[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1031698] Re: Missing PPC TRACE exception on a branch
From: |
Michael Tokarev |
Subject: |
[Qemu-devel] [Bug 1031698] Re: Missing PPC TRACE exception on a branch |
Date: |
Sun, 16 Dec 2012 11:10:27 -0000 |
This is fixed by qemu commit f0cc4aa8450376ca2aee3ebb09db71f9f2ff333b
which went into qemu-1.3 release.
** Changed in: qemu
Status: New => Fix Committed
** Changed in: qemu
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1031698
Title:
Missing PPC TRACE exception on a branch
Status in QEMU:
Fix Released
Bug description:
I am using qemu-1.1.1-1 to emulate a PPC PREP machine on intel host
linux ubuntu 11-10
In the following example, i will show that the POWERPC TRACE exception
at vector 0xD00 is not taken when executing a specific kind of branch.
I have the following stand-alone assembly source code for powerpc in file
SE_TEST.s
.text
.global _start
_start:
/* copy vector handler at address 0xD00 */
addis 3,0,(0xD00)@ha
addi 3,3,(0xD00)@l
addis 4,0,(vector_handler)@ha
addi 4,4,(vector_handler)@l
addi 3,3,-4
addi 4,4,-4
lwzu 7,4(4)
stwu 7,4(3)
lwzu 7,4(4)
stwu 7,4(3)
lwzu 7,4(4)
stwu 7,4(3)
lwzu 7,4(4)
stwu 7,4(3)
/* set branch address in SRR0 register */
addis 3,0,(branch)@ha
addi 3,3,(branch)@l
mtspr 26,3
/* Read MSR */
/* Set SE bit and clear IP bit then set value in SSR1 */
mfmsr 4
ori 4,4,0x0400
andi. 4,4,0xFFBF
mtspr 27,4
/* Set CR condition to execute not taken branch after rfi */
addi 5,0,0
cmpi 0,5,0
rfi
nop
nop
nop
branch:
bne down <- branch where the error is.
branch_plus_1:
nop
branch_plus_2:
nop
down: nop
nop
nop
nop
vector_handler:
mfspr 6,26
nop
nop
nop
It compiles with powerpc-eabi-gcc SE_TEST.s -o SE_TEST.elf
Then I run Qemu with the command : "./qemu-system-ppc -M prep -s -S"
Then i run a cross gdb with the command: "powerpc-eabi-gdb --nx"
On gdb prompt i execute the following gdb command :
file SE_TEST.elf
target remote :1234
load SE_TEST.elf
set $pc =_start
b *0xD08
c
echo "srr0 value in trace handler "
p/x $r6
echo "address of branch_plus_1 "
p/x &branch_plus_1
echo "address of branch_plus_2 "
p/x &branch_plus_2
The gdb command windows display the result:
(gdb) so co
0xfffffffc in ?? ()
Loading section .init, size 0x24 lma 0x1800074
Loading section .text, size 0x26c lma 0x1800098
Loading section .fini, size 0x20 lma 0x1800304
Loading section .eh_frame, size 0x8 lma 0x1810324
Loading section .ctors, size 0x8 lma 0x181032c
Loading section .dtors, size 0x8 lma 0x1810334
Loading section .jcr, size 0x4 lma 0x181033c
Loading section .data, size 0x4 lma 0x1810340
Start address 0x1800200, load size 720
Transfer rate: 5760 bits in <1 sec, 90 bytes/write.
Breakpoint 1 at 0xd08
Breakpoint 1, 0x00000d08 in ?? ()
"srr0 value in trace handler "$1 = 0x1800274
"address of branch_plus_1 "$2 = 0x1800270
"address of branch_plus_2 "$3 = 0x1800274
In trace exception handler, the SRR0 register value should be the value of
address just following the branch id 0x1800270.
But it is not the case, the SRR0 value is the address of the next next
instruction after the branch instruction.
It seems that the singlestep exception was not taken after executing
the "bne down" instruction but was taken after executing the first
following nop instruction.
I have make some other test with other kind of branch, the behaviour
is correct and only for a conditionnal branch when it is not taken
with issue appears.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1031698/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [Bug 1031698] Re: Missing PPC TRACE exception on a branch,
Michael Tokarev <=