[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 1/3] Add support for 64bit ARM system registe
From: |
Michael Roth |
Subject: |
Re: [Qemu-devel] [PATCH v2 1/3] Add support for 64bit ARM system registers |
Date: |
Wed, 14 Mar 2012 14:06:15 -0500 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Wed, Mar 14, 2012 at 01:57:47PM -0500, Michael Roth wrote:
> On Wed, Mar 14, 2012 at 05:00:02PM +0400, Alexey Starikovskiy wrote:
> > Signed-off-by: Alexey Starikovskiy<address@hidden>
> > ---
> > target-arm/cpu.h | 10 ++++------
> > target-arm/helper.c | 14 +++++++-------
> > target-arm/machine.c | 16 ++++++----------
> > 3 files changed, 17 insertions(+), 23 deletions(-)
> >
> > diff --git a/target-arm/cpu.h b/target-arm/cpu.h
> > index 0d9b39c..0298a98 100644
> > --- a/target-arm/cpu.h
> > +++ b/target-arm/cpu.h
> > @@ -117,11 +117,9 @@ typedef struct CPUARMState {
> > uint32_t c1_coproc; /* Coprocessor access register. */
> > uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
> > uint32_t c1_scr; /* secure config register. */
> > - uint32_t c2_base0; /* MMU translation table base 0. */
> > - uint32_t c2_base1; /* MMU translation table base 1. */
> > + uint64_t c2_base0; /* MMU translation table base 0. */
> > + uint64_t c2_base1; /* MMU translation table base 1. */
> > uint32_t c2_control; /* MMU translation table base control. */
> > - uint32_t c2_mask; /* MMU translation table base selection mask. */
> > - uint32_t c2_base_mask; /* MMU translation table base 0 mask. */
> > uint32_t c2_data; /* MPU data cachable bits. */
> > uint32_t c2_insn; /* MPU instruction cachable bits. */
> > uint32_t c3; /* MMU domain access control register
> > @@ -131,7 +129,7 @@ typedef struct CPUARMState {
> > uint32_t c6_region[8]; /* MPU base/size registers. */
> > uint32_t c6_insn; /* Fault address registers. */
> > uint32_t c6_data;
> > - uint32_t c7_par; /* Translation result. */
> > + uint64_t c7_par; /* Translation result. */
> > uint32_t c9_insn; /* Cache lockdown registers. */
> > uint32_t c9_data;
> > uint32_t c9_pmcr; /* performance monitor control register */
> > @@ -455,7 +453,7 @@ void cpu_arm_set_cp_io(CPUARMState *env, int cpnum,
> > #define cpu_signal_handler cpu_arm_signal_handler
> > #define cpu_list arm_cpu_list
> >
> > -#define CPU_SAVE_VERSION 6
> > +#define CPU_SAVE_VERSION 7
> >
> > /* MMU modes definitions */
> > #define MMU_MODE0_SUFFIX _kernel
> > diff --git a/target-arm/helper.c b/target-arm/helper.c
> > index abe1c30..d190104 100644
> > --- a/target-arm/helper.c
> > +++ b/target-arm/helper.c
> > @@ -325,7 +325,6 @@ void cpu_reset(CPUARMState *env)
> > }
> > }
> > env->vfp.xregs[ARM_VFP_FPEXC] = 0;
> > - env->cp15.c2_base_mask = 0xffffc000u;
> > /* v7 performance monitor control register: same implementor
> > * field as main ID register, and we implement no event counters.
> > */
> > @@ -1050,12 +1049,15 @@ static inline int check_ap(CPUState *env, int ap,
> > int domain_prot,
> > static uint32_t get_level1_table_address(CPUState *env, uint32_t address)
> > {
> > uint32_t table;
> > + int t0size = env->cp15.c2_control& 0x7;
> > + uint32_t mask = ~(((uint32_t)0xffffffffu)>> t0size);
> >
> > - if (address& env->cp15.c2_mask)
> > + if (address& mask) {
> > table = env->cp15.c2_base1& 0xffffc000;
> > - else
> > - table = env->cp15.c2_base0& env->cp15.c2_base_mask;
> > -
> > + } else {
> > + mask = ~((uint32_t)0x3fffu>> t0size);
> > + table = env->cp15.c2_base0& mask;
> > + }
> > table |= (address>> 18)& 0x3ffc;
> > return table;
> > }
> > @@ -1531,8 +1533,6 @@ void HELPER(set_cp15)(CPUState *env, uint32_t insn,
> > uint32_t val)
> > case 2:
> > val&= 7;
> > env->cp15.c2_control = val;
> > - env->cp15.c2_mask = ~(((uint32_t)0xffffffffu)>> val);
> > - env->cp15.c2_base_mask = ~((uint32_t)0x3fffu>> val);
> > break;
> > default:
> > goto bad_reg;
> > diff --git a/target-arm/machine.c b/target-arm/machine.c
> > index f66b8df..8fa738e 100644
> > --- a/target-arm/machine.c
> > +++ b/target-arm/machine.c
> > @@ -27,11 +27,9 @@ void cpu_save(QEMUFile *f, void *opaque)
> > qemu_put_be32(f, env->cp15.c1_coproc);
> > qemu_put_be32(f, env->cp15.c1_xscaleauxcr);
> > qemu_put_be32(f, env->cp15.c1_scr);
> > - qemu_put_be32(f, env->cp15.c2_base0);
> > - qemu_put_be32(f, env->cp15.c2_base1);
> > + qemu_put_be64(f, env->cp15.c2_base0);
> > + qemu_put_be64(f, env->cp15.c2_base1);
> > qemu_put_be32(f, env->cp15.c2_control);
> > - qemu_put_be32(f, env->cp15.c2_mask);
> > - qemu_put_be32(f, env->cp15.c2_base_mask);
> > qemu_put_be32(f, env->cp15.c2_data);
> > qemu_put_be32(f, env->cp15.c2_insn);
> > qemu_put_be32(f, env->cp15.c3);
> > @@ -42,7 +40,7 @@ void cpu_save(QEMUFile *f, void *opaque)
> > }
> > qemu_put_be32(f, env->cp15.c6_insn);
> > qemu_put_be32(f, env->cp15.c6_data);
> > - qemu_put_be32(f, env->cp15.c7_par);
> > + qemu_put_be64(f, env->cp15.c7_par);
> > qemu_put_be32(f, env->cp15.c9_insn);
> > qemu_put_be32(f, env->cp15.c9_data);
> > qemu_put_be32(f, env->cp15.c9_pmcr);
> > @@ -145,11 +143,9 @@ int cpu_load(QEMUFile *f, void *opaque, int version_id)
> > env->cp15.c1_coproc = qemu_get_be32(f);
> > env->cp15.c1_xscaleauxcr = qemu_get_be32(f);
> > env->cp15.c1_scr = qemu_get_be32(f);
> > - env->cp15.c2_base0 = qemu_get_be32(f);
> > - env->cp15.c2_base1 = qemu_get_be32(f);
> > + env->cp15.c2_base0 = qemu_get_be64(f);
> > + env->cp15.c2_base1 = qemu_get_be64(f);
>
> This breaks old -> new migration. Should CPU_SAVE_VERSION a do this
> conditionally on version_id >= CPU_SAVE_VERSION
Heh, let's try that again. Should *increment* CPU_SAVE_VERSION *and*
Also, historically I guess arm just bails on old->new but that seems wrong.
Either we need to increment though.
>
> > env->cp15.c2_control = qemu_get_be32(f);
> > - env->cp15.c2_mask = qemu_get_be32(f);
> > - env->cp15.c2_base_mask = qemu_get_be32(f);
> > env->cp15.c2_data = qemu_get_be32(f);
> > env->cp15.c2_insn = qemu_get_be32(f);
> > env->cp15.c3 = qemu_get_be32(f);
> > @@ -160,7 +156,7 @@ int cpu_load(QEMUFile *f, void *opaque, int version_id)
> > }
> > env->cp15.c6_insn = qemu_get_be32(f);
> > env->cp15.c6_data = qemu_get_be32(f);
> > - env->cp15.c7_par = qemu_get_be32(f);
> > + env->cp15.c7_par = qemu_get_be64(f);
>
> Here too.
>
> > env->cp15.c9_insn = qemu_get_be32(f);
> > env->cp15.c9_data = qemu_get_be32(f);
> > env->cp15.c9_pmcr = qemu_get_be32(f);
> >
> >
> >
- [Qemu-devel] [PATCH v2 3/3] Minimal ARM LPAE support., (continued)