qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC PATCH 2/3] iommu: Create basic group infrastructur


From: Alex Williamson
Subject: Re: [Qemu-devel] [RFC PATCH 2/3] iommu: Create basic group infrastructure and update AMD-Vi & Intel VT-d
Date: Wed, 18 Apr 2012 14:28:43 -0600

On Wed, 2012-04-18 at 21:55 +1000, David Gibson wrote:
> On Mon, Apr 02, 2012 at 03:14:46PM -0600, Alex Williamson wrote:
> > IOMMU groups define the minimum granularity of the IOMMU.  We therefore
> > create groups using a dma_dev which is the effective requestor ID for
> > the entire group.  Additional devices can be added to groups based on
> > system topology, IOMMU limitations, or device quirks.
> > 
> > This implementation also includes a simple idr database for creating
> > a flat address space of group IDs across multiple IOMMUs.  Updates
> > included for Intel VT-d, using example iommu callbacks for adding and
> > removing devices, as well as AMD-Vi, which tracks devices on it's own.
> > We should be able to better integrate the iommu_group within existing
> > AMD-Vi structs or provide a private data location within the iommu_group
> > where we can eventually reduce redundancy.
> > 
> > Signed-off-by: Alex Williamson <address@hidden>
> 
> Looks reasonable as far as it goes.  This still lacks an obvious means
> for doing group assignment of devices on busses subordinate to devices
> that are on iommu managed busses.  Which as we discussed earlier is a
> bit of a can of worms, but necessary.

Yes, this was a big can of worms in my isolation group attempt.  I'm
hoping it's easier here.  Perhaps the iommu core needs to register add
device notifiers for every bus and for each new device without a direct
iommu, walk up the device tree and add it as a hidden device in the
first iommu group it finds.  Nested iommus also throw a serious wrench
into the problem, but as we've discussed, are probably safe to ignore.

> > ---
> > 
> >  drivers/iommu/amd_iommu.c   |   50 ++++++-----
> >  drivers/iommu/intel-iommu.c |   76 +++++++++--------
> >  drivers/iommu/iommu.c       |  198 
> > ++++++++++++++++++++++++++++++++++++++-----
> >  include/linux/iommu.h       |   23 +++++
> >  4 files changed, 267 insertions(+), 80 deletions(-)
> > 
> > diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> > index f75e060..876db28 100644
> > --- a/drivers/iommu/amd_iommu.c
> > +++ b/drivers/iommu/amd_iommu.c
> > @@ -256,9 +256,10 @@ static bool check_device(struct device *dev)
> >  
> >  static int iommu_init_device(struct device *dev)
> >  {
> > -   struct pci_dev *pdev = to_pci_dev(dev);
> > +   struct pci_dev *dma_pdev, *pdev = to_pci_dev(dev);
> >     struct iommu_dev_data *dev_data;
> >     u16 alias;
> > +   int ret;
> >  
> >     if (dev->archdata.iommu)
> >             return 0;
> > @@ -279,6 +280,26 @@ static int iommu_init_device(struct device *dev)
> >                     return -ENOTSUPP;
> >             }
> >             dev_data->alias_data = alias_data;
> > +
> > +           dma_pdev = pci_get_bus_and_slot(alias >> 8, alias & 0xff);
> > +   } else
> > +           dma_pdev = pdev;
> > +
> > +   /* dma_pdev = iommu_pci_quirk(dma_pdev) */
> 
> Presumably an actual implementation of the quirk is coming?  It might

Yeah, I can add a simple one.  It may also be a good place to implement
any kind of global policy, like grouping multifunction devices or
enforcing PCI ACS.  Once we have that, I hope we could just add some
kind of get/set iommudata to the group that might allow dma_ops to start
making use of groups.

> be an idea for it to take both the individual and representative
> devices, in case that information is useful.

Ok.

> > +   if (!dma_pdev->dev.iommu_group) {
> > +           struct iommu_group *group;
> > +
> > +           group = iommu_group_alloc(&dma_pdev->dev);
> > +           if (IS_ERR(group))
> > +                   return PTR_ERR(group);
> > +   }
> > +
> > +   ret = iommu_group_add_device(dma_pdev->dev.iommu_group, dev);
> > +   if (ret) {
> > +           if (iommu_group_empty(dma_pdev->dev.iommu_group))
> > +                   iommu_group_free(dma_pdev->dev.iommu_group);
> > +           return ret;
> 
> It might be nice to have generic helpers that do this kind of lifetime
> handling of the groups, but that's a detail.

I've cleaned this up a lot in my working version, using kobject
references makes this much better.

> >     }
> >  
> >     if (pci_iommuv2_capable(pdev)) {
> > @@ -309,6 +330,12 @@ static void iommu_ignore_device(struct device *dev)
> >  
> >  static void iommu_uninit_device(struct device *dev)
> >  {
> > +   struct iommu_group *group = dev->iommu_group;
> > +
> > +   iommu_group_remove_device(dev);
> > +   if (iommu_group_empty(group))
> > +           iommu_group_free(group);
> > +
> >     /*
> >      * Nothing to do here - we keep dev_data around for unplugged devices
> >      * and reuse it when the device is re-plugged - not doing so would
> > @@ -3191,26 +3218,6 @@ static int amd_iommu_domain_has_cap(struct 
> > iommu_domain *domain,
> >     return 0;
> >  }
> >  
> > -static int amd_iommu_device_group(struct device *dev, unsigned int 
> > *groupid)
> > -{
> > -   struct iommu_dev_data *dev_data = dev->archdata.iommu;
> > -   struct pci_dev *pdev = to_pci_dev(dev);
> > -   u16 devid;
> > -
> > -   if (!dev_data)
> > -           return -ENODEV;
> > -
> > -   if (pdev->is_virtfn || !iommu_group_mf)
> > -           devid = dev_data->devid;
> > -   else
> > -           devid = calc_devid(pdev->bus->number,
> > -                              PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
> > -
> > -   *groupid = amd_iommu_alias_table[devid];
> > -
> > -   return 0;
> > -}
> > -
> >  static struct iommu_ops amd_iommu_ops = {
> >     .domain_init = amd_iommu_domain_init,
> >     .domain_destroy = amd_iommu_domain_destroy,
> > @@ -3220,7 +3227,6 @@ static struct iommu_ops amd_iommu_ops = {
> >     .unmap = amd_iommu_unmap,
> >     .iova_to_phys = amd_iommu_iova_to_phys,
> >     .domain_has_cap = amd_iommu_domain_has_cap,
> > -   .device_group = amd_iommu_device_group,
> >     .pgsize_bitmap  = AMD_IOMMU_PGSIZES,
> >  };
> >  
> > diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
> > index c9c6053..41ab7d0 100644
> > --- a/drivers/iommu/intel-iommu.c
> > +++ b/drivers/iommu/intel-iommu.c
> > @@ -4075,54 +4075,59 @@ static int intel_iommu_domain_has_cap(struct 
> > iommu_domain *domain,
> >     return 0;
> >  }
> >  
> > -/*
> > - * Group numbers are arbitrary.  Device with the same group number
> > - * indicate the iommu cannot differentiate between them.  To avoid
> > - * tracking used groups we just use the seg|bus|devfn of the lowest
> > - * level we're able to differentiate devices
> > - */
> > -static int intel_iommu_device_group(struct device *dev, unsigned int 
> > *groupid)
> > +static int intel_iommu_add_device(struct device *dev)
> >  {
> >     struct pci_dev *pdev = to_pci_dev(dev);
> > -   struct pci_dev *bridge;
> > -   union {
> > -           struct {
> > -                   u8 devfn;
> > -                   u8 bus;
> > -                   u16 segment;
> > -           } pci;
> > -           u32 group;
> > -   } id;
> > -
> > -   if (iommu_no_mapping(dev))
> > -           return -ENODEV;
> > -
> > -   id.pci.segment = pci_domain_nr(pdev->bus);
> > -   id.pci.bus = pdev->bus->number;
> > -   id.pci.devfn = pdev->devfn;
> > +   struct pci_dev *bridge, *dma_pdev = pdev;
> > +   int ret;
> >  
> > -   if (!device_to_iommu(id.pci.segment, id.pci.bus, id.pci.devfn))
> > +   if (!device_to_iommu(pci_domain_nr(pdev->bus),
> > +                        pdev->bus->number, pdev->devfn))
> >             return -ENODEV;
> >  
> >     bridge = pci_find_upstream_pcie_bridge(pdev);
> >     if (bridge) {
> > -           if (pci_is_pcie(bridge)) {
> > -                   id.pci.bus = bridge->subordinate->number;
> > -                   id.pci.devfn = 0;
> > -           } else {
> > -                   id.pci.bus = bridge->bus->number;
> > -                   id.pci.devfn = bridge->devfn;
> > -           }
> > +           if (pci_is_pcie(bridge))
> > +                   dma_pdev = pci_get_domain_bus_and_slot(
> > +                                           pci_domain_nr(pdev->bus),
> > +                                           bridge->subordinate->number, 0);
> > +           else
> > +                   dma_pdev = bridge;
> > +   }
> > +
> > +   if (!bridge && !pdev->is_virtfn && iommu_group_mf)
> > +           dma_pdev = pci_get_slot(dma_pdev->bus, 0);
> > +
> > +   /* dma_pdev = iommu_pci_quirk(dma_pdev); */
> > +
> > +   if (!dma_pdev->dev.iommu_group) {
> > +           struct iommu_group *group;
> > +
> > +           group = iommu_group_alloc(&dma_pdev->dev);
> > +           if (IS_ERR(group))
> > +                   return PTR_ERR(group);
> >     }
> >  
> > -   if (!pdev->is_virtfn && iommu_group_mf)
> > -           id.pci.devfn = PCI_DEVFN(PCI_SLOT(id.pci.devfn), 0);
> > +   ret = iommu_group_add_device(dma_pdev->dev.iommu_group, dev);
> > +   if (ret) {
> > +           if (iommu_group_empty(dma_pdev->dev.iommu_group))
> > +                   iommu_group_free(dma_pdev->dev.iommu_group);
> >  
> > -   *groupid = id.group;
> > +           return ret;
> > +   }
> >  
> >     return 0;
> >  }
> >  
> > +static void intel_iommu_remove_device(struct device *dev)
> > +{
> > +   struct iommu_group *group = dev->iommu_group;
> > +
> > +   iommu_group_remove_device(dev);
> > +   if (iommu_group_empty(group))
> > +           iommu_group_free(group);
> > +}
> > +
> >  static struct iommu_ops intel_iommu_ops = {
> >     .domain_init    = intel_iommu_domain_init,
> >     .domain_destroy = intel_iommu_domain_destroy,
> > @@ -4132,7 +4137,8 @@ static struct iommu_ops intel_iommu_ops = {
> >     .unmap          = intel_iommu_unmap,
> >     .iova_to_phys   = intel_iommu_iova_to_phys,
> >     .domain_has_cap = intel_iommu_domain_has_cap,
> > -   .device_group   = intel_iommu_device_group,
> > +   .add_device     = intel_iommu_add_device,
> > +   .remove_device  = intel_iommu_remove_device,
> >     .pgsize_bitmap  = INTEL_IOMMU_PGSIZES,
> >  };
> >  
> > diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> > index 2198b2d..6a51ed9 100644
> > --- a/drivers/iommu/iommu.c
> > +++ b/drivers/iommu/iommu.c
> > @@ -26,48 +26,96 @@
> >  #include <linux/slab.h>
> >  #include <linux/errno.h>
> >  #include <linux/iommu.h>
> > +#include <linux/idr.h>
> >  
> > -static ssize_t show_iommu_group(struct device *dev,
> > -                           struct device_attribute *attr, char *buf)
> > +static struct kset *iommu_group_kset;
> > +static struct idr iommu_group_idr;
> > +static struct mutex iommu_group_mutex;
> > +
> > +struct iommu_group_attribute {
> > +   struct attribute attr;
> > +   ssize_t (*show)(struct iommu_group *group, char *buf);
> > +   ssize_t (*store)(struct iommu_group *group,
> > +                    const char *buf, size_t count);
> > +};
> > +
> > +#define to_iommu_group_attr(_attr) \
> > +   container_of(_attr, struct iommu_group_attribute, attr)
> > +#define to_iommu_group(_kobj)              \
> > +   container_of(_kobj, struct iommu_group, kobj)
> > +
> > +static ssize_t iommu_group_attr_show(struct kobject *kobj,
> > +                                struct attribute *__attr, char *buf)
> >  {
> > -   unsigned int groupid;
> > +   struct iommu_group_attribute *attr = to_iommu_group_attr(__attr);
> > +   struct iommu_group *group = to_iommu_group(kobj);
> > +   ssize_t ret = -EIO;
> >  
> > -   if (iommu_device_group(dev, &groupid))
> > -           return 0;
> > +   if (attr->show)
> > +           ret = attr->show(group, buf);
> > +   return ret;
> > +}
> > +
> > +static ssize_t iommu_group_attr_store(struct kobject *kobj,
> > +                                 struct attribute *__attr,
> > +                                 const char *buf, size_t count)
> > +{
> > +   struct iommu_group_attribute *attr = to_iommu_group_attr(__attr);
> > +   struct iommu_group *group = to_iommu_group(kobj);
> > +   ssize_t ret = -EIO;
> >  
> > -   return sprintf(buf, "%u", groupid);
> > +   if (attr->store)
> > +           ret = attr->store(group, buf, count);
> > +   return ret;
> >  }
> > -static DEVICE_ATTR(iommu_group, S_IRUGO, show_iommu_group, NULL);
> >  
> > -static int add_iommu_group(struct device *dev, void *data)
> > +static void iommu_group_release(struct kobject *kobj)
> >  {
> > -   unsigned int groupid;
> > +   struct iommu_group *group = to_iommu_group(kobj);
> >  
> > -   if (iommu_device_group(dev, &groupid) == 0)
> > -           return device_create_file(dev, &dev_attr_iommu_group);
> > +   mutex_lock(&iommu_group_mutex);
> > +   idr_remove(&iommu_group_idr, group->id);
> > +   mutex_unlock(&iommu_group_mutex);
> >  
> > -   return 0;
> > +   kfree(group);
> >  }
> >  
> > -static int remove_iommu_group(struct device *dev)
> > +static const struct sysfs_ops iommu_group_sysfs_ops = {
> > +   .show = iommu_group_attr_show,
> > +   .store = iommu_group_attr_store,
> > +};
> > +
> > +static struct kobj_type iommu_group_ktype = {
> > +   .sysfs_ops = &iommu_group_sysfs_ops,
> > +   .release = iommu_group_release,
> > +};
> > +
> > +static int add_iommu_group(struct device *dev, void *data)
> >  {
> > -   unsigned int groupid;
> > +   struct iommu_ops *ops = data;
> >  
> > -   if (iommu_device_group(dev, &groupid) == 0)
> > -           device_remove_file(dev, &dev_attr_iommu_group);
> > +   if (!ops->add_device)
> > +           return -ENODEV;
> >  
> > -   return 0;
> > +   WARN_ON(dev->iommu_group);
> > +
> > +   return ops->add_device(dev);
> >  }
> >  
> >  static int iommu_device_notifier(struct notifier_block *nb,
> >                              unsigned long action, void *data)
> >  {
> >     struct device *dev = data;
> > +   struct iommu_ops *ops = dev->bus->iommu_ops;
> >  
> >     if (action == BUS_NOTIFY_ADD_DEVICE)
> > -           return add_iommu_group(dev, NULL);
> > -   else if (action == BUS_NOTIFY_DEL_DEVICE)
> > -           return remove_iommu_group(dev);
> > +           return add_iommu_group(dev, ops);
> > +   else if (action == BUS_NOTIFY_DEL_DEVICE) {
> > +           if (ops->remove_device && dev->iommu_group) {
> > +                   ops->remove_device(dev);
> > +                   return 0;
> > +           }
> > +   }
> >  
> >     return 0;
> >  }
> > @@ -79,7 +127,97 @@ static struct notifier_block iommu_device_nb = {
> >  static void iommu_bus_init(struct bus_type *bus, struct iommu_ops *ops)
> >  {
> >     bus_register_notifier(bus, &iommu_device_nb);
> > -   bus_for_each_dev(bus, NULL, NULL, add_iommu_group);
> > +   bus_for_each_dev(bus, NULL, ops, add_iommu_group);
> > +}
> > +
> > +struct iommu_group *iommu_group_alloc(struct device *dma_dev)
> > +{
> > +   struct iommu_group *group;
> > +   int ret;
> > +
> > +   group = kzalloc(sizeof(*group), GFP_KERNEL);
> > +   if (!group)
> > +           return ERR_PTR(-ENOMEM);
> > +
> > +   group->kobj.kset = iommu_group_kset;
> > +   group->dma_dev = dma_dev;
> > +   atomic_set(&group->refcnt, 0);
> > +
> > +   mutex_lock(&iommu_group_mutex);
> > +
> > +again:
> > +   if (unlikely(0 == idr_pre_get(&iommu_group_idr, GFP_KERNEL))) {
> > +           kfree(group);
> > +           mutex_unlock(&iommu_group_mutex);
> > +           return ERR_PTR(-ENOMEM);
> > +   }
> > +
> > +   if (-EAGAIN == idr_get_new(&iommu_group_idr, group, &group->id))
> > +           goto again;
> > +
> > +   mutex_unlock(&iommu_group_mutex);
> > +
> > +   ret = kobject_init_and_add(&group->kobj, &iommu_group_ktype,
> > +                              NULL, "%d", group->id);
> > +   if (ret) {
> > +           iommu_group_release(&group->kobj);
> > +           return ERR_PTR(ret);
> > +   }
> > +
> > +   group->devices_kobj = kobject_create_and_add("devices", &group->kobj);
> > +        if (!group->devices_kobj) {
> > +           kobject_put(&group->kobj);
> > +           return ERR_PTR(-ENOMEM);
> > +   }
> > +
> > +   dma_dev->iommu_group = group;
> > +
> > +   return group;
> > +}
> > +
> > +void iommu_group_free(struct iommu_group *group)
> > +{
> > +   group->dma_dev->iommu_group = NULL;
> > +   WARN_ON(atomic_read(&group->refcnt));
> 
> This kind of implies that the representative device doesn't count
> against the refcount, which seems wrong.

It is, fixed in upcoming revision.

> > +   kobject_put(group->devices_kobj);
> > +   kobject_put(&group->kobj);
> > +}
> > +
> > +bool iommu_group_empty(struct iommu_group *group)
> > +{
> > +   return (0 == atomic_read(&group->refcnt));
> > +}
> > +
> > +int iommu_group_add_device(struct iommu_group *group, struct device *dev)
> > +{
> > +   int ret;
> > +
> > +   atomic_inc(&group->refcnt);
> > +
> > +   ret = sysfs_create_link(&dev->kobj, &group->kobj, "iommu_group");
> > +   if (ret)
> > +           return ret;
> > +
> > +   ret = sysfs_create_link(group->devices_kobj, &dev->kobj,
> > +                                kobject_name(&dev->kobj));
> > +   if (ret) {
> > +           sysfs_remove_link(&dev->kobj, "iommu_group");
> > +           return ret;
> > +   }
> > +
> > +   dev->iommu_group = group;
> > +
> > +   return 0;
> > +}
> > +
> > +void iommu_group_remove_device(struct device *dev)
> > +{
> > +   sysfs_remove_link(dev->iommu_group->devices_kobj,
> > +                     kobject_name(&dev->kobj));
> > +   sysfs_remove_link(&dev->kobj, "iommu_group");
> > +
> > +   atomic_dec(&dev->iommu_group->refcnt);
> > +   dev->iommu_group = NULL;
> >  }
> >  
> >  /**
> > @@ -335,9 +473,23 @@ EXPORT_SYMBOL_GPL(iommu_unmap);
> >  
> >  int iommu_device_group(struct device *dev, unsigned int *groupid)
> >  {
> > -   if (iommu_present(dev->bus) && dev->bus->iommu_ops->device_group)
> > -           return dev->bus->iommu_ops->device_group(dev, groupid);
> > +   if (dev->iommu_group) {
> > +           *groupid = dev->iommu_group->id;
> > +           return 0;
> > +   }
> >  
> >     return -ENODEV;
> >  }
> >  EXPORT_SYMBOL_GPL(iommu_device_group);
> > +
> > +static int __init iommu_init(void)
> > +{
> > +   iommu_group_kset = kset_create_and_add("iommu_groups", NULL, NULL);
> > +   idr_init(&iommu_group_idr);
> > +   mutex_init(&iommu_group_mutex);
> > +
> > +   BUG_ON(!iommu_group_kset);
> > +
> > +   return 0;
> > +}
> > +subsys_initcall(iommu_init);
> > diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> > index 2ee375c..24004d6 100644
> > --- a/include/linux/iommu.h
> > +++ b/include/linux/iommu.h
> > @@ -60,6 +60,8 @@ struct iommu_domain {
> >   * @iova_to_phys: translate iova to physical address
> >   * @domain_has_cap: domain capabilities query
> >   * @commit: commit iommu domain
> > + * @add_device: add device to iommu grouping
> > + * @remove_device: remove device from iommu grouping
> >   * @pgsize_bitmap: bitmap of supported page sizes
> >   */
> >  struct iommu_ops {
> > @@ -76,10 +78,25 @@ struct iommu_ops {
> >     int (*domain_has_cap)(struct iommu_domain *domain,
> >                           unsigned long cap);
> >     int (*device_group)(struct device *dev, unsigned int *groupid);
> > +   int (*add_device)(struct device *dev);
> > +   void (*remove_device)(struct device *dev);
> >     unsigned long pgsize_bitmap;
> >  };
> >  
> > +/**
> > + * struct iommu_group - groups of devices representing iommu visibility
> > + * @dma_dev: all dma from the group appears to the iommu using this source 
> > id
> > + * @kobj: iommu group node in sysfs
> > + * @devices_kobj: sysfs subdir node for linking devices
> > + * @refcnt: number of devices in group
> > + * @id: unique id number for the group (for easy sysfs listing)
> > + */
> >  struct iommu_group {
> > +   struct device *dma_dev;
> 
> So, a "representative" device works very nicely for the AMD and Intel
> IOMMUs.  But I'm not sure it makes sense for any IOMMU - we could
> point it to the bridge in the Power case, but I'm not sure if that
> really makes sense (particularly when it's a host bridge, not a p2p
> bridge).  In embedded cases it may make even less sense.

Yep, as noted in other reply, I've dropped this.

> I think it would be better to move this into iommu driver specific
> data (which I guess would mean adding a facility for iommu driver
> specific data, either with a private pointer or using container_of).

I was thinking a private pointer.  Embedding the iommu group into a
iommu structure probably wouldn't work well with the kobjects used to
represent the group.

> > +   struct kobject kobj;
> > +   struct kobject *devices_kobj;
> 
> The devices_kobj has the same lifetime as the group, so it might as
> well be a static member.

In my working version, devices_kobj is what holds the reference for the
group.  Documentation/kobject.txt also expressly forbids more than a
single embedded kobject.  Thanks,

Alex

> > +   atomic_t refcnt;
> > +   int id;
> >  };
> >  
> >  extern int bus_set_iommu(struct bus_type *bus, struct iommu_ops *ops);
> > @@ -101,6 +118,12 @@ extern int iommu_domain_has_cap(struct iommu_domain 
> > *domain,
> >  extern void iommu_set_fault_handler(struct iommu_domain *domain,
> >                                     iommu_fault_handler_t handler);
> >  extern int iommu_device_group(struct device *dev, unsigned int *groupid);
> > +extern struct iommu_group *iommu_group_alloc(struct device *dev);
> > +extern void iommu_group_free(struct iommu_group *group);
> > +extern bool iommu_group_empty(struct iommu_group *group);
> > +extern int iommu_group_add_device(struct iommu_group *group,
> > +                             struct device *dev);
> > +extern void iommu_group_remove_device(struct device *dev);
> >  
> >  /**
> >   * report_iommu_fault() - report about an IOMMU fault to the IOMMU 
> > framework
> > 
> 






reply via email to

[Prev in Thread] Current Thread [Next in Thread]