[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data |
Date: |
Wed, 18 Jul 2012 18:23:55 +0300 |
On Wed, Jul 18, 2012 at 11:17:12PM +1000, Alexey Kardashevskiy wrote:
> On 18/07/12 22:43, Michael S. Tsirkin wrote:
> > On Thu, Jun 21, 2012 at 09:39:10PM +1000, Alexey Kardashevskiy wrote:
> >> Added (msi|msix)_set_message() functions.
> >>
> >> Currently msi_notify()/msix_notify() write to these vectors to
> >> signal the guest about an interrupt so the correct values have to
> >> written there by the guest or QEMU.
> >>
> >> For example, POWER guest never initializes MSI/MSIX vectors, instead
> >> it uses RTAS hypercalls. So in order to support MSIX for virtio-pci on
> >> POWER we have to initialize MSI/MSIX message from QEMU.
> >>
> >> Signed-off-by: Alexey Kardashevskiy <address@hidden>
> >
> > So guests do enable MSI through config space, but do
> > not fill in vectors?
>
> Yes. msix_capability_init() calls arch_setup_msi_irqs() which does everything
> it needs to do (i.e. calls hypervisor) before msix_capability_init() writes
> PCI_MSIX_FLAGS_ENABLE to the PCI_MSIX_FLAGS register.
>
> These vectors are the PCI bus addresses, the way they are set is specific for
> a PCI host controller, I do not see why the current scheme is a bug.
I won't work with any real PCI device, will it? Real pci devices expect
vectors to be written into their memory.
> > Very strange. Are you sure it's not
> > just a guest bug? How does it work for other PCI devices?
>
> Did not get the question. It works the same for every PCI device under POWER
> guest.
I mean for real PCI devices.
> > Can't we just fix guest drivers to program the vectors properly?
> >
> > Also pls address the comment below.
>
> Comment below.
>
> > Thanks!
> >
> >> ---
> >> hw/msi.c | 13 +++++++++++++
> >> hw/msi.h | 1 +
> >> hw/msix.c | 9 +++++++++
> >> hw/msix.h | 2 ++
> >> 4 files changed, 25 insertions(+)
> >>
> >> diff --git a/hw/msi.c b/hw/msi.c
> >> index 5233204..cc6102f 100644
> >> --- a/hw/msi.c
> >> +++ b/hw/msi.c
> >> @@ -105,6 +105,19 @@ static inline uint8_t msi_pending_off(const
> >> PCIDevice* dev, bool msi64bit)
> >> return dev->msi_cap + (msi64bit ? PCI_MSI_PENDING_64 :
> >> PCI_MSI_PENDING_32);
> >> }
> >>
> >> +void msi_set_message(PCIDevice *dev, MSIMessage msg)
> >> +{
> >> + uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
> >> + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT;
> >> +
> >> + if (msi64bit) {
> >> + pci_set_quad(dev->config + msi_address_lo_off(dev), msg.address);
> >> + } else {
> >> + pci_set_long(dev->config + msi_address_lo_off(dev), msg.address);
> >> + }
> >> + pci_set_word(dev->config + msi_data_off(dev, msi64bit), msg.data);
> >> +}
> >> +
> >
> > Please add documentation. Something like
> >
> > /*
> > * Special API for POWER to configure the vectors through
> > * a side channel. Should never be used by devices.
> > */
>
>
> It is useful for any para-virtualized environment I believe, is not it?
> For s390 as well. Of course, if it supports PCI, for example, what I am not
> sure it does though :)
I expect the normal guest to program the address into MSI register using
config accesses, same way that it enables MSI/MSIX.
Why POWER does it differently I did not yet figure out but I hope
this weirdness is not so widespread.
> >> bool msi_enabled(const PCIDevice *dev)
> >> {
> >> return msi_present(dev) &&
> >> diff --git a/hw/msi.h b/hw/msi.h
> >> index 75747ab..6ec1f99 100644
> >> --- a/hw/msi.h
> >> +++ b/hw/msi.h
> >> @@ -31,6 +31,7 @@ struct MSIMessage {
> >>
> >> extern bool msi_supported;
> >>
> >> +void msi_set_message(PCIDevice *dev, MSIMessage msg);
> >> bool msi_enabled(const PCIDevice *dev);
> >> int msi_init(struct PCIDevice *dev, uint8_t offset,
> >> unsigned int nr_vectors, bool msi64bit, bool
> >> msi_per_vector_mask);
> >> diff --git a/hw/msix.c b/hw/msix.c
> >> index ded3c55..5f7d6d3 100644
> >> --- a/hw/msix.c
> >> +++ b/hw/msix.c
> >> @@ -45,6 +45,15 @@ static MSIMessage msix_get_message(PCIDevice *dev,
> >> unsigned vector)
> >> return msg;
> >> }
> >>
> >> +void msix_set_message(PCIDevice *dev, int vector, struct MSIMessage msg)
> >> +{
> >> + uint8_t *table_entry = dev->msix_table_page + vector *
> >> PCI_MSIX_ENTRY_SIZE;
> >> +
> >> + pci_set_quad(table_entry + PCI_MSIX_ENTRY_LOWER_ADDR, msg.address);
> >> + pci_set_long(table_entry + PCI_MSIX_ENTRY_DATA, msg.data);
> >> + table_entry[PCI_MSIX_ENTRY_VECTOR_CTRL] &=
> >> ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
> >> +}
> >> +
> >> /* Add MSI-X capability to the config space for the device. */
> >> /* Given a bar and its size, add MSI-X table on top of it
> >> * and fill MSI-X capability in the config space.
> >> diff --git a/hw/msix.h b/hw/msix.h
> >> index 50aee82..26a437e 100644
> >> --- a/hw/msix.h
> >> +++ b/hw/msix.h
> >> @@ -4,6 +4,8 @@
> >> #include "qemu-common.h"
> >> #include "pci.h"
> >>
> >> +void msix_set_message(PCIDevice *dev, int vector, MSIMessage msg);
> >> +
> >> int msix_init(PCIDevice *pdev, unsigned short nentries,
> >> MemoryRegion *bar,
> >> unsigned bar_nr, unsigned bar_size);
> >> --
> >> 1.7.10
> >>
> >> ps. double '-' and git version is an end-of-patch scissor as I read
> >> somewhere, cannot recall where exactly :)
> >>
> >>
> >>
> >>
> >>
> >>
> >> On 21/06/12 20:56, Jan Kiszka wrote:
> >>> On 2012-06-21 12:50, Alexey Kardashevskiy wrote:
> >>>> On 21/06/12 20:38, Jan Kiszka wrote:
> >>>>> On 2012-06-21 12:28, Alexey Kardashevskiy wrote:
> >>>>>> On 21/06/12 17:39, Jan Kiszka wrote:
> >>>>>>> On 2012-06-21 09:18, Alexey Kardashevskiy wrote:
> >>>>>>>>
> >>>>>>>> agrhhh. sha1 of the patch changed after rebasing :)
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Added (msi|msix)_(set|get)_message() function for whoever might
> >>>>>>>> want to use them.
> >>>>>>>>
> >>>>>>>> Currently msi_notify()/msix_notify() write to these vectors to
> >>>>>>>> signal the guest about an interrupt so the correct values have to
> >>>>>>>> written there by the guest or QEMU.
> >>>>>>>>
> >>>>>>>> For example, POWER guest never initializes MSI/MSIX vectors, instead
> >>>>>>>> it uses RTAS hypercalls. So in order to support MSIX for virtio-pci
> >>>>>>>> on
> >>>>>>>> POWER we have to initialize MSI/MSIX message from QEMU.
> >>>>>>>>
> >>>>>>>> As only set* function are required by now, the "get" functions were
> >>>>>>>> added
> >>>>>>>> or made public for a symmetry.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Alexey Kardashevskiy <address@hidden>
> >>>>>>>> ---
> >>>>>>>> hw/msi.c | 29 +++++++++++++++++++++++++++++
> >>>>>>>> hw/msi.h | 2 ++
> >>>>>>>> hw/msix.c | 11 ++++++++++-
> >>>>>>>> hw/msix.h | 3 +++
> >>>>>>>> 4 files changed, 44 insertions(+), 1 deletion(-)
> >>>>>>>>
> >>>>>>>> diff --git a/hw/msi.c b/hw/msi.c
> >>>>>>>> index 5233204..9ad84a4 100644
> >>>>>>>> --- a/hw/msi.c
> >>>>>>>> +++ b/hw/msi.c
> >>>>>>>> @@ -105,6 +105,35 @@ static inline uint8_t msi_pending_off(const
> >>>>>>>> PCIDevice* dev, bool msi64bit)
> >>>>>>>> return dev->msi_cap + (msi64bit ? PCI_MSI_PENDING_64 :
> >>>>>>>> PCI_MSI_PENDING_32);
> >>>>>>>> }
> >>>>>>>>
> >>>>>>>> +MSIMessage msi_get_message(PCIDevice *dev)
> >>>>>>>
> >>>>>>> MSIMessage msi_get_message(PCIDevice *dev, unsigned vector)
> >>>>>>
> >>>>>>
> >>>>>> Who/how/why is going to calculate the vector here?
> >>>>>>
> >>>>>>>
> >>>>>>>> +{
> >>>>>>>> + uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
> >>>>>>>> + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT;
> >>>>>>>> + MSIMessage msg;
> >>>>>>>> +
> >>>>>>>> + if (msi64bit) {
> >>>>>>>> + msg.address = pci_get_quad(dev->config +
> >>>>>>>> msi_address_lo_off(dev));
> >>>>>>>> + } else {
> >>>>>>>> + msg.address = pci_get_long(dev->config +
> >>>>>>>> msi_address_lo_off(dev));
> >>>>>>>> + }
> >>>>>>>> + msg.data = pci_get_word(dev->config + msi_data_off(dev,
> >>>>>>>> msi64bit));
> >>>>>>>
> >>>>>>> And I have this here in addition:
> >>>>>>>
> >>>>>>> unsigned int nr_vectors = msi_nr_vectors(flags);
> >>>>>>> ...
> >>>>>>>
> >>>>>>> if (nr_vectors > 1) {
> >>>>>>> msg.data &= ~(nr_vectors - 1);
> >>>>>>> msg.data |= vector;
> >>>>>>> }
> >>>>>>>
> >>>>>>> See PCI spec and existing code.
> >>>>>>
> >>>>>>
> >>>>>> What for? I really do not get it why someone might want to read
> >>>>>> something but not real value.
> >>>>>> What PCI code should I look?
> >>>>>
> >>>>> I'm not sure what your use case for reading the message is. For KVM
> >>>>> device assignment it is preparing an alternative message delivery path
> >>>>> for MSI vectors. And for this we will need vector notifier support for
> >>>>> MSI as well. You can check the MSI-X code for corresponding use cases of
> >>>>> msix_get_message.
> >>>>
> >>>>> And when we already have msi_get_message, another logical use case is
> >>>>> msi_notify. See msix.c again.
> >>>>
> >>>> Aaaa.
> >>>>
> >>>> I have no case for reading the message. All I need is writing. And I
> >>>> want it public as I want to use
> >>>> it from hw/spapr_pci.c. You suggested to add reading, I added "get" to
> >>>> be _symmetric_ to "set"
> >>>> ("get" returns what "set" wrote). You want a different thing which I can
> >>>> do but it is not
> >>>> msi_get_message(), it is something like msi_prepare_message(MSImessage
> >>>> msg) or
> >>>> msi_set_vector(uint16_t data) or simply internal kitchen of msi_notify().
> >>>>
> >>>> Still can do what you suggested, it just does not seem right.
> >>>
> >>> It is right - when looking at it from a different angle. ;)
> >>>
> >>> I don't mind if you add msi_get_message now or leave this to me. Likely
> >>> the latter is better as you have no use case for msi_get_message (and
> >>> also msix_get_message!) outside of their modules, thus we should not
> >>> export those functions anyway.
>
>
>
> --
> Alexey
>
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Michael S. Tsirkin, 2012/07/18
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Alexey Kardashevskiy, 2012/07/18
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data,
Michael S. Tsirkin <=
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Alexey Kardashevskiy, 2012/07/18
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Michael S. Tsirkin, 2012/07/19
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Alexey Kardashevskiy, 2012/07/19
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Michael S. Tsirkin, 2012/07/19
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Alexey Kardashevskiy, 2012/07/19
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Michael S. Tsirkin, 2012/07/19
- [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Alexey Kardashevskiy, 2012/07/18
- Re: [Qemu-devel] [PATCH] msi/msix: added API to set MSI message address and data, Michael S. Tsirkin, 2012/07/19