[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v10 1/3] block: add the command line support
From: |
Ryan Harper |
Subject: |
Re: [Qemu-devel] [PATCH v10 1/3] block: add the command line support |
Date: |
Tue, 1 Nov 2011 17:43:18 -0500 |
User-agent: |
Mutt/1.5.6+20040907i |
* Zhi Yong Wu <address@hidden> [2011-11-01 02:44]:
> Signed-off-by: Zhi Yong Wu <address@hidden>
> ---
> block.c | 40 ++++++++++++++++++++++++++++++++++++++++
> block.h | 4 ++++
> block_int.h | 29 +++++++++++++++++++++++++++++
> blockdev.c | 32 ++++++++++++++++++++++++++++++++
> qemu-config.c | 24 ++++++++++++++++++++++++
> qemu-options.hx | 1 +
> 6 files changed, 130 insertions(+), 0 deletions(-)
I suggest changing the Subject of the patch to include something about
blkio limits. This will in searching git log later that this patch was
introducing blkio command line support.
>
> diff --git a/block.c b/block.c
> index 9bb236c..8f08dc5 100644
> --- a/block.c
> +++ b/block.c
> @@ -30,6 +30,7 @@
> #include "qjson.h"
> #include "qemu-coroutine.h"
> #include "qmp-commands.h"
> +#include "qemu-timer.h"
>
> #ifdef CONFIG_BSD
> #include <sys/types.h>
> @@ -105,6 +106,37 @@ int is_windows_drive(const char *filename)
> }
> #endif
>
> +/* throttling disk I/O limits */
> +static void bdrv_block_timer(void *opaque)
> +{
> + BlockDriverState *bs = opaque;
> +
> + qemu_co_queue_next(&bs->throttled_reqs);
> +}
> +
> +void bdrv_io_limits_enable(BlockDriverState *bs)
> +{
> + bs->io_limits_enabled = true;
We may want to move this to the end of the function so we don't raise
the flag that we're enabled until we're done setting everything up.
I don't think we'll race right now, but no reason not to move this to
the end.
> + qemu_co_queue_init(&bs->throttled_reqs);
> +
> + bs->block_timer = qemu_new_timer_ns(vm_clock, bdrv_block_timer, bs);
> + bs->slice_time = 5 * BLOCK_IO_SLICE_TIME;
> + bs->slice_start = qemu_get_clock_ns(vm_clock);
> + bs->slice_end = bs->slice_start + bs->slice_time;
> + memset(&bs->io_disps, 0, sizeof(bs->io_disps));
> +}
> +
> +bool bdrv_io_limits_enabled(BlockDriverState *bs)
> +{
> + BlockIOLimit *io_limits = &bs->io_limits;
> + return io_limits->bps[BLOCK_IO_LIMIT_READ]
> + || io_limits->bps[BLOCK_IO_LIMIT_WRITE]
> + || io_limits->bps[BLOCK_IO_LIMIT_TOTAL]
> + || io_limits->iops[BLOCK_IO_LIMIT_READ]
> + || io_limits->iops[BLOCK_IO_LIMIT_WRITE]
> + || io_limits->iops[BLOCK_IO_LIMIT_TOTAL];
> +}
> +
> /* check if the path starts with "<protocol>:" */
> static int path_has_protocol(const char *path)
> {
> @@ -1519,6 +1551,14 @@ void bdrv_get_geometry_hint(BlockDriverState *bs,
> *psecs = bs->secs;
> }
>
> +/* throttling disk io limits */
> +void bdrv_set_io_limits(BlockDriverState *bs,
> + BlockIOLimit *io_limits)
> +{
> + bs->io_limits = *io_limits;
> + bs->io_limits_enabled = bdrv_io_limits_enabled(bs);
> +}
> +
> /* Recognize floppy formats */
> typedef struct FDFormat {
> FDriveType drive;
> diff --git a/block.h b/block.h
> index 38cd748..bc8315d 100644
> --- a/block.h
> +++ b/block.h
> @@ -89,6 +89,10 @@ void bdrv_info(Monitor *mon, QObject **ret_data);
> void bdrv_stats_print(Monitor *mon, const QObject *data);
> void bdrv_info_stats(Monitor *mon, QObject **ret_data);
>
> +/* disk I/O throttling */
> +void bdrv_io_limits_enable(BlockDriverState *bs);
> +bool bdrv_io_limits_enabled(BlockDriverState *bs);
> +
> void bdrv_init(void);
> void bdrv_init_with_whitelist(void);
> BlockDriver *bdrv_find_protocol(const char *filename);
> diff --git a/block_int.h b/block_int.h
> index f4547f6..b835ef6 100644
> --- a/block_int.h
> +++ b/block_int.h
> @@ -34,6 +34,12 @@
> #define BLOCK_FLAG_ENCRYPT 1
> #define BLOCK_FLAG_COMPAT6 4
>
> +#define BLOCK_IO_LIMIT_READ 0
> +#define BLOCK_IO_LIMIT_WRITE 1
> +#define BLOCK_IO_LIMIT_TOTAL 2
> +
> +#define BLOCK_IO_SLICE_TIME 100000000
> +
> #define BLOCK_OPT_SIZE "size"
> #define BLOCK_OPT_ENCRYPT "encryption"
> #define BLOCK_OPT_COMPAT6 "compat6"
> @@ -50,6 +56,16 @@ typedef struct AIOPool {
> BlockDriverAIOCB *free_aiocb;
> } AIOPool;
>
> +typedef struct BlockIOLimit {
> + uint64_t bps[3];
> + uint64_t iops[3];
> +} BlockIOLimit;
> +
> +typedef struct BlockIODisp {
> + uint64_t bytes[2];
> + uint64_t ios[2];
> +} BlockIODisp;
> +
> struct BlockDriver {
> const char *format_name;
> int instance_size;
> @@ -184,6 +200,16 @@ struct BlockDriverState {
>
> void *sync_aiocb;
>
> + /* the time for latest disk I/O */
> + int64_t slice_time;
> + int64_t slice_start;
> + int64_t slice_end;
> + BlockIOLimit io_limits;
> + BlockIODisp io_disps;
> + CoQueue throttled_reqs;
> + QEMUTimer *block_timer;
> + bool io_limits_enabled;
> +
> /* I/O stats (display with "info blockstats"). */
> uint64_t nr_bytes[BDRV_MAX_IOTYPE];
> uint64_t nr_ops[BDRV_MAX_IOTYPE];
> @@ -227,6 +253,9 @@ void *qemu_aio_get(AIOPool *pool, BlockDriverState *bs,
> BlockDriverCompletionFunc *cb, void *opaque);
> void qemu_aio_release(void *p);
>
> +void bdrv_set_io_limits(BlockDriverState *bs,
> + BlockIOLimit *io_limits);
> +
> #ifdef _WIN32
> int is_windows_drive(const char *filename);
> #endif
> diff --git a/blockdev.c b/blockdev.c
> index 0827bf7..faf8c56 100644
> --- a/blockdev.c
> +++ b/blockdev.c
> @@ -235,6 +235,9 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
> int on_read_error, on_write_error;
> const char *devaddr;
> DriveInfo *dinfo;
> + BlockIOLimit io_limits;
> + bool bps_iol;
> + bool iops_iol;
> int snapshot = 0;
> int ret;
>
> @@ -353,6 +356,32 @@ DriveInfo *drive_init(QemuOpts *opts, int
> default_to_scsi)
> }
> }
>
> + /* disk I/O throttling */
> + io_limits.bps[BLOCK_IO_LIMIT_TOTAL] =
> + qemu_opt_get_number(opts, "bps", 0);
> + io_limits.bps[BLOCK_IO_LIMIT_READ] =
> + qemu_opt_get_number(opts, "bps_rd", 0);
> + io_limits.bps[BLOCK_IO_LIMIT_WRITE] =
> + qemu_opt_get_number(opts, "bps_wr", 0);
> + io_limits.iops[BLOCK_IO_LIMIT_TOTAL] =
> + qemu_opt_get_number(opts, "iops", 0);
> + io_limits.iops[BLOCK_IO_LIMIT_READ] =
> + qemu_opt_get_number(opts, "iops_rd", 0);
> + io_limits.iops[BLOCK_IO_LIMIT_WRITE] =
> + qemu_opt_get_number(opts, "iops_wr", 0);
> +
> + bps_iol = (io_limits.bps[BLOCK_IO_LIMIT_TOTAL] != 0)
> + && ((io_limits.bps[BLOCK_IO_LIMIT_READ] != 0)
> + || (io_limits.bps[BLOCK_IO_LIMIT_WRITE] != 0));
> + iops_iol = (io_limits.iops[BLOCK_IO_LIMIT_TOTAL] != 0)
> + && ((io_limits.iops[BLOCK_IO_LIMIT_READ] != 0)
> + || (io_limits.iops[BLOCK_IO_LIMIT_WRITE] != 0));
> + if (bps_iol || iops_iol) {
> + error_report("bps(iops) and bps_rd/bps_wr(iops_rd/iops_wr)"
> + "cannot be used at the same time");
> + return NULL;
> + }
> +
How about extracting this section into the bdrv_set_io_limits() function or some
other common setting function. This should be the same code that's used when
modifying/setting these values via the monitor as well (minus how you obtain the
input values - option parsings vs. monitor values).
> on_write_error = BLOCK_ERR_STOP_ENOSPC;
> if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
> if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type
> != IF_NONE) {
> @@ -460,6 +489,9 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
>
> bdrv_set_on_error(dinfo->bdrv, on_read_error, on_write_error);
>
> + /* disk I/O throttling */
> + bdrv_set_io_limits(dinfo->bdrv, &io_limits);
> +
> switch(type) {
> case IF_IDE:
> case IF_SCSI:
> diff --git a/qemu-config.c b/qemu-config.c
> index 597d7e1..1aa080f 100644
> --- a/qemu-config.c
> +++ b/qemu-config.c
> @@ -85,6 +85,30 @@ static QemuOptsList qemu_drive_opts = {
> .name = "readonly",
> .type = QEMU_OPT_BOOL,
> .help = "open drive file as read-only",
> + },{
> + .name = "iops",
> + .type = QEMU_OPT_NUMBER,
> + .help = "limit total I/O operations per second",
> + },{
> + .name = "iops_rd",
> + .type = QEMU_OPT_NUMBER,
> + .help = "limit read operations per second",
> + },{
> + .name = "iops_wr",
> + .type = QEMU_OPT_NUMBER,
> + .help = "limit write operations per second",
> + },{
> + .name = "bps",
> + .type = QEMU_OPT_NUMBER,
> + .help = "limit total bytes per second",
> + },{
> + .name = "bps_rd",
> + .type = QEMU_OPT_NUMBER,
> + .help = "limit read bytes per second",
> + },{
> + .name = "bps_wr",
> + .type = QEMU_OPT_NUMBER,
> + .help = "limit write bytes per second",
> },
> { /* end of list */ }
> },
> diff --git a/qemu-options.hx b/qemu-options.hx
> index 681eaf1..25a7be7 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -136,6 +136,7 @@ DEF("drive", HAS_ARG, QEMU_OPTION_drive,
> "
> [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
> " [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
> " [,readonly=on|off]\n"
> + "
> [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]\n"
> " use 'file' as a drive image\n", QEMU_ARCH_ALL)
> STEXI
> @item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
> --
> 1.7.6
>
--
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
address@hidden