[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3] qemu-log: default to stderr for logging output
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PATCH v3] qemu-log: default to stderr for logging output |
Date: |
Tue, 26 Feb 2013 17:52:40 +0000 |
Switch the default for qemu_log logging output from "/tmp/qemu.log"
to stderr. This is an incompatible change in some sense, but logging
is mostly used for debugging purposes so it shouldn't affect production
use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log"
to the command line.
This change requires us to:
* update all the documentation/help text (we take the opportunity
to smooth out minor inconsistencies between the phrasing in
linux-user/bsd-user/system help messages)
* make linux-user and bsd-user defer to qemu-log for the default
logging destination rather than overriding it themselves
* ensure that all logfile closing is done via qemu_log_close()
and that that function doesn't close stderr
as well as the obvious change to the behaviour of do_qemu_set_log()
when no logfile name has been specified.
Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Stefan Hajnoczi <address@hidden>
Reviewed-by: Markus Armbruster <address@hidden>
---
Changes v2->v3:
* none, just rebased so patch applies cleanly
Changes v1->v2:
* dropped an unnecessary "if (log_file)" check from bsd-user
* standardised the phrasing of the -d and -D help text for
all of bsd-user, linux-user and system mode
NB: if this is applied before the linux-user patch
http://patchwork.ozlabs.org/patch/220481/
then the column formatting in linux-user's --help output will
be slightly misaligned. Not a big deal...
bsd-user/main.c | 18 ++++++++----------
hmp-commands.hx | 4 ++--
include/qemu/log.h | 8 ++++++--
linux-user/main.c | 16 +++++-----------
qemu-doc.texi | 8 ++++----
qemu-log.c | 29 +++++++++++------------------
qemu-options.hx | 10 +++++-----
tcg/tci/README | 2 +-
8 files changed, 42 insertions(+), 53 deletions(-)
diff --git a/bsd-user/main.c b/bsd-user/main.c
index 097fbfe..cc84981 100644
--- a/bsd-user/main.c
+++ b/bsd-user/main.c
@@ -34,8 +34,6 @@
#include "qemu/timer.h"
#include "qemu/envlist.h"
-#define DEBUG_LOGFILE "/tmp/qemu.log"
-
int singlestep;
#if defined(CONFIG_USE_GUEST_BASE)
unsigned long mmap_min_addr;
@@ -691,11 +689,12 @@ static void usage(void)
"-bsd type select emulated BSD type FreeBSD/NetBSD/OpenBSD
(default)\n"
"\n"
"Debug options:\n"
- "-d options activate log (default logfile=%s)\n"
- "-D logfile override default logfile location\n"
- "-p pagesize set the host page size to 'pagesize'\n"
- "-singlestep always run in singlestep mode\n"
- "-strace log system calls\n"
+ "-d item1[,...] enable logging of specified items\n"
+ " (use '-d help' for a list of log items)\n"
+ "-D logfile write logs to 'logfile' (default stderr)\n"
+ "-p pagesize set the host page size to 'pagesize'\n"
+ "-singlestep always run in singlestep mode\n"
+ "-strace log system calls\n"
"\n"
"Environment variables:\n"
"QEMU_STRACE Print system calls and arguments similar to
the\n"
@@ -709,8 +708,7 @@ static void usage(void)
,
TARGET_ARCH,
interp_prefix,
- x86_stack_size,
- DEBUG_LOGFILE);
+ x86_stack_size);
exit(1);
}
@@ -733,7 +731,7 @@ int main(int argc, char **argv)
{
const char *filename;
const char *cpu_model;
- const char *log_file = DEBUG_LOGFILE;
+ const char *log_file = NULL;
const char *log_mask = NULL;
struct target_pt_regs regs1, *regs = ®s1;
struct image_info info1, *info = &info1;
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 64008a9..cef7708 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -295,14 +295,14 @@ ETEXI
.name = "log",
.args_type = "items:s",
.params = "item1[,...]",
- .help = "activate logging of the specified items to
'/tmp/qemu.log'",
+ .help = "activate logging of the specified items",
.mhandler.cmd = do_log,
},
STEXI
@item log @var{item1}[,...]
@findex log
-Activate logging of the specified items to @file{/tmp/qemu.log}.
+Activate logging of the specified items.
ETEXI
{
diff --git a/include/qemu/log.h b/include/qemu/log.h
index 4527003..6b0db02 100644
--- a/include/qemu/log.h
+++ b/include/qemu/log.h
@@ -116,8 +116,12 @@ static inline void qemu_log_flush(void)
/* Close the log file */
static inline void qemu_log_close(void)
{
- fclose(qemu_logfile);
- qemu_logfile = NULL;
+ if (qemu_logfile) {
+ if (qemu_logfile != stderr) {
+ fclose(qemu_logfile);
+ }
+ qemu_logfile = NULL;
+ }
}
/* Set up a new log file */
diff --git a/linux-user/main.c b/linux-user/main.c
index e515684..29845f9 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -35,8 +35,6 @@
#include "qemu/envlist.h"
#include "elf.h"
-#define DEBUG_LOGFILE "/tmp/qemu.log"
-
char *exec_path;
int singlestep;
@@ -3296,9 +3294,10 @@ static const struct qemu_argument arg_table[] = {
"size", "reserve 'size' bytes for guest virtual address space"},
#endif
{"d", "QEMU_LOG", true, handle_arg_log,
- "options", "activate log"},
+ "item[,...]", "enable logging of specified items "
+ "(use '-d help' for a list of items)"},
{"D", "QEMU_LOG_FILENAME", true, handle_arg_log_filename,
- "logfile", "override default logfile location"},
+ "logfile", "write logs to 'logfile' (default stderr)"},
{"p", "QEMU_PAGESIZE", true, handle_arg_pagesize,
"pagesize", "set the host page size to 'pagesize'"},
{"singlestep", "QEMU_SINGLESTEP", false, handle_arg_singlestep,
@@ -3351,11 +3350,9 @@ static void usage(void)
printf("\n"
"Defaults:\n"
"QEMU_LD_PREFIX = %s\n"
- "QEMU_STACK_SIZE = %ld byte\n"
- "QEMU_LOG = %s\n",
+ "QEMU_STACK_SIZE = %ld byte\n",
interp_prefix,
- guest_stack_size,
- DEBUG_LOGFILE);
+ guest_stack_size);
printf("\n"
"You can use -E and -U options or the QEMU_SET_ENV and\n"
@@ -3439,7 +3436,6 @@ static int parse_args(int argc, char **argv)
int main(int argc, char **argv, char **envp)
{
- const char *log_file = DEBUG_LOGFILE;
struct target_pt_regs regs1, *regs = ®s1;
struct image_info info1, *info = &info1;
struct linux_binprm bprm;
@@ -3482,8 +3478,6 @@ int main(int argc, char **argv, char **envp)
cpudef_setup(); /* parse cpu definitions in target config file (TBD) */
#endif
- /* init debug */
- qemu_set_log_filename(log_file);
optind = parse_args(argc, argv);
/* Zero out regs */
diff --git a/qemu-doc.texi b/qemu-doc.texi
index 6d7f50d..747e052 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -2642,8 +2642,8 @@ Pre-allocate a guest virtual address space of the given
size (in bytes).
Debug options:
@table @option
address@hidden -d
-Activate log (logfile=/tmp/qemu.log)
address@hidden -d item1,...
+Activate logging of the specified items (use '-d help' for a list of log items)
@item -p pagesize
Act as if the host page size was 'pagesize' bytes
@item -g port
@@ -2781,8 +2781,8 @@ FreeBSD, NetBSD and OpenBSD (default).
Debug options:
@table @option
address@hidden -d
-Activate log (logfile=/tmp/qemu.log)
address@hidden -d item1,...
+Activate logging of the specified items (use '-d help' for a list of log items)
@item -p pagesize
Act as if the host page size was 'pagesize' bytes
@item -singlestep
diff --git a/qemu-log.c b/qemu-log.c
index 2f47aaf..797f2af 100644
--- a/qemu-log.c
+++ b/qemu-log.c
@@ -20,12 +20,6 @@
#include "qemu-common.h"
#include "qemu/log.h"
-#ifdef WIN32
-#define DEFAULT_LOGFILENAME "qemu.log"
-#else
-#define DEFAULT_LOGFILENAME "/tmp/qemu.log"
-#endif
-
static char *logfilename;
FILE *qemu_logfile;
int qemu_loglevel;
@@ -56,14 +50,17 @@ void qemu_log_mask(int mask, const char *fmt, ...)
/* enable or disable low levels log */
void do_qemu_set_log(int log_flags, bool use_own_buffers)
{
- const char *fname = logfilename ?: DEFAULT_LOGFILENAME;
-
qemu_loglevel = log_flags;
if (qemu_loglevel && !qemu_logfile) {
- qemu_logfile = fopen(fname, log_append ? "a" : "w");
- if (!qemu_logfile) {
- perror(fname);
- _exit(1);
+ if (logfilename) {
+ qemu_logfile = fopen(logfilename, log_append ? "a" : "w");
+ if (!qemu_logfile) {
+ perror(logfilename);
+ _exit(1);
+ }
+ } else {
+ /* Default to stderr if no log file specified */
+ qemu_logfile = stderr;
}
/* must avoid mmap() usage of glibc by setting a buffer "by hand" */
if (use_own_buffers) {
@@ -81,8 +78,7 @@ void do_qemu_set_log(int log_flags, bool use_own_buffers)
}
}
if (!qemu_loglevel && qemu_logfile) {
- fclose(qemu_logfile);
- qemu_logfile = NULL;
+ qemu_log_close();
}
}
@@ -90,10 +86,7 @@ void qemu_set_log_filename(const char *filename)
{
g_free(logfilename);
logfilename = g_strdup(filename);
- if (qemu_logfile) {
- fclose(qemu_logfile);
- qemu_logfile = NULL;
- }
+ qemu_log_close();
qemu_set_log(qemu_loglevel);
}
diff --git a/qemu-options.hx b/qemu-options.hx
index 2832d82..2b70432 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2515,21 +2515,21 @@ Shorthand for -gdb tcp::1234, i.e. open a gdbserver on
TCP port 1234
ETEXI
DEF("d", HAS_ARG, QEMU_OPTION_d, \
- "-d item1,... output log to /tmp/qemu.log (use '-d help' for a list of
log items)\n",
+ "-d item1,... enable logging of specified items (use '-d help' for a
list of log items)\n",
QEMU_ARCH_ALL)
STEXI
address@hidden -d
address@hidden -d @var{item1}[,...]
@findex -d
-Output log in /tmp/qemu.log
+Enable logging of specified items. Use '-d help' for a list of log items.
ETEXI
DEF("D", HAS_ARG, QEMU_OPTION_D, \
- "-D logfile output log to logfile (instead of the default
/tmp/qemu.log)\n",
+ "-D logfile output log to logfile (default stderr)\n",
QEMU_ARCH_ALL)
STEXI
@item -D @var{logfile}
@findex -D
-Output log in @var{logfile} instead of /tmp/qemu.log
+Output log in @var{logfile} instead of to stderr
ETEXI
DEF("L", HAS_ARG, QEMU_OPTION_L, \
diff --git a/tcg/tci/README b/tcg/tci/README
index 6ac1ac9..dc57f07 100644
--- a/tcg/tci/README
+++ b/tcg/tci/README
@@ -52,7 +52,7 @@ The only difference from running QEMU with TCI to running
without TCI
should be speed. Especially during development of TCI, it was very
useful to compare runs with and without TCI. Create /tmp/qemu.log by
- qemu-system-i386 -d in_asm,op_opt,cpu -singlestep
+ qemu-system-i386 -d in_asm,op_opt,cpu -D /tmp/qemu.log -singlestep
once with interpreter and once without interpreter and compare the resulting
qemu.log files. This is also useful to see the effects of additional
--
1.7.9.5
- [Qemu-devel] [PATCH v3] qemu-log: default to stderr for logging output,
Peter Maydell <=