[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 992067] Re: Windows 2008R2 very slow cold boot when >4
From: |
Matthew Anderson |
Subject: |
[Qemu-devel] [Bug 992067] Re: Windows 2008R2 very slow cold boot when >4GB memory |
Date: |
Mon, 30 Apr 2012 20:14:41 -0000 |
Thanks for the quick reply,
I pulled the latest version from Git and on first attempt it said the
hv_relaxed feature was not present. I checked the source and the
'hv_relaxed' feature was not included in a 'feature_name' array so the
flag was being discarded before it could be enabled.
Once added in to the 'feature_name' array it was enabled but the VM
crashes on boot with a blue screen and the error message
"Phase0_exception" followed by a reboot.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/992067
Title:
Windows 2008R2 very slow cold boot when >4GB memory
Status in QEMU:
Fix Committed
Bug description:
I've been having a consistent problem booting 2008R2 guests with
4096MB of RAM or greater. On the initial boot the KVM process starts
out with a ~200MB memory allocation and will use 100% of all CPU
allocated to it. The RES memory of the KVM process slowly rises by
around 200mb every few minutes until it reaches it's memory allocation
(several hours in some cases). Whilst this is happening the guest will
usually blue screen with the message of -
A clock interrupt was not received on a secondary processor within the
allocated time interval
If I let the KVM process continue to run it will eventually allocate
the required memory the guest will run at full speed, usually
restarting after the blue screen and booting into startup repair. From
here you can restart it and it will boot perfectly. Once booted the
guest has no performance issues at all.
I've tried everything I could think of. Removing PAE, playing with
huge pages, different kernels, different userspaces, different
systems, different backing file systems, different processor feature
set, with or without Virtio etc. My best theory is that the problem is
caused by Windows 2008 zeroing out all the memory on boot and
something is causing this to be held up or slowed to a crawl. The
hosts always have memory free to boot the guest and are not using swap
at all.
Nothing so far has solved the issue. A few observations I've made about the
issue are -
Large memory 2008R2 guests seem to boot fine (or with a small delay) when
they are the first to boot on the host after a reboot
Sometimes dropping the disk cache (echo 1 > /proc/sys/vm/drop_caches) will
cause them to boot faster
The hosts I've tried are -
All Nehalem based (5540, 5620 and 5660)
Host ram of 48GB, 96GB and 192GB
Storage on NFS, Gluster and local (ext4, xfs and zfs)
QED, QCOW and RAW formats
Scientific Linux 6.1 with the standard kernel 2.6.32, 2.6.38 and 3.3.1
KVM userspaces 0.12, 0.14 and (currently) 0.15.1
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/992067/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |