[Qemu-devel] [PATCH v2 4/5] acpi_piix4: Re-define PCI hotplug eject register read

[Alex Williamson]

The PCI hotplug eject register has always returned 0, so let's redefine
it as a hotplug feature register.  The existing model of using separate
up & down read-only registers and an eject via write to this register
becomes the base implementation.  As we make use of new interfaces we'll
set bits here to allow the BIOS and AML implementation to optimize for
the platform implementation.

Signed-off-by: Alex Williamson <address@hidden>
---

 docs/specs/acpi_pci_hotplug.txt |   12 ++++++++++--
 hw/acpi_piix4.c                 |    7 ++++---
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/docs/specs/acpi_pci_hotplug.txt b/docs/specs/acpi_pci_hotplug.txt
index 1883d63..a839434 100644
--- a/docs/specs/acpi_pci_hotplug.txt
+++ b/docs/specs/acpi_pci_hotplug.txt
@@ -27,8 +27,16 @@ events.  Read-only.
 PCI device eject (IO port 0xae08-0xae0b, 4-byte access):
 ----------------------------------------
 
-Used by ACPI BIOS _EJ0 method to request device removal. One bit per slot.
-Reads return 0.
+Write: Used by ACPI BIOS _EJ0 method to request device removal.
+One bit per slot.
+
+Read: Hotplug features register.  Used by platform to identify features
+available.  Current base feature set (no bits set):
+ - Read-only "up" register @0xae00, 4-byte access, bit per slot
+ - Read-only "down" register @0xae04, 4-byte access, bit per slot
+ - Read/write "eject" register @0xae08, 4-byte access,
+   write: bit per slot eject, read: hotplug feature set
+ - Read-only hotplug capable register @0xae0c, 4-byte access, bit per slot
 
 PCI removability status (IO port 0xae0c-0xae0f, 4-byte access):
 -----------------------------------------------
diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index 5d3b0ba..11c1f85 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -511,9 +511,10 @@ static uint32_t pci_down_read(void *opaque, uint32_t addr)
     return val;
 }
 
-static uint32_t pciej_read(void *opaque, uint32_t addr)
+static uint32_t pci_features_read(void *opaque, uint32_t addr)
 {
-    PIIX4_DPRINTF("pciej read %x\n", addr);
+    /* No feature defined yet */
+    PIIX4_DPRINTF("pci_features_read %x\n", 0);
     return 0;
 }
 
@@ -545,7 +546,7 @@ static void piix4_acpi_system_hot_add_init(PCIBus *bus, 
PIIX4PMState *s)
     register_ioport_read(PCI_DOWN_BASE, 4, 4, pci_down_read, s);
 
     register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, s);
-    register_ioport_read(PCI_EJ_BASE, 4, 4,  pciej_read, s);
+    register_ioport_read(PCI_EJ_BASE, 4, 4,  pci_features_read, s);
 
     register_ioport_read(PCI_RMV_BASE, 4, 4,  pcirmv_read, s);