START 0x010000UL
> #define KERN_PARM_AREA 0x010480UL
> @@ -56,14 +58,25 @@ typedef struct S390IPLState {
> char *firmware;
> } S390IPLState;
>
> +static void s390_ipl_kernel(uint64_t pswaddr)
> +{
> + S390CPU *cpu = S390_CPU(qemu_get_cpu(0));
> + CPUS390XState *env = &cpu->env;
> +
> + env->psw.addr = pswaddr;
> + env->psw.mask = IPL_PSW_MASK;
> + s390_add_running_cpu(cpu);
> +}
>
> -static void s390_ipl_cpu(uint64_t pswaddr)
> +static void s390_ipl_from_disk(VirtIOBlkCcw *dev, uint64_t pswaddr)
> {
> S390CPU *cpu = S390_CPU(qemu_get_cpu(0));
> CPUS390XState *env = &cpu->env;
> + VirtioCcwDevice *ccw_dev = &(dev->parent_obj);
>
> env->psw.addr = pswaddr;
> env->psw.mask = IPL_PSW_MASK;
> + env->regs[7] = ccw_dev->sch->devno;
> s390_add_running_cpu(cpu);
> }
>
> @@ -152,7 +165,18 @@ static void s390_ipl_reset(DeviceState *dev)
> {
> S390IPLState *ipl = S390_IPL(dev);
>
> - s390_ipl_cpu(ipl->start_addr);
> + if (ipl->kernel) {
> + return s390_ipl_kernel(ipl->start_addr);
> + }
> +
> + DeviceState *boot_device = get_boot_device(0);
> + if (object_dynamic_cast(OBJECT(boot_device), TYPE_VIRTIO_BLK) != NULL) {
> + s390_ipl_from_disk(VIRTIO_BLK_CCW(boot_device->parent_obj.parent),
> + ipl->start_addr);
> + } else {
> + fprintf(stderr, "qemu: s390x only supports boot from
> virtio-ccw-blk\n");
> + exit(1);
> + }
> }
>
> static void s390_ipl_class_init(ObjectClass *klass, void *data)
> --
> 1.7.9.5
>
- [Qemu-devel] [PATCH 00/10] S390: Enhance s390 BIOS to enable bootdevice selection, Dominik Dingel, 2013/04/26
- [Qemu-devel] [PATCH 06/10] s390-ccw.img: Enhance drain_irqs()., Dominik Dingel, 2013/04/26
- [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Dominik Dingel, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type,
Alexander Graf <=
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Christian Borntraeger, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Alexander Graf, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Christian Borntraeger, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Alexander Graf, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Dominik Dingel, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Alexander Graf, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Christian Borntraeger, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Alexander Graf, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Anthony Liguori, 2013/04/26
- Re: [Qemu-devel] [PATCH 03/10] S390: Check Bootdevice Type, Dominik Dingel, 2013/04/26