[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device |
Date: |
Mon, 8 Nov 2010 19:08:37 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Mon, Nov 08, 2010 at 07:00:15PM +0200, Gleb Natapov wrote:
> On Mon, Nov 08, 2010 at 06:26:33PM +0200, Michael S. Tsirkin wrote:
> > On Mon, Nov 08, 2010 at 07:52:12AM -0700, Alex Williamson wrote:
> > > On Mon, 2010-11-08 at 13:22 +0200, Michael S. Tsirkin wrote:
> > > > On Mon, Oct 04, 2010 at 03:53:11PM -0600, Alex Williamson wrote:
> > > > > pcibus_dev_print() was erroneously retrieving the device bus
> > > > > number from the secondary bus number offset of the device
> > > > > instead of the bridge above the device. This ends of landing
> > > > > in the 2nd byte of the 3rd BAR for devices, which thankfully
> > > > > is usually zero. pcibus_get_dev_path() copied this code,
> > > > > inheriting the same bug. pcibus_get_dev_path() is used for
> > > > > ramblock naming, so changing it can effect migration. However,
> > > > > I've only seen this byte be non-zero for an assigned device,
> > > > > which can't migrate anyway, so hopefully we won't run into
> > > > > any issues.
> > > > >
> > > > > Signed-off-by: Alex Williamson <address@hidden>
> > > >
> > > > Good catch. Applied.
> > > > I don't really see why do we put the dev path
> > > > in the bus object: why not let device supply its name?
> > >
> > > Because the device name is not unique. This came about from the
> > > discussion about how to create a canonical device path that Gleb and
> > > Markus are again trying to hash out. If we go up to the bus and get the
> > > bus address, we have a VM unique name. Unfortunately, it's difficult to
> > > define what the bus should print in all cases (ISA), but since they
> > > don't do hotplug and typically don't allocate ramblocks, we can mostly
> > > ignore it for this use case.
> > >
> > > > And I think this will affect nested bridges. However they are currently
> > > > broken anyway: we really must convert to topological names as bus number
> > > > is guest-assigned - they don't have to be unique, even.
> > >
> > > Yes, nested bridges are a problem. How can the seg/bus/devfn not be
> > > unique?
> >
> > Bus numbers for nested bridges are guest assigned. We start with 0 after
> > reset.
> >
> > > > What does fixing this involve? Just changing pcibus_get_dev_path?
> > >
> > > How do you plan to fix it? Don't forget that migration depends on these
> > > names, so some kind of compatibility layer would be required. Thanks,
> > >
> > > Alex
> >
> > Replace bus number with slot numbers of parent bridges up to the root.
> > This works for root bridge in a compatible way because bus number there
> > is hard-coded to 0.
> > IMO nested bridges are broken anyway, no way to be compatible there.
> >
> >
> > Gleb, Markus, I think the following should be sufficient for PCI. What
> > do you think? Also - do we need to update QMP/monitor to teach them to
> > work with these paths?
> >
>
> I am no longer use bus's get_dev_path callback for my purpose (I added
> another one get_fw_dev_path)
Why? Because get_dev_path is unstable? to avoid changing for migration?
So with this patch, you get to use it again.
IMO two ways to address devices is a bad idea.
> since it is used for migration
what is used for migration?
> it should
> be done for all buses to work properly. And by properly I mean produce
> full path from system root to the device itself recursively.
This is what the code does. Recursion is not needed here though.
> But what I
> learned is that by changing get_dev_path output you will break migration
> from older guest to newer once (something we have to support).
Well I think migration for sytems with nested buses are broken anyway:
it's just a new feature where we simply did not figure out the migration
andgle before the last release.
Without nesting my code returns exactly the existing output
so no, it's not broken.
> And of
> course, as Alex said already, you need to traverse bridges recursively
Well this is an implementation detail. loop is functionally equivalent,
only cleaner and easier to understand.
> and
> domain does not provide any meaningful information.
I dont understand yet, sorry. Code I posted returns exactly
what's there today. If domain does not provide any meaningful
information, How do things work then? And how do you address
roots on a system with multiple roots?
> > This is on top of Alex's patch, completely untested.
> >
> >
> > pci: fix device path for devices behind nested bridges
> >
> > We were using bus number in the device path, which is clearly
> > broken as this number is guest-assigned for all devices
> > except the root.
> >
> > Fix by using hierarchical list of slots, walking the path
> > from root down to device, instead. Add :00 as bus number
> > so that if there are no nested bridges, this is compatible
> > with what we have now.
> >
> > Signed-off-by: Michael S. Tsirkin <address@hidden>
> >
> > diff --git a/hw/pci.c b/hw/pci.c
> > index 7d12473..fa98d94 100644
> > --- a/hw/pci.c
> > +++ b/hw/pci.c
> > @@ -1826,13 +1826,45 @@ static void pcibus_dev_print(Monitor *mon,
> > DeviceState *dev, int indent)
> >
> > static char *pcibus_get_dev_path(DeviceState *dev)
> > {
> > - PCIDevice *d = (PCIDevice *)dev;
> > - char path[16];
> > -
> > - snprintf(path, sizeof(path), "%04x:%02x:%02x.%x",
> > - pci_find_domain(d->bus), pci_bus_num(d->bus),
> > - PCI_SLOT(d->devfn), PCI_FUNC(d->devfn));
> > -
> > - return strdup(path);
> > + PCIDevice *d = container_of(dev, PCIDevice, qdev);
> > + PCIDevice *t;
> > + int slot_depth;
> > + /* Path format: Domain:00:Slot:Slot....:Slot.Function.
> > + * 00 is added here to make this format compatible with
> > + * domain:Bus:Slot.Func for systems without nested PCI bridges.
> > + * Slot list specifies the slot numbers for all devices on the
> > + * path from root to the specific device. */
> > + int domain_len = strlen("DDDD:00");
> > + int func_len = strlen(".F");
> > + int slot_len = strlen(":SS");
> > + int path_len;
> > + char *path, *p;
> > +
> > + /* Calculate # of slots on path between device and root. */;
> > + slot_depth = 0;
> > + for (t = d; t; t = t->bus->parent_dev)
> > + ++slot_depth;
> > +
> > + path_len = domain_len + bus_len + slot_len * slot_depth + func_len;
> > +
> > + /* Allocate memory, fill in the terminating null byte. */
> > + path = malloc(path_len + 1 /* For '\0' */);
> > + path[path_len] = '\0';
> > +
> > + /* First field is the domain. */
> > + snprintf(path, domain_len, "%04x", pci_find_domain(d->bus));
> > +
> > + /* Leave space for slot numbers and fill in function number. */
> > + p = path + domain_len + slot_len * slot_depth;
> > + snprintf(p, func_len, ".%02x", PCI_FUNC(d->devfn));
> > +
> > + /* Fill in slot numbers. We walk up from device to root, so need to
> > print
> > + * them in the reverse order, last to first. */
> > + for (t = d; t; t = t->bus->parent_dev) {
> > + p -= slot_len;
> > + snprintf(p, slot_len, ":%x", PCI_SLOT(t->devfn));
> > + }
> > +
> > + return path;
> > }
> >
>
> --
> Gleb.
- [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Michael S. Tsirkin, 2010/11/08
- [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Alex Williamson, 2010/11/08
- [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Michael S. Tsirkin, 2010/11/08
- [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Gleb Natapov, 2010/11/08
- [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device,
Michael S. Tsirkin <=
- [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Gleb Natapov, 2010/11/08
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Isaku Yamahata, 2010/11/08
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Michael S. Tsirkin, 2010/11/09
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Markus Armbruster, 2010/11/19
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Gleb Natapov, 2010/11/19
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Michael S. Tsirkin, 2010/11/20
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Gleb Natapov, 2010/11/21
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Michael S. Tsirkin, 2010/11/21
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Gleb Natapov, 2010/11/21
- Re: [Qemu-devel] Re: [PATCH] PCI: Bus number from the bridge, not the device, Michael S. Tsirkin, 2010/11/21