Re: [Qemu-devel] [PATCH v3 2/2] hw/vexpress.c: Add model of ARM Versatile Express board

[Aurelien Jarno]

On Mon, Mar 07, 2011 at 11:10:32AM +0000, Peter Maydell wrote:
> Add a model of the ARM Versatile Express board (with A9MPx4
> daughterboard).
> 
> Signed-off-by: Peter Maydell <address@hidden>
> ---
>  Makefile.target |    1 +
>  hw/vexpress.c   |  224 
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 225 insertions(+), 0 deletions(-)
>  create mode 100644 hw/vexpress.c

Thanks, applied.

> diff --git a/Makefile.target b/Makefile.target
> index 220589e..949bd4e 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -315,6 +315,7 @@ obj-arm-y += framebuffer.o
>  obj-arm-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o
>  obj-arm-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
>  obj-arm-y += syborg_virtio.o
> +obj-arm-y += vexpress.o
>  
>  obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
>  obj-sh4-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o
> diff --git a/hw/vexpress.c b/hw/vexpress.c
> new file mode 100644
> index 0000000..9ffd332
> --- /dev/null
> +++ b/hw/vexpress.c
> @@ -0,0 +1,224 @@
> +/*
> + * ARM Versatile Express emulation.
> + *
> + * Copyright (c) 2010 - 2011 B Labs Ltd.
> + * Copyright (c) 2011 Linaro Limited
> + * Written by Bahadir Balban, Amit Mahajan, Peter Maydell
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License version 2 as
> + *  published by the Free Software Foundation.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License along
> + *  with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "sysbus.h"
> +#include "arm-misc.h"
> +#include "primecell.h"
> +#include "devices.h"
> +#include "net.h"
> +#include "sysemu.h"
> +#include "boards.h"
> +
> +#define SMP_BOOT_ADDR 0xe0000000
> +
> +#define VEXPRESS_BOARD_ID 0x8e0
> +
> +static struct arm_boot_info vexpress_binfo = {
> +    .smp_loader_start = SMP_BOOT_ADDR,
> +};
> +
> +static void vexpress_a9_init(ram_addr_t ram_size,
> +                     const char *boot_device,
> +                     const char *kernel_filename, const char *kernel_cmdline,
> +                     const char *initrd_filename, const char *cpu_model)
> +{
> +    CPUState *env = NULL;
> +    ram_addr_t ram_offset, vram_offset, sram_offset;
> +    DeviceState *dev, *sysctl;
> +    SysBusDevice *busdev;
> +    qemu_irq *irqp;
> +    qemu_irq pic[64];
> +    int n;
> +    qemu_irq cpu_irq[4];
> +    uint32_t proc_id;
> +    uint32_t sys_id;
> +    ram_addr_t low_ram_size, vram_size, sram_size;
> +
> +    if (!cpu_model) {
> +        cpu_model = "cortex-a9";
> +    }
> +
> +    for (n = 0; n < smp_cpus; n++) {
> +        env = cpu_init(cpu_model);
> +        if (!env) {
> +            fprintf(stderr, "Unable to find CPU definition\n");
> +            exit(1);
> +        }
> +        irqp = arm_pic_init_cpu(env);
> +        cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
> +    }
> +
> +    if (ram_size > 0x40000000) {
> +        /* 1GB is the maximum the address space permits */
> +        fprintf(stderr, "vexpress: cannot model more than 1GB RAM\n");
> +        exit(1);
> +    }
> +
> +    ram_offset = qemu_ram_alloc(NULL, "vexpress.highmem", ram_size);
> +    low_ram_size = ram_size;
> +    if (low_ram_size > 0x4000000) {
> +        low_ram_size = 0x4000000;
> +    }
> +    /* RAM is from 0x60000000 upwards. The bottom 64MB of the
> +     * address space should in theory be remappable to various
> +     * things including ROM or RAM; we always map the RAM there.
> +     */
> +    cpu_register_physical_memory(0x0, low_ram_size, ram_offset | IO_MEM_RAM);
> +    cpu_register_physical_memory(0x60000000, ram_size,
> +                                 ram_offset | IO_MEM_RAM);
> +
> +    /* 0x1e000000 A9MPCore (SCU) private memory region */
> +    dev = qdev_create(NULL, "a9mpcore_priv");
> +    qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
> +    qdev_init_nofail(dev);
> +    busdev = sysbus_from_qdev(dev);
> +    vexpress_binfo.smp_priv_base = 0x1e000000;
> +    sysbus_mmio_map(busdev, 0, vexpress_binfo.smp_priv_base);
> +    for (n = 0; n < smp_cpus; n++) {
> +        sysbus_connect_irq(busdev, n, cpu_irq[n]);
> +    }
> +    /* Interrupts [42:0] are from the motherboard;
> +     * [47:43] are reserved; [63:48] are daughterboard
> +     * peripherals. Note that some documentation numbers
> +     * external interrupts starting from 32 (because the
> +     * A9MP has internal interrupts 0..31).
> +     */
> +    for (n = 0; n < 64; n++) {
> +        pic[n] = qdev_get_gpio_in(dev, n);
> +    }
> +
> +    /* Motherboard peripherals CS7 : 0x10000000 .. 0x10020000 */
> +    sys_id = 0x1190f500;
> +    proc_id = 0x0c000191;
> +
> +    /* 0x10000000 System registers */
> +    sysctl = qdev_create(NULL, "realview_sysctl");
> +    qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
> +    qdev_init_nofail(sysctl);
> +    qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
> +    sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
> +
> +    /* 0x10001000 SP810 system control */
> +    /* 0x10002000 serial bus PCI */
> +    /* 0x10004000 PL041 audio */
> +
> +    dev = sysbus_create_varargs("pl181", 0x10005000, pic[9], pic[10], NULL);
> +    /* Wire up MMC card detect and read-only signals */
> +    qdev_connect_gpio_out(dev, 0,
> +                          qdev_get_gpio_in(sysctl, 
> ARM_SYSCTL_GPIO_MMC_WPROT));
> +    qdev_connect_gpio_out(dev, 1,
> +                          qdev_get_gpio_in(sysctl, 
> ARM_SYSCTL_GPIO_MMC_CARDIN));
> +
> +    sysbus_create_simple("pl050_keyboard", 0x10006000, pic[12]);
> +    sysbus_create_simple("pl050_mouse", 0x10007000, pic[13]);
> +
> +    sysbus_create_simple("pl011", 0x10009000, pic[5]);
> +    sysbus_create_simple("pl011", 0x1000a000, pic[6]);
> +    sysbus_create_simple("pl011", 0x1000b000, pic[7]);
> +    sysbus_create_simple("pl011", 0x1000c000, pic[8]);
> +
> +    /* 0x1000f000 SP805 WDT */
> +
> +    sysbus_create_simple("sp804", 0x10011000, pic[2]);
> +    sysbus_create_simple("sp804", 0x10012000, pic[3]);
> +
> +    /* 0x10016000 Serial Bus DVI */
> +
> +    sysbus_create_simple("pl031", 0x10017000, pic[4]); /* RTC */
> +
> +    /* 0x1001a000 Compact Flash */
> +
> +    /* 0x1001f000 PL111 CLCD (motherboard) */
> +
> +    /* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
> +
> +    /* 0x10020000 PL111 CLCD (daughterboard) */
> +    sysbus_create_simple("pl110", 0x10020000, pic[44]);
> +
> +    /* 0x10060000 AXI RAM */
> +    /* 0x100e0000 PL341 Dynamic Memory Controller */
> +    /* 0x100e1000 PL354 Static Memory Controller */
> +    /* 0x100e2000 System Configuration Controller */
> +
> +    sysbus_create_simple("sp804", 0x100e4000, pic[48]);
> +    /* 0x100e5000 SP805 Watchdog module */
> +    /* 0x100e6000 BP147 TrustZone Protection Controller */
> +    /* 0x100e9000 PL301 'Fast' AXI matrix */
> +    /* 0x100ea000 PL301 'Slow' AXI matrix */
> +    /* 0x100ec000 TrustZone Address Space Controller */
> +    /* 0x10200000 CoreSight debug APB */
> +    /* 0x1e00a000 PL310 L2 Cache Controller */
> +
> +    /* CS0: NOR0 flash          : 0x40000000 .. 0x44000000 */
> +    /* CS4: NOR1 flash          : 0x44000000 .. 0x48000000 */
> +    /* CS2: SRAM                : 0x48000000 .. 0x4a000000 */
> +    sram_size = 0x2000000;
> +    sram_offset = qemu_ram_alloc(NULL, "vexpress.sram", sram_size);
> +    cpu_register_physical_memory(0x48000000, sram_size,
> +                                 sram_offset | IO_MEM_RAM);
> +
> +    /* CS3: USB, ethernet, VRAM : 0x4c000000 .. 0x50000000 */
> +
> +    /* 0x4c000000 Video RAM */
> +    vram_size = 0x800000;
> +    vram_offset = qemu_ram_alloc(NULL, "vexpress.vram", vram_size);
> +    cpu_register_physical_memory(0x4c000000, vram_size,
> +                                 vram_offset | IO_MEM_RAM);
> +
> +    /* 0x4e000000 LAN9118 Ethernet */
> +    if (nd_table[0].vlan) {
> +        lan9118_init(&nd_table[0], 0x4e000000, pic[15]);
> +    }
> +
> +    /* 0x4f000000 ISP1761 USB */
> +
> +    /* ??? Hack to map an additional page of ram for the secondary CPU
> +       startup code.  I guess this works on real hardware because the
> +       BootROM happens to be in ROM/flash or in memory that isn't clobbered
> +       until after Linux boots the secondary CPUs.  */
> +    ram_offset = qemu_ram_alloc(NULL, "vexpress.hack", 0x1000);
> +    cpu_register_physical_memory(SMP_BOOT_ADDR, 0x1000,
> +                                 ram_offset | IO_MEM_RAM);
> +
> +    vexpress_binfo.ram_size = ram_size;
> +    vexpress_binfo.kernel_filename = kernel_filename;
> +    vexpress_binfo.kernel_cmdline = kernel_cmdline;
> +    vexpress_binfo.initrd_filename = initrd_filename;
> +    vexpress_binfo.nb_cpus = smp_cpus;
> +    vexpress_binfo.board_id = VEXPRESS_BOARD_ID;
> +    vexpress_binfo.loader_start = 0x60000000;
> +    arm_load_kernel(first_cpu, &vexpress_binfo);
> +}
> +
> +
> +static QEMUMachine vexpress_a9_machine = {
> +    .name = "vexpress-a9",
> +    .desc = "ARM Versatile Express for Cortex-A9",
> +    .init = vexpress_a9_init,
> +    .use_scsi = 1,
> +    .max_cpus = 4,
> +};
> +
> +static void vexpress_machine_init(void)
> +{
> +    qemu_register_machine(&vexpress_a9_machine);
> +}
> +
> +machine_init(vexpress_machine_init);
> -- 
> 1.7.1
> 
> 
> 

-- 
Aurelien Jarno                          GPG: 1024D/F1BCDB73
address@hidden                 http://www.aurel32.net