[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug |
Date: |
Wed, 23 May 2012 17:12:16 +0300 |
On Wed, May 23, 2012 at 09:52:06PM +0800, Kelvin Wang wrote:
> Support the virtio-scsi-pci adapter hot-plug. However, this patch can only
> make
> adapter hot-plugable. More effort is needed for LUN hot-plug. Actually, that
> is
> the most valuable feature to virtio-scsi.
>
> Following the steps as follows can give an intuitive understanding of this
> feature after applying the patch to QEMU v1.1.0-rc3.
>
> 1, Generate a image file:
> qemu-img create -f qcow2 test.img 2G
>
> 2, Run qemu with the option -monitor.
>
> 3, In the guest, insert necessary modules:
> for m in acpiphp pci_hotplug; do sudo modprobe ${m}; done
>
> 4, In the qemu monitor,hot add a virtio-scsi-pci adapter:
> (qemu)pci_add auto storage if=virtio-scsi-pci
>
> 5, Check whether the controller was added:
> Guest: lspci
> Qemu: (qemu)info qtree
>
> Signed-off-by: Kelvin Wang <address@hidden>
> Signed-off-by: Sheng Liu <address@hidden>
NAK
Do not use pci_add. It is a compatibility command.
Use the new style device_add.
Same for if=.
I think you won't need any changes then?
> ---
> blockdev.c | 19 +++++++++++++++----
> blockdev.h | 3 ++-
> hw/pci-hotplug.c | 15 +++++++++++++++
> 3 files changed, 32 insertions(+), 5 deletions(-)
>
> diff --git a/blockdev.c b/blockdev.c
> index 67895b2..ecb82bf 100644
> --- a/blockdev.c
> +++ b/blockdev.c
> @@ -31,6 +31,7 @@ static const char *const if_name[IF_COUNT] = {
> [IF_MTD] = "mtd",
> [IF_SD] = "sd",
> [IF_VIRTIO] = "virtio",
> + [IF_VIRTIO_SCSI] = "virtio-scsi",
weird indentation
> [IF_XEN] = "xen",
> };
>
I think blockdev is a legacy thing. You are
supposed to use the new style device-add. No?
> @@ -436,7 +437,8 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
>
> on_write_error = BLOCK_ERR_STOP_ENOSPC;
> if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
> - if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type
> != IF_NONE) {
> + if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO &&
> + type != IF_VIRTIO_SCSI && type != IF_NONE) {
code dupicated here and below. add a function?
> error_report("werror is not supported by this bus type");
> return NULL;
> }
> @@ -449,7 +451,8 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
>
> on_read_error = BLOCK_ERR_REPORT;
> if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
> - if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI && type
> != IF_NONE) {
> + if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI &&
> + IF_VIRTIO_SCSI && type != IF_NONE) {
typo? IF_VIRTIO_SCSI is always != 0 ...
> error_report("rerror is not supported by this bus type");
> return NULL;
> }
> @@ -461,7 +464,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
> }
>
> if ((devaddr = qemu_opt_get(opts, "addr")) != NULL) {
> - if (type != IF_VIRTIO) {
> + if (type != IF_VIRTIO || type != IF_VIRTIO_SCSI) {
> error_report("addr is not supported by this bus type");
> return NULL;
> }
> @@ -579,6 +582,14 @@ DriveInfo *drive_init(QemuOpts *opts, int
> default_to_scsi)
> if (devaddr)
> qemu_opt_set(opts, "addr", devaddr);
> break;
> + case IF_VIRTIO_SCSI:
> + opts = qemu_opts_create(qemu_find_opts("device"), NULL, 0);
> + qemu_opt_set(opts, "driver", "virtio-scsi-pci");
> + qemu_opt_set(opts, "drive", dinfo->id);
> + if (devaddr) {
> + qemu_opt_set(opts, "addr", devaddr);
> + }
> + break;
> default:
> abort();
> }
> @@ -604,7 +615,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
> ro = 1;
> } else if (ro == 1) {
> if (type != IF_SCSI && type != IF_VIRTIO && type != IF_FLOPPY &&
> - type != IF_NONE && type != IF_PFLASH) {
> + type != IF_NONE && type != IF_PFLASH && IF_VIRTIO_SCSI) {
> error_report("readonly not supported by this bus type");
> goto err;
> }
> diff --git a/blockdev.h b/blockdev.h
> index 260e16b..96f40a5 100644
> --- a/blockdev.h
> +++ b/blockdev.h
> @@ -22,7 +22,8 @@ void blockdev_auto_del(BlockDriverState *bs);
> typedef enum {
> IF_DEFAULT = -1, /* for use with drive_add() only */
> IF_NONE,
> - IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD, IF_VIRTIO, IF_XEN,
> + IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD, IF_VIRTIO, IF_XEN,
> + IF_VIRTIO_SCSI,
weird indentation
> IF_COUNT
> } BlockInterfaceType;
>
> diff --git a/hw/pci-hotplug.c b/hw/pci-hotplug.c
> index c55d8b9..4f5c022 100644
> --- a/hw/pci-hotplug.c
> +++ b/hw/pci-hotplug.c
> @@ -154,6 +154,8 @@ static PCIDevice *qemu_pci_hot_add_storage(Monitor *mon,
> type = IF_SCSI;
> else if (!strcmp(buf, "virtio")) {
> type = IF_VIRTIO;
> + } else if (!strcmp(buf, "virtio-scsi")) {
> + type = IF_VIRTIO_SCSI;
> } else {
> monitor_printf(mon, "type %s not a hotpluggable PCI device.\n",
> buf);
> return NULL;
> @@ -211,6 +213,19 @@ static PCIDevice *qemu_pci_hot_add_storage(Monitor *mon,
> if (qdev_init(&dev->qdev) < 0)
> dev = NULL;
> break;
> + case IF_VIRTIO_SCSI:
> + dev = pci_create(bus, devfn, "virtio-scsi-pci");
> + if (qdev_init(&dev->qdev) < 0) {
> + dev = NULL;
> + }
> +
> + if (dev && dinfo) {
> + if (scsi_hot_add(mon, &dev->qdev, dinfo, 0) != 0) {
> + qdev_unplug(&dev->qdev, NULL);
> + dev = NULL;
> + }
> + }
> + break;
> default:
> dev = NULL;
> }
Here I am sure.
Do not keep adding stuff to pci-hotplug.
New devices should use device-add.
> --
> 1.7.1
- [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Kelvin Wang, 2012/05/23
- Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug,
Michael S. Tsirkin <=
- Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Paolo Bonzini, 2012/05/23
- Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Michael S. Tsirkin, 2012/05/23
- Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Kelvin Wang, 2012/05/24
- Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Michael S. Tsirkin, 2012/05/24
- Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Paolo Bonzini, 2012/05/24
- Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Kelvin Wang, 2012/05/24
- Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Stefan Hajnoczi, 2012/05/25
Re: [Qemu-devel] [PATCH] Support virtio-scsi-pci adapter hot-plug, Kelvin Wang, 2012/05/24