qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH 1/4] usb-desc: fix user trigerrable segfaults (!


From: Alon Levy
Subject: Re: [Qemu-devel] [PATCH 1/4] usb-desc: fix user trigerrable segfaults (!config)
Date: Sun, 26 Feb 2012 17:12:35 +0100
User-agent: Mutt/1.5.21 (2010-09-15)

On Sun, Feb 26, 2012 at 05:09:21PM +0100, Alon Levy wrote:
> Check for dev->config being NULL in two places:
>  USB_REQ_GET_CONFIGURATION and USB_REQ_GET_STATUS.
> 
> The behavior of USB_REQ_GET_STATUS is unspecified in the Default state,
> that corresponds to dev->config being NULL (it defaults to NULL and is
> reset whenever a SET_CONFIGURATION with value 0, or attachment). I
> implemented it to correspond with the state before
> ed5a83ddd8c1d8ec7b1015315530cf29949e7c48, the commit moving SET_STATUS
> to usb-desc; if dev->config is not set we return whatever is in the
> first configuration.
> 
> The behavior of USB_REQ_GET_CONFIGURATION is also undefined before any
> SET_CONFIGURATION, but here we just return 0 (same as specified for the
> Address state).
> 
> A win7 guest failed to initialize the device before this patch,

s/the device/a usb-ccid device/

Using the default win7 smartcard driver.

> segfaulting when GET_STATUS was called with dev->config == NULL. With
> this patch the passthrough device still doesn't work but the failure is
> unrelated.
> 
> Signed-off-by: Alon Levy <address@hidden>
> ---
>  hw/usb-desc.c |   20 +++++++++++++++++---
>  1 files changed, 17 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/usb-desc.c b/hw/usb-desc.c
> index 3c3ed6a..ccf85ad 100644
> --- a/hw/usb-desc.c
> +++ b/hw/usb-desc.c
> @@ -536,7 +536,11 @@ int usb_desc_handle_control(USBDevice *dev, USBPacket *p,
>          break;
>  
>      case DeviceRequest | USB_REQ_GET_CONFIGURATION:
> -        data[0] = dev->config->bConfigurationValue;
> +        /*
> +         * 9.4.2: 0 should be returned if the device is unconfigured, 
> otherwise
> +         * the non zero value of bConfigurationValue.
> +         */
> +        data[0] = dev->config ? dev->config->bConfigurationValue : 0;
>          ret = 1;
>          break;
>      case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
> @@ -544,9 +548,18 @@ int usb_desc_handle_control(USBDevice *dev, USBPacket *p,
>          trace_usb_set_config(dev->addr, value, ret);
>          break;
>  
> -    case DeviceRequest | USB_REQ_GET_STATUS:
> +    case DeviceRequest | USB_REQ_GET_STATUS: {
> +        const USBDescConfig *config = dev->config ?
> +            dev->config : &dev->device->confs[0];
> +
>          data[0] = 0;
> -        if (dev->config->bmAttributes & 0x40) {
> +        /*
> +         * Default state: Device behavior when this request is received while
> +         *                the device is in the Default state is not 
> specified.
> +         * We return the same value that a configured device would return if
> +         * it used the first configuration.
> +         */
> +        if (config->bmAttributes & 0x40) {
>              data[0] |= 1 << USB_DEVICE_SELF_POWERED;
>          }
>          if (dev->remote_wakeup) {
> @@ -555,6 +568,7 @@ int usb_desc_handle_control(USBDevice *dev, USBPacket *p,
>          data[1] = 0x00;
>          ret = 2;
>          break;
> +    }
>      case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
>          if (value == USB_DEVICE_REMOTE_WAKEUP) {
>              dev->remote_wakeup = 0;
> -- 
> 1.7.9.1
> 
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]