[Qemu-devel] [PATCH v2 38/45] mirror: perform COW if the cluster size is bigger than the granularity

[Paolo Bonzini]

When mirroring runs, the backing files for the target may not yet be
ready.  However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros.  Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying).  So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.

However, we want to lower the granularity for efficiency, so we need
a better solution.  The solution is to always copy a whole cluster the
first time it is touched.  The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.

Signed-off-by: Paolo Bonzini <address@hidden>
---
        v1->v2: new testcase

 block/mirror.c             | 60 +++++++++++++++++++++++++++++++++++++++-------
 blockdev.c                 | 15 +++---------
 tests/qemu-iotests/040     | 21 ++++++++++++++++
 tests/qemu-iotests/040.out |  4 ++--
 trace-events               |  1 +
 5 file modificati, 78 inserzioni(+), 23 rimozioni(-)

diff --git a/block/mirror.c b/block/mirror.c
index 72e0986..49f9bde 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -15,6 +15,7 @@
 #include "blockjob.h"
 #include "block_int.h"
 #include "qemu/ratelimit.h"
+#include "bitmap.h"
 
 enum {
     /*
@@ -36,6 +37,8 @@ typedef struct MirrorBlockJob {
     bool synced;
     bool complete;
     int64_t sector_num;
+    size_t buf_size;
+    unsigned long *cow_bitmap;
     HBitmapIter hbi;
     uint8_t *buf;
 } MirrorBlockJob;
@@ -60,7 +63,7 @@ static int coroutine_fn mirror_iteration(MirrorBlockJob *s,
     BlockDriverState *target = s->target;
     QEMUIOVector qiov;
     int ret, nb_sectors;
-    int64_t end;
+    int64_t end, sector_num, cluster_num;
     struct iovec iov;
 
     s->sector_num = hbitmap_iter_next(&s->hbi);
@@ -71,22 +74,41 @@ static int coroutine_fn mirror_iteration(MirrorBlockJob *s,
         assert(s->sector_num >= 0);
     }
 
+    /* If we have no backing file yet in the destination, and the cluster size
+     * is very large, we need to do COW ourselves.  The first time a cluster is
+     * copied, copy it entirely.
+     *
+     * Because both BDRV_SECTORS_PER_DIRTY_CHUNK and the cluster size are
+     * powers of two, the number of sectors to copy cannot exceed one cluster.
+     */
+    sector_num = s->sector_num;
+    nb_sectors = BDRV_SECTORS_PER_DIRTY_CHUNK;
+    cluster_num = sector_num / BDRV_SECTORS_PER_DIRTY_CHUNK;
+    if (s->cow_bitmap && !test_bit(cluster_num, s->cow_bitmap)) {
+        trace_mirror_cow(s, sector_num);
+        bdrv_round_to_clusters(s->target,
+                               sector_num, BDRV_SECTORS_PER_DIRTY_CHUNK,
+                               &sector_num, &nb_sectors);
+        bitmap_set(s->cow_bitmap, sector_num / BDRV_SECTORS_PER_DIRTY_CHUNK,
+                   nb_sectors / BDRV_SECTORS_PER_DIRTY_CHUNK);
+    }
+
     end = s->common.len >> BDRV_SECTOR_BITS;
-    nb_sectors = MIN(BDRV_SECTORS_PER_DIRTY_CHUNK, end - s->sector_num);
-    bdrv_reset_dirty(source, s->sector_num, nb_sectors);
+    nb_sectors = MIN(nb_sectors, end - sector_num);
+    bdrv_reset_dirty(source, sector_num, nb_sectors);
 
     /* Copy the dirty cluster.  */
     iov.iov_base = s->buf;
     iov.iov_len  = nb_sectors * 512;
     qemu_iovec_init_external(&qiov, &iov, 1);
 
-    trace_mirror_one_iteration(s, s->sector_num, nb_sectors);
-    ret = bdrv_co_readv(source, s->sector_num, nb_sectors, &qiov);
+    trace_mirror_one_iteration(s, sector_num, nb_sectors);
+    ret = bdrv_co_readv(source, sector_num, nb_sectors, &qiov);
     if (ret < 0) {
         *p_action = mirror_error_action(s, true, -ret);
         goto fail;
     }
-    ret = bdrv_co_writev(target, s->sector_num, nb_sectors, &qiov);
+    ret = bdrv_co_writev(target, sector_num, nb_sectors, &qiov);
     if (ret < 0) {
         *p_action = mirror_error_action(s, false, -ret);
         s->synced = false;
@@ -96,7 +118,7 @@ static int coroutine_fn mirror_iteration(MirrorBlockJob *s,
 
 fail:
     /* Try again later.  */
-    bdrv_set_dirty(source, s->sector_num, nb_sectors);
+    bdrv_set_dirty(source, sector_num, nb_sectors);
     return ret;
 }
 
@@ -104,7 +126,9 @@ static void coroutine_fn mirror_run(void *opaque)
 {
     MirrorBlockJob *s = opaque;
     BlockDriverState *bs = s->common.bs;
-    int64_t sector_num, end;
+    int64_t sector_num, end, length;
+    BlockDriverInfo bdi;
+    char backing_filename[1024];
     int ret = 0;
     int n;
 
@@ -118,8 +142,23 @@ static void coroutine_fn mirror_run(void *opaque)
         return;
     }
 
+    /* If we have no backing file yet in the destination, we cannot let
+     * the destination do COW.  Instead, we copy sectors around the
+     * dirty data if needed.  We need a bitmap to do that.
+     */
+    bdrv_get_backing_filename(s->target, backing_filename,
+                              sizeof(backing_filename));
+    if (backing_filename[0] && !s->target->backing_hd) {
+        bdrv_get_info(s->target, &bdi);
+        if (s->buf_size < bdi.cluster_size) {
+            s->buf_size = bdi.cluster_size;
+            length = (bdrv_getlength(bs) + BLOCK_SIZE - 1) / BLOCK_SIZE;
+            s->cow_bitmap = bitmap_new(length);
+        }
+    }
+
     end = s->common.len >> BDRV_SECTOR_BITS;
-    s->buf = qemu_blockalign(bs, BLOCK_SIZE);
+    s->buf = qemu_blockalign(bs, s->buf_size);
 
     if (s->mode != MIRROR_SYNC_MODE_NONE) {
         /* First part, loop on the sectors and initialize the dirty bitmap.  */
@@ -233,6 +272,7 @@ static void coroutine_fn mirror_run(void *opaque)
 
 immediate_exit:
     g_free(s->buf);
+    g_free(s->cow_bitmap);
     bdrv_set_dirty_tracking(bs, false);
     bdrv_iostatus_disable(s->target);
     if (s->complete && ret == 0) {
@@ -316,6 +356,8 @@ void mirror_start(BlockDriverState *bs, BlockDriverState 
*target,
     s->on_target_error = on_target_error;
     s->target = target;
     s->mode = mode;
+    s->buf_size = BLOCK_SIZE;
+
     bdrv_set_dirty_tracking(bs, true);
     bdrv_set_enable_write_cache(s->target, true);
     bdrv_set_on_error(s->target, on_target_error, on_target_error);
diff --git a/blockdev.c b/blockdev.c
index 84fee2f..c989ce6 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1126,7 +1126,6 @@ void qmp_drive_mirror(const char *device, const char 
*target,
                       bool has_on_target_error, BlockdevOnError 
on_target_error,
                       Error **errp)
 {
-    BlockDriverInfo bdi;
     BlockDriverState *bs;
     BlockDriverState *source, *target_bs;
     BlockDriver *proto_drv;
@@ -1217,6 +1216,9 @@ void qmp_drive_mirror(const char *device, const char 
*target,
         return;
     }
 
+    /* Mirroring takes care of copy-on-write using the source's backing
+     * file.
+     */
     target_bs = bdrv_new("");
     ret = bdrv_open(target_bs, target, flags | BDRV_O_NO_BACKING, drv);
 
@@ -1226,17 +1228,6 @@ void qmp_drive_mirror(const char *device, const char 
*target,
         return;
     }
 
-    /* We need a backing file if we will copy parts of a cluster.  */
-    if (bdrv_get_info(target_bs, &bdi) >= 0 && bdi.cluster_size != 0 &&
-        bdi.cluster_size >= BDRV_SECTORS_PER_DIRTY_CHUNK * 512) {
-        ret = bdrv_open_backing_file(target_bs);
-        if (ret < 0) {
-            bdrv_delete(target_bs);
-            error_set(errp, QERR_OPEN_FILE_FAILED, target);
-            return;
-        }
-    }
-
     mirror_start(bs, target_bs, speed, sync, on_source_error, on_target_error,
                  block_job_cb, bs, &local_err);
     if (local_err != NULL) {
diff --git a/tests/qemu-iotests/040 b/tests/qemu-iotests/040
index ec86c70..39d07a6 100755
--- a/tests/qemu-iotests/040
+++ b/tests/qemu-iotests/040
@@ -283,6 +283,27 @@ class TestMirrorNoBacking(ImageMirroringTestCase):
         self.assertTrue(self.compare_images(test_img, target_img),
                         'target image does not match source after mirroring')
 
+    def test_large_cluster(self):
+        self.assert_no_active_mirrors()
+
+        # qemu-img create fails if the image is not there
+        qemu_img('create', '-f', iotests.imgfmt, '-o', 'size=%d'
+                        %(TestMirrorNoBacking.image_len), target_backing_img)
+        qemu_img('create', '-f', iotests.imgfmt, '-o', 
'cluster_size=%d,backing_file=%s'
+                        % (TestMirrorNoBacking.image_len, target_backing_img), 
target_img)
+        os.remove(target_backing_img)
+
+        result = self.vm.qmp('drive-mirror', device='drive0', sync='full',
+                             mode='existing', target=target_img)
+        self.assert_qmp(result, 'return', {})
+
+        self.complete_and_wait()
+        result = self.vm.qmp('query-block')
+        self.assert_qmp(result, 'return[0]/inserted/file', target_img)
+        self.vm.shutdown()
+        self.assertTrue(self.compare_images(test_img, target_img),
+                        'target image does not match source after mirroring')
+
 class TestReadErrors(ImageMirroringTestCase):
     image_len = 2 * 1024 * 1024 # MB
 
diff --git a/tests/qemu-iotests/040.out b/tests/qemu-iotests/040.out
index b6f2576..52d796e 100644
--- a/tests/qemu-iotests/040.out
+++ b/tests/qemu-iotests/040.out
@@ -1,5 +1,5 @@
-................
+.................
 ----------------------------------------------------------------------
-Ran 16 tests
+Ran 17 tests
 
 OK
diff --git a/trace-events b/trace-events
index 99818d5..8bca020 100644
--- a/trace-events
+++ b/trace-events
@@ -82,6 +82,7 @@ mirror_before_flush(void *s) "s %p"
 mirror_before_drain(void *s, int64_t cnt) "s %p dirty count %"PRId64
 mirror_before_sleep(void *s, int64_t cnt, int synced) "s %p dirty count 
%"PRId64" synced %d"
 mirror_one_iteration(void *s, int64_t sector_num, int nb_sectors) "s %p 
sector_num %"PRId64" nb_sectors %d"
+mirror_cow(void *s, int64_t sector_num) "s %p sector_num %"PRId64
 
 # blockdev.c
 qmp_block_job_cancel(void *job) "job %p"
-- 
1.7.12