[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1033727] [NEW] USB passthrough doesn't work anymore wi
From: |
Klaus Hochlehnert |
Subject: |
[Qemu-devel] [Bug 1033727] [NEW] USB passthrough doesn't work anymore with qemu-kvm 1.1.1 |
Date: |
Tue, 07 Aug 2012 01:20:56 -0000 |
Public bug reported:
Hi,
I have a "Bus 006 Device 002: ID 0d46:3003 Kobil Systems GmbH mIDentity Light /
KAAN SIM III" (kind of smart card) in an USB port whitch I make available to a
Windows XP guest.
This worked fine with every older qemu-kvm version I've used so far.
But since 1.1.0 it doesn't work anymore.
The device shows up in the guest, but the software can't access it anymore (and
the guest is pretty unresponsive).
On the host I get every 2 seconds this message:
[ 7719.239528] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Command line options are:
/usr/bin/kvm
...
-device usb-host,vendorid=0x0d46,productid=0x3003,bus=usb.0,port=3
...
When I switch back to qemu-kvm 1.0.1 everything works fine again.
Any idea what the problem could be?
Thanks
Klaus
** Affects: qemu
Importance: Undecided
Status: New
** Description changed:
Hi,
- I have a "Bus 006 Device 002: ID 0d46:3003 Kobil Systems GmbH mIDentity Light
/ KAAN SIM III" (kind of smart card) in an USB port witch I make available to a
Windows XP guest.
+ I have a "Bus 006 Device 002: ID 0d46:3003 Kobil Systems GmbH mIDentity Light
/ KAAN SIM III" (kind of smart card) in an USB port whitch I make available to
a Windows XP guest.
This worked fine with every older qemu-kvm version I've used so far.
But since 1.1.0 it doesn't work anymore.
The device shows up in the guest, but the software can't access it anymore
(and the guest is pretty unresponsive).
On the host I get every 2 seconds this message:
[ 7719.239528] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Command line options are:
/usr/bin/kvm
...
-device usb-host,vendorid=0x0d46,productid=0x3003,bus=usb.0,port=3
...
When I switch back to qemu-kvm 1.0.1 everything works fine again.
Any idea what the problem could be?
Thanks
Klaus
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1033727
Title:
USB passthrough doesn't work anymore with qemu-kvm 1.1.1
Status in QEMU:
New
Bug description:
Hi,
I have a "Bus 006 Device 002: ID 0d46:3003 Kobil Systems GmbH mIDentity Light
/ KAAN SIM III" (kind of smart card) in an USB port whitch I make available to
a Windows XP guest.
This worked fine with every older qemu-kvm version I've used so far.
But since 1.1.0 it doesn't work anymore.
The device shows up in the guest, but the software can't access it anymore
(and the guest is pretty unresponsive).
On the host I get every 2 seconds this message:
[ 7719.239528] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Command line options are:
/usr/bin/kvm
...
-device usb-host,vendorid=0x0d46,productid=0x3003,bus=usb.0,port=3
...
When I switch back to qemu-kvm 1.0.1 everything works fine again.
Any idea what the problem could be?
Thanks
Klaus
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1033727/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |