qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v7 4/4] use inet_listen()/inet_connect() to supp


From: Michael Roth
Subject: Re: [Qemu-devel] [PATCH v7 4/4] use inet_listen()/inet_connect() to support ipv6 migration
Date: Thu, 19 Apr 2012 21:05:14 -0500
User-agent: Mutt/1.5.21 (2010-09-15)

On Thu, Apr 19, 2012 at 03:11:54PM +0800, Amos Kong wrote:
> Use help functions in qemu-socket.c for tcp migration,
> which already support ipv6 addresses.
> 
> Currently errp will be set to UNDEFINED_ERROR when migration fails,
> qemu would output "migration failed: ...", and current user can
> see a message("An undefined error has occurred") in monitor.
> 
> This patch changed tcp_start_outgoing_migration()/inet_connect()
> /inet_connect_opts(), socket error would be passed back,
> then current user can see a meaningful err message in monitor.
> 
> Qemu will exit if listening fails, so output socket error
> to qemu stderr.
> 
> For IPv6 brackets must be mandatory if you require a port.
> Referencing to RFC5952, the recommended format is:
>   [2312::8274]:5200
> 
> test status: Successed
> listen side: qemu-kvm .... -incoming tcp:[2312::8274]:5200
> client side: qemu-kvm ...
>              (qemu) migrate -d tcp:[2312::8274]:5200
> 
> Signed-off-by: Amos Kong <address@hidden>
> ---
>  migration-tcp.c |   74 
> +++++++++++++------------------------------------------
>  migration.c     |   14 ++++++----
>  migration.h     |    7 +++--
>  vl.c            |    6 ++++
>  4 files changed, 35 insertions(+), 66 deletions(-)
> 
> diff --git a/migration-tcp.c b/migration-tcp.c
> index 35a5781..f103f9a 100644
> --- a/migration-tcp.c
> +++ b/migration-tcp.c
> @@ -79,45 +79,29 @@ static void tcp_wait_for_connect(void *opaque)
>      }
>  }
> 
> -int tcp_start_outgoing_migration(MigrationState *s, const char *host_port)
> +int tcp_start_outgoing_migration(MigrationState *s, const char *host_port,
> +                                 Error **errp)
>  {
> -    struct sockaddr_in addr;
> -    int ret;
> -
> -    ret = parse_host_port(&addr, host_port);
> -    if (ret < 0) {
> -        return ret;
> -    }
> -
>      s->get_error = socket_errno;
>      s->write = socket_write;
>      s->close = tcp_close;
> 
> -    s->fd = qemu_socket(PF_INET, SOCK_STREAM, 0);
> -    if (s->fd == -1) {
> -        DPRINTF("Unable to open socket");
> -        return -socket_error();
> -    }
> -
> -    socket_set_nonblock(s->fd);
> -
> -    do {
> -        ret = connect(s->fd, (struct sockaddr *)&addr, sizeof(addr));
> -        if (ret == -1) {
> -            ret = -socket_error();
> -        }
> -        if (ret == -EINPROGRESS || ret == -EWOULDBLOCK) {
> -            qemu_set_fd_handler2(s->fd, NULL, NULL, tcp_wait_for_connect, s);
> -            return 0;
> -        }
> -    } while (ret == -EINTR);
> +    s->fd = inet_connect(host_port, false, errp);
> 
> -    if (ret < 0) {
> +    if (error_is_type(*errp, QERR_SOCKET_CONNECT_IN_PROGRESS)) {
> +        DPRINTF("connect in progress\n");
> +        qemu_set_fd_handler2(s->fd, NULL, NULL, tcp_wait_for_connect, s);
> +    } else if (error_is_type(*errp, QERR_SOCKET_CREATE_FAILED)) {
> +        DPRINTF("connect failed\n");
> +        return -1;
> +    } else if (error_is_type(*errp, QERR_SOCKET_CONNECT_FAILED)) {
>          DPRINTF("connect failed\n");
>          migrate_fd_error(s);
> -        return ret;
> +        return -1;
> +    } else {
> +        migrate_fd_connect(s);
>      }

Would be better to do:

if (!error_is_set(err)) {
    migrate_fd_connect(s);
} else {
    if (error_is_type(*errp, QERR_SOCKET_CONNECT_IN_PROGRESS)) {
    } else if (...) {
        ...
    } else {
        <unknown error>
    }
}

Since additional error cases may be added in the future.

> -    migrate_fd_connect(s);
> +
>      return 0;
>  }
> 
> @@ -155,40 +139,18 @@ out2:
>      close(s);
>  }
> 
> -int tcp_start_incoming_migration(const char *host_port)
> +int tcp_start_incoming_migration(const char *host_port, Error **errp)
>  {
> -    struct sockaddr_in addr;
> -    int val;
>      int s;
> 
> -    DPRINTF("Attempting to start an incoming migration\n");
> -
> -    if (parse_host_port(&addr, host_port) < 0) {
> -        fprintf(stderr, "invalid host/port combination: %s\n", host_port);
> -        return -EINVAL;
> -    }
> -
> -    s = qemu_socket(PF_INET, SOCK_STREAM, 0);
> -    if (s == -1) {
> -        return -socket_error();
> -    }
> -
> -    val = 1;
> -    setsockopt(s, SOL_SOCKET, SO_REUSEADDR, (const char *)&val, sizeof(val));
> +    s = inet_listen(host_port, NULL, 256, SOCK_STREAM, 0, errp);
> 
> -    if (bind(s, (struct sockaddr *)&addr, sizeof(addr)) == -1) {
> -        goto err;
> -    }
> -    if (listen(s, 1) == -1) {
> -        goto err;
> +    if (s < 0) {
> +        return -1;
>      }
> 
>      qemu_set_fd_handler2(s, NULL, tcp_accept_incoming_migration, NULL,
>                           (void *)(intptr_t)s);
> 
>      return 0;
> -
> -err:
> -    close(s);
> -    return -socket_error();
>  }
> diff --git a/migration.c b/migration.c
> index 94f7839..6289bc7 100644
> --- a/migration.c
> +++ b/migration.c
> @@ -60,13 +60,13 @@ static MigrationState *migrate_get_current(void)
>      return &current_migration;
>  }
> 
> -int qemu_start_incoming_migration(const char *uri)
> +int qemu_start_incoming_migration(const char *uri, Error **errp)
>  {
>      const char *p;
>      int ret;
> 
>      if (strstart(uri, "tcp:", &p))
> -        ret = tcp_start_incoming_migration(p);
> +        ret = tcp_start_incoming_migration(p, errp);
>  #if !defined(WIN32)
>      else if (strstart(uri, "exec:", &p))
>          ret =  exec_start_incoming_migration(p);
> @@ -413,7 +413,7 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
>      s = migrate_init(blk, inc);
> 
>      if (strstart(uri, "tcp:", &p)) {
> -        ret = tcp_start_outgoing_migration(s, p);
> +        ret = tcp_start_outgoing_migration(s, p, errp);
>  #if !defined(WIN32)
>      } else if (strstart(uri, "exec:", &p)) {
>          ret = exec_start_outgoing_migration(s, p);
> @@ -428,9 +428,11 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
>      }
> 
>      if (ret < 0) {
> -        DPRINTF("migration failed: %s\n", strerror(-ret));
> -        /* FIXME: we should return meaningful errors */
> -        error_set(errp, QERR_UNDEFINED_ERROR);
> +        if (!error_is_set(errp)) {
> +            DPRINTF("migration failed: %s\n", strerror(-ret));
> +            /* FIXME: we should return meaningful errors */
> +            error_set(errp, QERR_UNDEFINED_ERROR);
> +        }
>          return;
>      }
> 
> diff --git a/migration.h b/migration.h
> index 691b367..2e9ca2e 100644
> --- a/migration.h
> +++ b/migration.h
> @@ -37,7 +37,7 @@ struct MigrationState
> 
>  void process_incoming_migration(QEMUFile *f);
> 
> -int qemu_start_incoming_migration(const char *uri);
> +int qemu_start_incoming_migration(const char *uri, Error **errp);
> 
>  uint64_t migrate_max_downtime(void);
> 
> @@ -49,9 +49,10 @@ int exec_start_incoming_migration(const char *host_port);
> 
>  int exec_start_outgoing_migration(MigrationState *s, const char *host_port);
> 
> -int tcp_start_incoming_migration(const char *host_port);
> +int tcp_start_incoming_migration(const char *host_port, Error **errp);
> 
> -int tcp_start_outgoing_migration(MigrationState *s, const char *host_port);
> +int tcp_start_outgoing_migration(MigrationState *s, const char *host_port,
> +                                 Error **errp);
> 
>  int unix_start_incoming_migration(const char *path);
> 
> diff --git a/vl.c b/vl.c
> index ae91a8a..c10dfc2 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -3627,8 +3627,12 @@ int main(int argc, char **argv, char **envp)
>      }
> 
>      if (incoming) {
> -        int ret = qemu_start_incoming_migration(incoming);
> +        Error *errp = NULL;
> +        int ret = qemu_start_incoming_migration(incoming, &errp);
>          if (ret < 0) {
> +            if (error_is_set(&errp)) {
> +                fprintf(stderr, "Migrate: %s\n", error_get_pretty(errp));
> +            }
>              fprintf(stderr, "Migration failed. Exit code %s(%d), exiting.\n",
>                      incoming, ret);
>              exit(ret);
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]