qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] Re: EFI console stopped working in Qemu 0.14.0


From: vagran
Subject: Re: [Qemu-devel] Re: EFI console stopped working in Qemu 0.14.0
Date: Sun, 06 Mar 2011 12:10:44 +0200
User-agent: Thunderbird 2.0.0.24 (X11/20101027)

When I trying to specify 64-bit EFI BIOS nothing happens on VGA
nor serial console. It seems that CPU is continuously restarting.

Build and host system is Ubuntu 9.10:
Linux AST-mobile 2.6.31-22-generic-pae #73-Ubuntu SMP Fri Feb 11 18:39:01 UTC 2011 i686 GNU/Linux

Qemu 0.14.0 was built with the following configuration options:
../src/configure --prefix=$PREFIX --target-list=x86_64-softmmu --source-path=../src --enable-kvm
--extra-cflags=-I$PREFIX/include --extra-ldflags=-L$PREFIX/lib

And launched:
qemu-system-x86_64 -L $PHOBOS_PREFIX/share/qemu/phobos64 -bios OVMF.fd -m 768 -cpu core2duo
-vga cirrus -monitor stdio -serial tcp::666,server -s -hdb $PHOBOS_PREFIX/share/qemu/phobos.disk -usb -enable-kvm

OVMF X64 is r11337.

"log cpu_reset" provides this information (continuously in a loop):
CPU Reset (CPU 0)
EAX=00000100 EBX=fffee0e4 ECX=c0000080 EDX=00000000
ESI=fffee2c4 EDI=00005042 EBP=fffee000 ESP=00000000
EIP=ffffff21 EFL=00010082 [--S----] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0008 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
CS =0010 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0008 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =0008 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
FS =0008 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
GS =0008 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT=     ffffff80 0000001f
IDT=     00000000 0000ffff
CR0=40000023 CR2=00000000 CR3=ffffe000 CR4=00000660
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
CCS=00000000 CCD=00000000 CCO=DYNAMIC
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00000000
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
Best regards,
Artyom.
Jordan Justen wrote:
On Thu, Mar 3, 2011 at 10:02, vagran <address@hidden> wrote:
  
I have taken EFI BIOS image from
http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=OVMF
32-bit version works perfectly. However 64-bit version for some reason
doesn't work on
qemu-system-x86_64.
    

Hi.  I was wondering if you could describe the OVMF issue you saw with
qemu-system-x86_64.

I tried 0.14.0 with OVMF X64 (r11337), and it was able to boot to the EFI shell.

I did see an issue while booting the 64-bit Ubuntu 10.10 live-cd, but
occurred on both the legacy (seabios) and uefi (ovmf) firmware.  With
kvm 0.14.0, in both cases the OS boots most of the way, but the
graphics do not start properly when X starts.

Thanks,

-Jordan
  

reply via email to

[Prev in Thread] Current Thread [Next in Thread]