Re: [Qemu-devel] [PATCH] hw/vexpress.c: Add NOR flash model

[Peter Maydell]

On 20 March 2012 14:57, Liming Wang <address@hidden> wrote:
> Vexpress motherboard has two 2x16 NOR flash, but pflash_cfi01
> doesn't support interleaving, so here only models two 1x32 flash.
> Although it's not exactly modeled, it works fine for running linux.
>
> Signed-off-by: Liming Wang <address@hidden>
> ---
>  hw/vexpress.c |   19 +++++++++++++++++--
>  1 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/hw/vexpress.c b/hw/vexpress.c
> index b9aafec..921b01b 100644
> --- a/hw/vexpress.c
> +++ b/hw/vexpress.c
> @@ -29,9 +29,13 @@
>  #include "sysemu.h"
>  #include "boards.h"
>  #include "exec-memory.h"
> +#include "flash.h"
> +#include "blockdev.h"
>
>  #define VEXPRESS_BOARD_ID 0x8e0
>
> +#define VEXPRESS_FLASH_SIZE 0x04000000
> +
>  static struct arm_boot_info vexpress_binfo;
>
>  /* Address maps for peripherals:
> @@ -355,6 +359,9 @@ static void vexpress_common_init(const VEDBoardInfo 
> *daughterboard,
>     MemoryRegion *vram = g_new(MemoryRegion, 1);
>     MemoryRegion *sram = g_new(MemoryRegion, 1);
>     const target_phys_addr_t *map = daughterboard->motherboard_map;
> +    DriveInfo *dinfo = NULL;
> +    uint32_t sector_len = 256 * 1024;
> +    int i = 0;
>
>     daughterboard->init(daughterboard, ram_size, cpu_model, pic, &proc_id);
>
> @@ -405,9 +412,17 @@ static void vexpress_common_init(const VEDBoardInfo 
> *daughterboard,
>
>     sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
>
> -    /* VE_NORFLASH0: not modelled */
> +    for(i = 0; i < 2; i++) {
> +       dinfo = drive_get(IF_PFLASH, 0, i);
> +        if (dinfo) {
> +           pflash_cfi01_register(((i == 0) ? map[VE_NORFLASH0] : 
> map[VE_NORFLASH1]), NULL,
> +                           ((i == 0) ? "vexpress.flash0" : 
> "vexpress:flash1"),
> +                           VEXPRESS_FLASH_SIZE, dinfo->bdrv, sector_len,
> +                           VEXPRESS_FLASH_SIZE / sector_len, 4,
> +                           0, 0x89, 0x89, 0x19, 0);
> +       }
> +    }

As it stands this will stick flash0 over the top of RAM at address
zero on the vexpress-a15, since there VE_NORFLASH0 is 0. I think
that was a mistake, and we should have it in line with the legacy
memory map, ie NORFLASH0 at 0x0800000 (and drop NORFLASH0ALIAS).

What's your use case for this? Do we need to/want to implement
the memory remapping so you can have flash at address 0 and
boot out of it?

-- PMM