[Qemu-devel] [Bug 697510] Re: Machine shut off after tons of lsi_scsi: error: MSG IN data too long

[TiCPU]

Some new informations, the IDE bus works for a while then the PC slows
down and finally backup fails and freeze most of the I/Os.

The underlying device is a Iomega REV 120 USB appearing as a CD-ROM, /dev/sr0 
and using FAT32 with 32k clusters.
The backup program is Symantec Backup Exec 11d

I worked around the problem by formatting the REV 120 back to UDF and
sharing it via Samba, BackupExec now backups to the REV via network.

I tried iSCSI and had problems too.

I attached all the minidumps, they all look the same.

** Attachment added: "Minidump.7z"
   
https://bugs.launchpad.net/qemu/+bug/697510/+attachment/1811123/+files/Minidump.7z

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/697510

Title:
  Machine shut off after tons of lsi_scsi: error: MSG IN data too long

Status in QEMU:
  New

Bug description:
  The problem mostly happens during our backup, syslog does not have any
  problematic messages.

  Host is Ubuntu 10.10 x86 64 bits
  Guest is Windows 2003 Server 32 bits
  Using Virtio and Red Hat driver I get a STOP screen 0x100000d1 and machine 
either reboot, stay frozen or shut off.
  Using SCSI the machine shuts off and I get tons of message on stdout;

  LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin 
QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 3500 -smp 
4,sockets=4,cores=1,threads=1 -name BMSRV0101 -uuid 
6ccbb5fa-5880-a1ab-3b7a-fb7ccc7c8ccf -nodefaults -chardev 
socket,id=monitor,path=/var/lib/libvirt/qemu/BMSRV0101.monitor,server,nowait 
-mon chardev=monitor,mode=readline -rtc base=localtime -boot c -device 
lsi,id=scsi0,bus=pci.0,addr=0x4 -drive 
if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device 
ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive 
file=/dev/vgUbuntu/vmBMSRV0101,if=none,id=drive-scsi0-0-0,boot=on,format=raw 
-device scsi-disk,bus=scsi0.0,scsi-id=0,drive=drive-scsi0-0-0,id=scsi0-0-0 
-device virtio-net-pci,vlan=0,id=net0,mac=52:54:00:5d:7b:07,bus=pci.0,addr=0x3 
-net tap,fd=63,vlan=0,name=hostnet0 -chardev pty,id=serial0 -device 
isa-serial,chardev=serial0 -usb -device usb-tablet,id=input0 -vnc 127.0.0.1:0 
-vga cirrus -device usb-host,hostbus=002,hostaddr=005,id=hostdev0 -device 
virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 
  char device redirected to /dev/pts/0
  pci_add_option_rom: failed to find romfile "pxe-virtio.bin"
  husb: open device 2.5
  husb: config #1 need -1
  husb: 1 interfaces claimed for configuration 1
  husb: grabbed usb device 2.5
  husb: config #1 need 1
  husb: 1 interfaces claimed for configuration 1

  lsi_scsi: error: Unimplemented message 0x00
  (x8)

  lsi_scsi: error: MSG IN data too long
  lsi_scsi: error: Unimplemented message 0x00
  (x760)

  lsi_scsi: error: MSG IN data too long
  lsi_scsi: error: MSG IN data too long
  kvm: /build/buildd/qemu-kvm-0.12.5+noroms/hw/lsi53c895a.c:512: lsi_do_dma: 
Assertion `s->current' failed.

  
  I can include minidump file if needed.
  I am currently using IDE and it seems OK.