[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] Re: [PATCH 3/3] mips: Expire late timers when reading c
From: |
Aurelien Jarno |
Subject: |
Re: [Qemu-devel] Re: [PATCH 3/3] mips: Expire late timers when reading cp0_count |
Date: |
Tue, 18 Jan 2011 11:52:33 +0100 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Tue, Jan 18, 2011 at 11:41:54AM +0100, Edgar E. Iglesias wrote:
> On Tue, Jan 18, 2011 at 11:36:25AM +0100, Aurelien Jarno wrote:
> > On Tue, Jan 18, 2011 at 01:33:00AM +0100, Edgar E. Iglesias wrote:
> > > On Tue, Jan 18, 2011 at 12:29:42AM +0100, address@hidden wrote:
> > > > From: Edgar E. Iglesias <address@hidden>
> > > >
> > > > When reading cp0_count from a timer with a late trigger that should
> > > > already have expired, expire it and raise the timer irq.
> > > >
> > > > This makes it possible for guest code (e.g, Linux) that first read
> > > > cp0_count, then compare it with cp0_compare and check for raised
> > > > timer interrupt lines to run reliably.
> > > >
> > > > Signed-off-by: Edgar E. Iglesias <address@hidden>
> > >
> > > Sorry sent the wrong version of this one. It's supposed to be the
> > > following:
> > >
> > > commit 139330de404209528712fd703952c0b5ad4459a1
> > > Author: Edgar E. Iglesias <address@hidden>
> > > Date: Tue Jan 18 00:12:22 2011 +0100
> > >
> > > mips: Expire late timers when reading cp0_count
> > >
> > > When reading cp0_count from a timer with a late trigger that should
> > > already have expired, expire it and raise the timer irq.
> > >
> > > This makes it possible for guest code (e.g, Linux) that first read
> > > cp0_count, then compare it with cp0_compare and check for raised
> > > timer interrupt lines to run reliably.
> > >
> > > Signed-off-by: Edgar E. Iglesias <address@hidden>
> > >
> > > diff --git a/hw/mips_timer.c b/hw/mips_timer.c
> > > index 8c32087..9c95f28 100644
> > > --- a/hw/mips_timer.c
> > > +++ b/hw/mips_timer.c
> > > @@ -69,9 +69,17 @@ uint32_t cpu_mips_get_count (CPUState *env)
> > > if (env->CP0_Cause & (1 << CP0Ca_DC)) {
> > > return env->CP0_Count;
> > > } else {
> > > + uint64_t now;
> > > +
> > > + now = qemu_get_clock(vm_clock);
> > > + if (qemu_timer_pending(env->timer)
> > > + && qemu_timer_expired(env->timer, now)) {
> > > + /* The timer has already expired. */
> > > + cpu_mips_timer_expire(env);
> > > + }
> > > +
> > > return env->CP0_Count +
> > > - (uint32_t)muldiv64(qemu_get_clock(vm_clock),
> > > - TIMER_FREQ, get_ticks_per_sec());
> > > + (uint32_t)muldiv64(now, TIMER_FREQ, get_ticks_per_sec());
> > > }
> > > }
> > >
> >
> > Given the TB is now ended after this instruction (due to patch 1), isn't
> > the interrupt handled before starting the next TB, where the interrupt
> > line (I guess CP0_Cause) read?
>
> Hi,
>
> The problem here is different. Due to host timing granularity, the
> timer might expire later than it's precise scheduled time. If that
> happens, get_count will return a count value that goes beyond the
> trigger time but the interrupt may come later (when the host timer
> expires).
>
> This patch catches that case and expires the timer in-band, raising
> the timer interrupt if needed.
>
Ok, thanks for the explanation.
Acked-by: Aurelien Jarno <address@hidden>
--
Aurelien Jarno GPG: 1024D/F1BCDB73
address@hidden http://www.aurel32.net
- [Qemu-devel] [PATCH 2/3] mips: Break out cpu_mips_timer_expire, (continued)