[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH V17 1/6] docs: document for add-cow file format
From: |
Kevin Wolf |
Subject: |
Re: [Qemu-devel] [PATCH V17 1/6] docs: document for add-cow file format |
Date: |
Mon, 10 Dec 2012 16:39:32 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:13.0) Gecko/20120605 Thunderbird/13.0 |
Am 06.12.2012 07:51, schrieb Dong Xu Wang:
> Document for add-cow format, the usage and spec of add-cow are introduced.
>
> Signed-off-by: Dong Xu Wang <address@hidden>
> ---
> docs/specs/add-cow.txt | 154
> ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 154 insertions(+), 0 deletions(-)
> create mode 100644 docs/specs/add-cow.txt
>
> diff --git a/docs/specs/add-cow.txt b/docs/specs/add-cow.txt
> new file mode 100644
> index 0000000..24e9a11
> --- /dev/null
> +++ b/docs/specs/add-cow.txt
> @@ -0,0 +1,154 @@
> +== General ==
> +
> +The raw file format does not support backing files or copy on write feature.
> +The add-cow image format makes it possible to use backing files with a raw
> +image by keeping a separate .add-cow metadata file. Once all sectors
> +have been written into the raw image it is safe to discard the .add-cow
> +and backing files, then we can use the raw image directly.
> +
> +An example usage of add-cow would look like::
Double colon.
> +(ubuntu.img is a disk image which has an installed OS.)
> + 1) Create a raw image with the same size of ubuntu.img
> + qemu-img create -f raw test.raw 8G
> + 2) Create an add-cow image which will store dirty bitmap
> + qemu-img create -f add-cow test.add-cow \
> + -o backing_file=ubuntu.img,image_file=test.raw
> + 3) Run qemu with add-cow image
> + qemu -drive if=virtio,file=test.add-cow
> +
> +test.raw may be larger than ubuntu.img, in that case, the size of
> test.add-cow
> +will be calculated from the size of test.raw.
> +
> +image_fmt can be omitted, in that case image_fmt should be set as "raw".
By "should be set as" you mean "is assumed to be"?
> +backing_fmt can also be omitted, add-cow should do a probe operation and
> determine
This line takes more than 80 characters. More follow, I won't comment on
each.
> +what the backing file's format is.
> +
> +=Specification=
> +
> +The file format looks like this:
> +
> + +---------------+-------------------------------+
> + | Header | COW bitmap |
> + +---------------+-------------------------------+
> +
> +All numbers in add-cow are stored in Little Endian byte order.
> +
> +== Header ==
> +
> +The Header is included in the first bytes:
> +(HEADER_SIZE is defined in 44-47 bytes.)
> + Byte 0 - 3: magic
> + add-cow magic string ("ACOW").
> +
> + 4 - 7: version
> + Version number (only valid value is 1 now).
> +
> + 8 - 11: backing file name offset
> + Offset in the add-cow file at which the backing file
> + name is stored (NB: The string is not
> NUL-terminated).
> + If backing file name does NOT exist, this field will
> be
> + 0. Must be between 80 and [HEADER_SIZE - 2](a file
> name
> + must be at least 1 byte).
> +
> + 12 - 15: backing file name size
> + Length of the backing file name in bytes. It will be > 0
> + if the backing file name offset is 0. If backing file
> + name offset is non-zero, then it must be non-zero.
> Must
> + be less than [HEADER_SIZE - 80] to fit in the
> reserved
> + part of the header. Backing file name offset + size
> + must be no more than HEADER_SIZE.
> +
> + 16 - 19: image file name offset
> + Offset in the add-cow file at which the image file
> name
> + is stored (NB: The string is not NUL-terminated). It
> + must be between 80 and [HEADER_SIZE - 2]. Image file
> + name size + offset must be no more than HEADER_SIZE.
> +
> + 20 - 23: image file name size
> + Length of the image file name in bytes.
> + Must be less than [HEADER_SIZE - 80] to fit in the
> reserved
> + part of the header.
> +
> + 24 - 27: cluster bits
> + Number of bits that are used for addressing an offset
> + within a cluster (1 << cluster_bits is the cluster
> size).
> + Must not be less than 9 (i.e. 512 byte clusters).
> +
> + Note: qemu as of today has an implementation limit
> of 2 MB
> + as the maximum cluster size and won't be able to
> open images
> + with larger cluster sizes.
> +
> + 28 - 35: features
> + Bitmask of features. If a feature bit is set but not
> recognized,
> + the add-cow file should be dropped. They are not
> used in v1.
Does v1 mean header.version = 1? I think this is wrong, we will want to
add incompatible feature flags without increasing header.version (that's
the whole point of them)
> +
> + Bits 0-63: Reserved (set to 0)
> +
> + 36 - 43: compatible features
> + Bitmask of compatible features. An implementation can
> + safely ignore any unknown bits that are set.
> + Bit 0: All allocated bit. If this bit is set
> then
> + backing file and COW bitmap will not be
> used,
> + and can read from or write to image file
> directly.
> +
> + Bits 1-63: Reserved (set to 0)
> +
> + 44 - 47: HEADER_SIZE
> + The header field is variable-sized. This field
> indicates
> + how many bytes will be used to store add-cow header.
> + In add-cow v1, it is fixed to 4096.
Same question about v1. If it's fixed, why have a field for it?
> +
> + 48 - 63: backing file format
> + Format of backing file. It will be filled with 0 if
> + backing file name offset is 0. If backing file name
> + offset is non-empty, it must be non-empty. It is
> coded
> + in free-form ASCII, and is not NUL-terminated. Zero
> + padded on the right.
> +
> + 64 - 79: image file format
> + Format of image file. It must be non-empty. It is
> coded
> + in free-form ASCII, and is not NUL-terminated. Zero
> + padded on the right.
> +
> + 80 - [HEADER_SIZE - 1]:
> + It is used to make sure COW bitmap field starts at
> the
> + HEADER_SIZE byte, backing file name and image file
> name
> + will be stored here. The bytes that are not pointing
> to
> + backing file and image file names must be set to 0.
> +
> +== COW bitmap ==
> +
> +The "COW bitmap" field starts at offset HEADER_SIZE, stores a bitmap related
> to
> +backing file and image file. It is tracking whether the sector in image file
> +is allocated or not.
> +
> +Each bit in the bitmap tracks one cluster's status. For example, if cluster
> +bit is 16, then each bit tracks one cluster, (1 << 16) = 65536 bytes. The
clusters bit_s_
> +image file size is rounded up to cluster size (where any bytes in the
> +last cluster that do not fit in the image are ignored), then if the
> +number of clusters is not a multiple of 8, then remaining bits in the
> +bitmap will be set to 0.
> +
> +The size of bitmap is calculated according to virtual size of image file, and
> +the size of bitmap should be multiple of add-cow file's cluster size, the
> bits
> +not used will be set to 0. Within each byte, the least significant bit covers
> +the first cluster. Bit orders in one byte look like:
> + +----+----+----+----+----+----+----+----+
> + | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |
> + +----+----+----+----+----+----+----+----+
> +
> +If the bit is 0, it indicates the sector has not been allocated in image
> file,
s/sector/cluster/
More instances follow, not commenting on each.
> +data should be loaded from backing file while reading; if the bit is 1, it
> +indicates the related sector has been dirty, should be loaded from image file
> +while reading. Writing to a sector causes the corresponding bit to be set to
> 1.
> +If there is no backing file, or if the image file is larger than the backing
> +file and the offset is beyond the end of the backing file, then the data
> should
> +be read as all zero bytes instead.
> +
> +If raw image is not an even multiple of cluster bytes, bits that correspond
> to
> +bytes beyond the raw file size in add-cow must be written as 0 and must be
> +ignored when reading.
Don't refer to a "raw image", it could be any image format.
> +
> +Image file name and backing file name must NOT be the same, we prevent this
> +while creating add-cow files via qemu-img. If image file name and backing
> file
> +name are the same, the add-cow image must be treated as invalid.
Kevin