[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC][PATCH v2 2/4] tcg: add extended MMU helpers to so
From: |
Peter Maydell |
Subject: |
Re: [Qemu-devel] [RFC][PATCH v2 2/4] tcg: add extended MMU helpers to softmmu targets |
Date: |
Thu, 5 Jul 2012 14:43:59 +0100 |
On 5 July 2012 14:23, Yeongkyoon Lee <address@hidden> wrote:
> Add extended MMU helpers to softmmu targets, where the targets are alpha,
> arm, cris, i386, lm32, m68k, microblaze, mips, ppc, s390x, sh4, sparc and
> xtensa.
>
> Signed-off-by: Yeongkyoon Lee <address@hidden>
> ---
> target-alpha/mem_helper.c | 22 ++++++++++++++++++++++
> target-arm/op_helper.c | 23 +++++++++++++++++++++++
> target-cris/op_helper.c | 22 ++++++++++++++++++++++
> target-i386/mem_helper.c | 22 ++++++++++++++++++++++
> target-lm32/op_helper.c | 23 ++++++++++++++++++++++-
> target-m68k/op_helper.c | 22 ++++++++++++++++++++++
> target-microblaze/op_helper.c | 22 ++++++++++++++++++++++
> target-mips/op_helper.c | 22 ++++++++++++++++++++++
> target-ppc/mem_helper.c | 22 ++++++++++++++++++++++
> target-s390x/op_helper.c | 22 ++++++++++++++++++++++
> target-sh4/op_helper.c | 22 ++++++++++++++++++++++
> target-sparc/ldst_helper.c | 23 +++++++++++++++++++++++
> target-xtensa/op_helper.c | 22 ++++++++++++++++++++++
> 13 files changed, 288 insertions(+), 1 deletions(-)
This makes the already slightly repetitive inclusion of the
softmmu_templates even more repetitive. Perhaps we could abstract
it all out into a single header which the targets can include?
>
> diff --git a/target-alpha/mem_helper.c b/target-alpha/mem_helper.c
> index 87cada4..ef880a7 100644
> --- a/target-alpha/mem_helper.c
> +++ b/target-alpha/mem_helper.c
> @@ -132,6 +132,28 @@ void cpu_unassigned_access(CPUAlphaState *env,
> target_phys_addr_t addr,
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
"Extended".
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> /* try to fill the TLB and return an exception if error. If retaddr is
> NULL, it means that the function was called in C code (i.e. not
> from generated code or from helper.c) */
> diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
> index 490111c..8ff1209 100644
> --- a/target-arm/op_helper.c
> +++ b/target-arm/op_helper.c
> @@ -69,6 +69,29 @@ uint32_t HELPER(neon_tbl)(uint32_t ireg, uint32_t def,
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> /* try to fill the TLB and return an exception if error. If retaddr is
> NULL, it means that the function was called in C code (i.e. not
> from generated code or from helper.c) */
> diff --git a/target-cris/op_helper.c b/target-cris/op_helper.c
> index ac7c98c..cc34f3c 100644
> --- a/target-cris/op_helper.c
> +++ b/target-cris/op_helper.c
> @@ -52,6 +52,28 @@
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> /* Try to fill the TLB and return an exception if error. If retaddr is
> NULL, it means that the function was called in C code (i.e. not
> from generated code or from helper.c) */
> diff --git a/target-i386/mem_helper.c b/target-i386/mem_helper.c
> index 91353c0..59fb03c 100644
> --- a/target-i386/mem_helper.c
> +++ b/target-i386/mem_helper.c
> @@ -126,6 +126,28 @@ void helper_boundl(target_ulong a0, int v)
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> #endif
>
> #if !defined(CONFIG_USER_ONLY)
> diff --git a/target-lm32/op_helper.c b/target-lm32/op_helper.c
> index 51edc1a..bcdddf7 100644
> --- a/target-lm32/op_helper.c
> +++ b/target-lm32/op_helper.c
> @@ -18,6 +18,28 @@
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> void helper_raise_exception(uint32_t index)
> {
> env->exception_index = index;
> @@ -101,4 +123,3 @@ void tlb_fill(CPULM32State *env1, target_ulong addr, int
> is_write, int mmu_idx,
> env = saved_env;
> }
> #endif
> -
> diff --git a/target-m68k/op_helper.c b/target-m68k/op_helper.c
> index 1971a57..454fd71 100644
> --- a/target-m68k/op_helper.c
> +++ b/target-m68k/op_helper.c
> @@ -51,6 +51,28 @@ extern int semihosting_enabled;
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> /* Try to fill the TLB and return an exception if error. If retaddr is
> NULL, it means that the function was called in C code (i.e. not
> from generated code or from helper.c) */
> diff --git a/target-microblaze/op_helper.c b/target-microblaze/op_helper.c
> index 3b1f072..12be3bd 100644
> --- a/target-microblaze/op_helper.c
> +++ b/target-microblaze/op_helper.c
> @@ -39,6 +39,28 @@
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> /* Try to fill the TLB and return an exception if error. If retaddr is
> NULL, it means that the function was called in C code (i.e. not
> from generated code or from helper.c) */
> diff --git a/target-mips/op_helper.c b/target-mips/op_helper.c
> index 66037ac..c2fd2db 100644
> --- a/target-mips/op_helper.c
> +++ b/target-mips/op_helper.c
> @@ -2303,6 +2303,28 @@ static void QEMU_NORETURN
> do_unaligned_access(target_ulong addr, int is_write,
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> static void do_unaligned_access(target_ulong addr, int is_write,
> int is_user, uintptr_t retaddr)
> {
> diff --git a/target-ppc/mem_helper.c b/target-ppc/mem_helper.c
> index 5b5f1bd..01a9ac6 100644
> --- a/target-ppc/mem_helper.c
> +++ b/target-ppc/mem_helper.c
> @@ -268,6 +268,28 @@ STVE(stvewx, cpu_stl_data, bswap32, u32)
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> /* try to fill the TLB and return an exception if error. If retaddr is
> NULL, it means that the function was called in C code (i.e. not
> from generated code or from helper.c) */
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index 7b72473..05109c5 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -52,6 +52,28 @@
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> /* try to fill the TLB and return an exception if error. If retaddr is
> NULL, it means that the function was called in C code (i.e. not
> from generated code or from helper.c) */
> diff --git a/target-sh4/op_helper.c b/target-sh4/op_helper.c
> index 4054791..f7c1f67 100644
> --- a/target-sh4/op_helper.c
> +++ b/target-sh4/op_helper.c
> @@ -53,6 +53,28 @@ static void cpu_restore_state_from_retaddr(uintptr_t
> retaddr)
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> void tlb_fill(CPUSH4State *env1, target_ulong addr, int is_write, int
> mmu_idx,
> uintptr_t retaddr)
> {
> diff --git a/target-sparc/ldst_helper.c b/target-sparc/ldst_helper.c
> index 9bec7a9..1ceb588 100644
> --- a/target-sparc/ldst_helper.c
> +++ b/target-sparc/ldst_helper.c
> @@ -80,6 +80,29 @@
>
> #define SHIFT 3
> #include "softmmu_template.h"
> +
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> #endif
>
> #if defined(TARGET_SPARC64) && !defined(CONFIG_USER_ONLY)
> diff --git a/target-xtensa/op_helper.c b/target-xtensa/op_helper.c
> index 2659c0e..536e1fb 100644
> --- a/target-xtensa/op_helper.c
> +++ b/target-xtensa/op_helper.c
> @@ -47,6 +47,28 @@ static void do_unaligned_access(CPUXtensaState *env,
> #define SHIFT 3
> #include "softmmu_template.h"
>
> +#if defined(CONFIG_QEMU_LDST_OPTIMIZATION)
> +/* Exteneded MMU helper funtions for qemu_ld/st optimization
> + Note that normal helper functions should be defined above
> + to avoid duplication of common functions, slow_ld/st and io_read/write.
> + */
> +#define USE_EXTENDED_HELPER
> +
> +#define SHIFT 0
> +#include "softmmu_template.h"
> +
> +#define SHIFT 1
> +#include "softmmu_template.h"
> +
> +#define SHIFT 2
> +#include "softmmu_template.h"
> +
> +#define SHIFT 3
> +#include "softmmu_template.h"
> +
> +#undef USE_EXTENDED_HELPER
> +#endif /* CONFIG_QEMU_LDST_OPTIMIZATION */
> +
> static void do_restore_state(CPUXtensaState *env, uintptr_t pc)
> {
> TranslationBlock *tb;
> --
> 1.7.4.1
>
-- PMM
[Qemu-devel] [RFC][PATCH v2 3/4] tcg: add optimized TCG qemu_ld/st generation, Yeongkyoon Lee, 2012/07/05
[Qemu-devel] [RFC][PATCH v2 4/4] configure: add CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization, Yeongkyoon Lee, 2012/07/05