[Qemu-devel] [PATCH 2/5] scsi: Fix LOAD_UNLOAD

[Christian Borntraeger]

From: Christian Hoff <address@hidden>

Change operation code of LOAD_UNLOAD command to 0x1b as described in
section 7.3 of the SCSI Stream Commands spec.

Signed-off-by: Christian Hoff <address@hidden>
Signed-off-by: Christian Borntraeger <address@hidden>
---
 hw/scsi-bus.c  |    6 +++---
 hw/scsi-defs.h |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index d1779a2..0e484d2 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -721,7 +721,6 @@ static int scsi_req_length(SCSICommand *cmd, SCSIDevice 
*dev, uint8_t *buf)
     case SYNCHRONIZE_CACHE_16:
     case LOCATE_16:
     case LOCK_UNLOCK_CACHE:
-    case LOAD_UNLOAD:
     case SET_CD_SPEED:
     case SET_LIMITS:
     case WRITE_LONG_10:
@@ -833,7 +832,7 @@ static int scsi_req_stream_length(SCSICommand *cmd, 
SCSIDevice *dev, uint8_t *bu
         }
         break;
     case REWIND:
-    case START_STOP:
+    case LOAD_UNLOAD:
         cmd->len = 6;
         cmd->xfer = 0;
         break;
@@ -1128,7 +1127,8 @@ static const char *scsi_command_name(uint8_t cmd)
         [ COPY                     ] = "COPY",
         [ ERASE                    ] = "ERASE",
         [ MODE_SENSE               ] = "MODE_SENSE",
-        [ START_STOP               ] = "START_STOP",
+        [ START_STOP               ] = "START_STOP/LOAD_UNLOAD",
+        /* LOAD_UNLOAD and START_STOP use the same operation code */
         [ RECEIVE_DIAGNOSTIC       ] = "RECEIVE_DIAGNOSTIC",
         [ SEND_DIAGNOSTIC          ] = "SEND_DIAGNOSTIC",
         [ ALLOW_MEDIUM_REMOVAL     ] = "ALLOW_MEDIUM_REMOVAL",
diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h
index 354ed7b..2b0db4b 100644
--- a/hw/scsi-defs.h
+++ b/hw/scsi-defs.h
@@ -44,6 +44,7 @@
 #define COPY                  0x18
 #define ERASE                 0x19
 #define MODE_SENSE            0x1a
+#define LOAD_UNLOAD           0x1b
 #define START_STOP            0x1b
 #define RECEIVE_DIAGNOSTIC    0x1c
 #define SEND_DIAGNOSTIC       0x1d
@@ -114,7 +115,6 @@
 #define MAINTENANCE_IN        0xa3
 #define MAINTENANCE_OUT       0xa4
 #define MOVE_MEDIUM           0xa5
-#define LOAD_UNLOAD           0xa6
 #define SET_READ_AHEAD        0xa7
 #define READ_12               0xa8
 #define WRITE_12              0xaa
-- 
1.7.0.4